• 한국재료학회지
• /
• 제6권12호
• /
• pp.1186-1191
• /
• 1996

CuO의 첨가가 BiNbO4 세라믹스의 마이크로파 유전특성과 소결거동에 미치는 영향에 대하여 연구하였다. CuO의 첨가량이 증가함에 따라 액상의 생성에 의해 소결성이 증가하여 시편의 밀도는 증가하며 유전상수는 소결온도가 증가함에 따라 증가하는 경향을 보였다. Qxfo값은 CuO 첨가량이 0.065wt%이고 소결온도가 94$0^{\circ}C$일 때 최대값을 나타내며 그 이상 CuO 첨가량을 증가하였다. 소결온도 92$0^{\circ}C$-96$0^{\circ}C$, 소결시간 2시간일 때의 고주파 유전특성으로는 유전상수가 43.6, Qxfo값이 13,200 이상, $\tau$f =-14.36ppm/$^{\circ}C$을 얻었다.

• Journal of Welding and Joining
• /
• 제20권3호
• /
• pp.54-59
• /
• 2002

Overlays is a treatment of the surface and near-surface regions of a material to allow the surface to perform functions that are distinct from those frictions demanded far the bulk of the material. Welding, thermal spray, quenching, carburizing and nitration have been used as the surface treatment. Especially, weld overlay is a relatively thick layer of filler metal applied to a carbon or low-alloy steel base metal for the purpose of providing a wear resistant surface. In this study, weld overlay was performed by MAG welding on the base metal(SS400) with filler metal which contain composite powders($Cr_3C_2+Mn+Mo+NbC$) and solid wire(JIS-YGW11). Characteristics of hardness and wear resistance on overlays were analyzed by EDS, EPMA, XRD and microstructures. Carbide formations were $M(Cr, Fe)_7C_3$ and NbC phases. And carbide volume fraction, hardness and specific wear resistance of overlays were increased with increasing powder feed rate and decreasing wire fred rate. Hardness and wear resistance were almost proportioned to carbide volume fraction of overlay.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.549-552
• /
• 2002

$(SrBi_2Nb_2O_9)_{0.5}-(Bi_3TiNbO_9)_{0.5}$ ceramics were fabricated by the mixed-oxide method, and the structural and electrical properties with variation of ball-milling time were investigated. All SBN-BTN specimens showed the typical polycrystalline X-ray diffraction patterns without the presence of the second phase. The SBN-BTN specimen sintered at $1200^{\circ}C$ and ball-milled for 168h showed the average grain size of $16{\mu}m$. The dielectric constant and dielectric loss of the SBN-BTN specimen sintered at $1150^{\circ}C$ and ball-mill for 72h were 225, 0.4% at 1KHz, respectively.

• 한국세라믹학회지
• /
• 제29권9호
• /
• pp.711-718
• /
• 1992

Pb(Fe1/2Nb1/2)O3 was prepared by the molten salt synthesis method using an equimolar mixture of NaCl-KCl. Initial particle size could be controlled by varying the weight ratio of the NaCl-KCl to raw materials from 0.1 to 1.0, and the initial particle size effects on the sintering and dielectric properties of Pb(Fe1/2Nb1/2)O3 were investigated at the sintering temperature range from 90$0^{\circ}C$ to 105$0^{\circ}C$. As the weight ratio of salt increased, the average particle size decreased and the particle size distributions tended to narrow. As the initial particle size decreased, the linear shrinkage and density increased due to the promotion of densification. Dielectric constant increased with decreasing the initial particle size resulting from the increase of density and grain size.

• Advances in materials Research
• /
• 제2권3호
• /
• pp.173-180
• /
• 2013

Lead-free complex perovskite ceramics $NaMeO_3$ ($Me{\equiv}Nb$, Ta) were synthesized using conventional solid state reaction technique and characterized by structural, FTIR and electrical (dielectric and ac conductivity) studies. The crystal symmetry, space group and unit cell dimensions were determined from the experimental results using FullProf software. XRD analysis of the compound indicated the formation of single-phase orthorhombic structure with the space group Pmmm (47). Dielectric studies showed the diffuse phase transition at $394^{\circ}C$ for $NaNbO_3$ and $430^{\circ}C$ for $NaTaO_3$. Ac conductivity in both the compounds follows Jonscher's power law.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2014년도 추계학술대회 논문집
• /
• pp.185-185
• /
• 2014

In this study, we investigated surface characteristics of hydroxyapatite coated surface on nano/micro pore structured Ti-35Ta-xNb alloys. This paper was focus on morphology and corrosion resistance of Anodic oxidation. To prepare the samples, Ti-35Ta-xNb (x= 0, 10 wt. %) alloys were manufactured by arc melting and heat-treated for 12 h at $1050^{\circ}C$ in Ar atmosphere at $0^{\circ}C$ water quenching. Micro-pore structured surface was performed using anodization with a DC power supply at 280 V for 3 min, nanotube formed on Ti-35Ta-xNb alloys was performed using DC power supply at 30 V in 60 min at room temperature. Surface morphology and structure were examined by field-emission scanning electron microscopy, energy-dispersive X-ray spectroscopy and X-ray diffraction.

• The Korean Journal of Ceramics
• /
• 제4권4호
• /
• pp.286-291
• /
• 1998

Dielectric properties of $Pb(Mg_{1/3}Nb_{2/3})O_{3}-PbTiO_{3}$, ceramics prepared by the columbite precursor method have been investigated as a function of the sintering temperature in the range of 1000∼$1250^{\circ}C$. The $Pb(Mg_{1/3}Nb_{2/3})O_{3}-PbTiO_{3}$ ceramics show typical relaxor ferroelectric behavior. As the sintering temperature increased, the dielectric constant increased and the phase transition temperature shifted to lower temperature. The TCK(temperature coefficient of dielectric constant) and VRK (variation rate of dielectric constant) increased with increasing sintering temperature. The $Pb(Mg_{1/3}Nb_{2/3})O_{3}-PbTiO_{3}$ compositions sintered at $1250^{\circ}C$ appear to be suitable for ferroelectric bolometer.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.281-282
• /
• 2007

$Mg_4Nb_2O_9$ (MN) ceramics have been prepared by a sol-gel method. The powder characteristics, phase evolution, and microwave dielectric properties of the MN were investigated in various processing conditions such as sol-gel compositions, calcination, and sintering temperatures. A Qxfo value of 111,717 GHz with a ${\varepsilon}_r$ of 10.59 and a ${\tau}_f$ of $+1.736\;ppm/^{\circ}C$ was obtained after sintering at $1300^{\circ}C$ for 5 h.

• 한국결정성장학회지
• /
• 제7권3호
• /
• pp.377-383
• /
• 1997

이트리아 안정화 지르코니아(Y-TZP)에 5가 산화물$(Ta_2O_5,\;Nb_2O_5)$을 첨가하여 $1500^{\circ}C$온도에서 상압소결한 삼성분계중 quasi-binary system인 $ZrO_2-YTa(Nb)O_4$의 조성영역안에서 상 안정성을 관찰하기 위해 상태도를 작성하였으며, 결정립 크기나 annealing 온도에 상관없이 상 안정성을 유지하는 non-transformable $t-ZrO_2$ solid solution$(NT_{ss}$ )영역을 확인하고 안정화 mechanism을 조사하였다. $NT_{ss}$ 의 상 안정성은 정방정 fergusonite 구조를 갖는 $YTa(Nb)O_4$의 안정화로 상 변태를 억제하여 우수한 상 안정성을 유지하는 것으로 추정되었다. 기계적 특성을 향상시키기 위해 상 변태율이 가장 좋은 transformable-TZP $(T_{ss/})$ 를 에 첨가하여 조사한 결과 mixture의 조성이 $NT_{ss}$ 영역밖의 $NT_{ss}$영역에 위치하여도 상 안정성과 우수한 기계적 특성을 갖는다는 것이 발견되었다.

• 한국재료학회지
• /
• 제9권4호
• /
• pp.378-385
• /
• 1999

핵 연료 피복관 재료로 샤용되고 었는 Zr 합금의 부식특성을 개선하기 위하여 Zn-xSn 2원계 합금과 Zr-0.4Nb-xSn 3원계 합금을 제조하여 부식특성을 평가하였다. 부식 실험은 $360^{\circ}C$ 물 분위기의 mini-autoclave에서 수행하였다. 2원계 합금의 경우 Sn이 0.5, 0.8, 1.5wt.% 첨가된 합금에서는 15일에서 속도천이가 발생한 후 급격한 부식 가속 현상이 나타녔으나, 2.0wt.% 가 첨가된 합금의 경우 80일까지의 부식 실험에서도 천이 현상을 보이지 않는 매우 높은 부식 저항성을 보였다. 3원계 합금에서는 Sn 함량이 증가할수록 부식이 증가하는 경향을 보였다. 이러한 경향은 2원계 합금과 3원계 합금에서 Sn의 고용도 차, 미량 첨가된 Nb의 영향 및 석출물의 특성과 관련이 잇는 것으로 생각된다. 또한 Zr-xSn, Zr-O.4Nb-xSn 합금의 부식은 tetragonal-$ZrO_2$의 분율과 수소 흡수율에 의해서 제어될 수도 있다.