• 한국광학회지
• /
• 제6권2호
• /
• pp.130-134
• /
• 1995

이득 선폭이 넓고 가공이 쉬원 고출력 제이저의 증폭 이득 매질로 유리한 Nd:glass 이득 매질의 소신호 이득 계수를 측정하고 이 Nd:glass를 이용하여 제작한 cavity-dumping형 레이저의 출력 특성을 조사하였다. 소신호 이득 계수를 측정하기 위해 Nd:glass, Pockels cell, 편광분할기 등을 포함하는 공진기를 구성하였으며, 측정된 소신호 이극 계수는 전기 입력 에너지가 100J일 때 $0.088 cm_{-1}$ 공진기의 왕복 내부 손실은 56%였다. Cavity-dumping형 레이저 공진기는 곡률반경이 2m인 두개의 전반사경과 Nd:glass, Pickels cell, 편광분할기, $\lambda/4$ plate 등으로 구성되었으며 제작된 레이저의 출력 에너지는 전기 입력 에너지가 140J일 때, 최대 0.85J이었고 출력 레이저 펄스폭은 8ns였다.

• 한국광학회지
• /
• 제3권4호
• /
• pp.222-226
• /
• 1992

$Ar^{+}$레이저로 펌핑되는 Nd:glass레이저를 제작하여 그 특성을 조사하였다. 레이저 공진기는 오목거울 두 개와 98% 고반사 평면경, 그리고 Brewster 각도로 놓인 Nd:glass 의 이득 매질로 구성되었으며, 효율적인 펌핑을 위해서 $Ar^{+}$레이저 광선을 공진기 길이 방향으로 입사하여 공진모우드의 beam waist에서 초점이 맺히도록 하였다. Nd:glass의 열존도도가 작아서 흡수된 펌핑빔에 의해 생성된 잔열로 인한 매질의 손상이 우려되기 때문에 mechanical chopper 로 펌핑빔을 100Hz로 끊어서 입사하여 잔열의 생성을 줄였다. 1.5W로 펌핑될 때 Nd:glass 레이저의 출력은 70mW이었고 발진이 되는 문턱에서의 펌핑파워는 520mW이었으며 slope efficiency는 7.4%이었다.

• 대한전기학회논문지
• /
• 제36권10호
• /
• pp.741-747
• /
• 1987

The high-power Nd:glass system with five-stage amplifier was designed and its amplification characteristics was studied for developing high-power Nd:glass laser system as an energy driver of inertial confinement fusion(ICF). In order to study the amplification characteristics of remporal and spacial Gaussian laser beam, the dependence of them on pumping efficiency and rod loss were studied and discussed. The output energy of this system using phosphate Nd glass rod(LHG-7,LHG-8) and silicate Nd glass rod(LSG-91H), respectively, was calculated by the computer simulation using Avizonis-Grotbeck and Frantz Nodvik equations. As results of this simulation, it was found that the shorter the risetime of laser pulse, the larger the amplification factor and that the larger peak value of laser pulse, the lower the amplification factor. The output inergies of 179J, 344J, and 7J were obtained by the designed five-stage amplified high-power Nd:glass laser system using glass rods of LHG-7,LHG-8, and LSG-91H, respectively. From the results it was found that the laser system using the LHG-8 glass rod was the most excellent one among the systems and the cross section for stimulated emission of the gain coefficient was essentially important parameter for the amplification characteristics.

• 한국재료학회지
• /
• 제11권7호
• /
• pp.545-549
• /
• 2001

고온 안정성의 유리계로 알려진 회토류 알루미나 규산염계중, Nd$_2$O$_3$-Al$_2$O$_3$-SiO$_2$(NdAS)계 유리의 응용범위를 찾고자 결정화유리를 제조하여 그 물성의 특성을 평가하였다. NdAS에 결정화제로 TiO$_2$를 첨가하여 내부결정화를 유도하여 생성된 결정화유리에 대하여 결정상과 잔류유리의 물리적, 열적, 기계적 물성을 측정하였다. NdAS-TiO$_2$유리계는 열처리와 조성 조건에 따라 생성된 표면 및 내부결정상은 같은 결정상을 갖는 것으로 X선회절의 결과로 확인되었으나, 알려 있지 않은 결정상으로 내부결정의 경우, 원자구성비는 $Nd_{4.6}Si_{7.2}Al_{4.0}Ti_{2.4}O_{32}$이었다. 결정화유리의 선팽창계수는 $5.4~6.2{\times}10^{-6}/^{\circ}C$ 정도로 경정성장이 일어날수록 증가되었다. 결정화유리중의 결정상의 경도와 탄성계수는각 각 12GPa, 220Gpa으로 나타난 것을 고려한다면 내부결정화에 의한 결정화유리의 물성은 고온 구조용 재료로 활용도가 넓을 것으로 본다.

• 한국재료학회지
• /
• 제18권2호
• /
• pp.107-111
• /
• 2008

[ $BaO{\cdot}Nd_2O_3{\cdot}5TiO_2$ ] (BNT) ceramics modified with a borate glass containing Ba, Nd and Ti as glass constituents were investigated with regard to their sintering behavior and microwave dielectric properties. An addition of iso-component glass significantly improved the sinterabilty of the BNT ceramics and lowered the sintering temperature. A maximum density of $5.29\;g/cm^3$ and an x-y shrinkage of 17% were obtained for BNT ceramics containing 10wt.% of the glass sintered at $1100^{\circ}C$. The dielectric composition without the glass additive was only slightly densified at $1100^{\circ}C$. The resulting sample exhibited two crystalline phases, $BaNd_2Ti_5O_{14}$ and $Ba_2Ti_9O_{20}$, regardless of sintering temperature and glass content. When >10wt.% glass was added, exaggerated grain growth with a less uniform microstructure was found, resulting in the subsequent reduction of the fired density and the dielectric properties. BNT ceramics containing 10wt.% of the isocomponent glass sintered at $1100^{\circ}C$ for 4 h showed promising dielectric properties of k = 71.3 and Q = 1,330.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.326-326
• /
• 2007

Influence of $Nd_2O_3$ addition to $ZnO-B_2O_3$-based glass on the water leaching resistance of the glass was first investigated. The optimized $Nd_2O_3-ZnO-B_2O_3$ (NZB) glass was ball milled for varying time, mixing with followed by $Al_2O_3$ crystalline phase to form $Al_2O_3$-NZB glass composites at $875^{\circ}C$ for 1h. Microwave dielectric properties of the composites were investigated as a function of the ball milling time of the NZB glass. Dielectric constant and quality factor were 5.70 and 9497 GHz, respectively, when the NZB glass was ball milled for 6h prior to mixing with $Al_2O_3$.

• 한국세라믹학회지
• /
• 제52권2호
• /
• pp.146-149
• /
• 2015

Silicate glasses with different $Nd_2O_3$ concentrations were prepared through conventional melt-quenching methods while PbS quantum dots (QDs) were precipitated through heat treatment. The peak wavelengths of absorption and the photoluminescence of PbS QDs shifted to the short-wavelength side as the concentration of $Nd_2O_3$ increased. The electron energy loss spectroscopy (EELS) indicated that $Nd^{3+}$ ions were preferentially distributed inside the PbS QDs instead of the glass matrix. In addition, there was no significant change in the lifetimes of the $Nd^{3+}:^4F_{3/2}$ fluorescence between the as-prepared glass ($607{\mu}s$) and the heat-treated glass($576{\mu}s$). $Nd^{3+}$ ions were surrounded by oxygen instead of sulfur and the Nd-O clusters probably acted as nucleating centers for the formation of PbS QDs inside the glasses.

• 한국세라믹학회지
• /
• 제30권5호
• /
• pp.339-346
• /
• 1993

Inproving laser efficiency, optimum content of Nd3+ which is active ion and effect of Cr3+ as a sensitizer are investigated in 60SiO2.30Li2O.10CaO host glass. The glasses are fabricated with the addition of Nd3+, Cr3+ and then optical properties such as absorption spectrum, fluorescence spectrum and fluorescence lifetime were studied. Finally, lasing efficiency was measured. From this study, optimum content of Nd2O3 appeared to be 3.5wt% and it was observed that the energy absorbed by optical exicitation of the Cr3+ is transfered to the Nd3+. Addition of Cr2O3 tend to improve characteristic of laser oscillation for the laser glass.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1989년도 광학 및 양자전자학 워크샵
• /
• pp.44-50
• /
• 1989

1 tera watt (1012 watt)의 출력을 내는 phosphate glass 레이저를 개발하는 것이 최종목적이며, 1차적으로 완전한 계통도를 설계하였다.

• 한국세라믹학회지
• /
• 제21권4호
• /
• pp.373-381
• /
• 1984

The coloration of the $Nd_2O_3$ contained $R_2O-BaO-SrO-ZrO_2-SiO_2$ glass added the various amount of $CeO_2$ $MnO_2$, $Fe_2O_3$ and $As_2O_3$ alone or together by the irradiation of X-ray irradiation,. The glasses added $CeO_2$ in proportion to amount were more effective on preventing coloration by X-ray irradiation but the addition of $MnO_2$ produced different color according to the amount of addition. The addition of the $Fe_2O_3$, $TiO_2$ and $As_2O_3$ did not give much effects to the transmission changes of $Nd_2O_3$ contained glass by X-ray irradiation but the glass added $CeO_2$ , $Fe_2O_3$, $TiO_2$ together was most effective to prevent coloration and transmisson changes.