Journal of the Korean Ceramic Society (한국세라믹학회지)

The Korean Ceramic Society (한국세라믹학회)
권호 표지

Initial Particle Size Effects on Sintering and Dielectric Properties of $Pb>(Fe_1/2Nb_1/2)O_3$

초기입자크기가 $Pb>(Fe_1/2Nb_1/2)O_3$의 소결 및 유전성에 미치는 영향

  • 박경봉 (안동대학교 재료공학과) ;
  • 김태희 (안동대학교 재료공학과) ;
  • 윤기현 (연세대학교 세라믹공학과)
  • Published : 1992.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

Pb(Fe1/2Nb1/2)O3 was prepared by the molten salt synthesis method using an equimolar mixture of NaCl-KCl. Initial particle size could be controlled by varying the weight ratio of the NaCl-KCl to raw materials from 0.1 to 1.0, and the initial particle size effects on the sintering and dielectric properties of Pb(Fe1/2Nb1/2)O3 were investigated at the sintering temperature range from 90$0^{\circ}C$ to 105$0^{\circ}C$. As the weight ratio of salt increased, the average particle size decreased and the particle size distributions tended to narrow. As the initial particle size decreased, the linear shrinkage and density increased due to the promotion of densification. Dielectric constant increased with decreasing the initial particle size resulting from the increase of density and grain size.

Keywords

References

  1. Ceramic Processing before Firing I B. Cutler;G.Y. Onoda, Jr.(Ed.);L.L. Hench(Ed.)
  2. Introduction to Ceramics W.D. Kingery;H.K. Bowen;D.R. Uhlmann
  3. Advances in Powder Technology M.F. Yan;Y.Chin(Ed.)
  4. Ceram. Int. v.8 no.3 Formation Mechanism and Ceramic Process of the Ferroelectric Perovskites: $Pb(Mg_{\frac{1}{3}}Nb_{\frac{2}{2}})O_3$ and $Pb(Fe_{\frac{1}{2}}Nb_{\frac{1}{2}})O_3$ M. Lejeune;J.P. Boilot
  5. Ferroelectrics Reaction Mechanisms in the Formation of Perovskite $Pb(Fe_{\frac{1}{2}}Nb_{\frac{1}{2}})O_3$ by Molten Salt Synthesis Method K.B. Park;K.H. Yoon
  6. Mat. Res. Bull. v.18 Dielectric Properties of Pyrochore Lead Magnesium Niobate T.R. Shrout;S.L. Swartz
  7. Mat. Res. Bull. v.14 no.5 Lead Zriconate Titanate Ceramics From Molten Salt Solvent Synthesized Powders R.H. Arendt;J.H. Roslowski;J.W. Szymaszek
  8. Advances in Ceramics v.21 Morphology Control of Electronic Ceramics Powders by Molten Salt Synthesis T. Kimura;T. Yamaguchi
  9. J. Am. Ceram. Soc. v.66 no.10 Characterization and Sintering of Lead of Lead Zirconate-Titanate Powders S.H. Cho;J.V. Biggers
  10. Am. Ceram. Soc. Bull. v.64 no.9 Mechanism of Flux-Aided Reaction in Ferrite Systems Y . Hayashi;T.Kimura;T. Yamaguchi
  11. Ceram. Int. v.9 no.1 Fused Salt Synthesis of $Bi_4Ti_3O_12$ T. Kimura;T. Yamaguchi
  12. Mat. Res. Bull. v.21 Influence of Synthesis Methods of the PTCR Effect in Semiconductive BaTiO₃ K.H. Yoon;K.Y. Oh;S.O. Yoon
  13. Ferroelectrics v.116 Dielectric Properties of $Pb(Mg_{\frac{1}{2}}Nb_{\frac{2}{3}})O_3$ Ceramics Prepared by KCI Molten Salt Synthesis K.H. Yoon;C.K. Kwak;D.H. Kang
  14. J. Kor. Ceram. Soc. v.28 no.1 Dielectric Properties of $Pb(Mg_{\frac{1}{2}}Nb_{\frac{2}{3}})O_3$ with $MnO_2$ Prepared by Molten Salt Synthesis Method K.B. Park;K.H. Yoon
  15. J. Mat. Sci. v.21 Preparation of Acicular NiZn-Ferrite Powders Y. Hayashi;T. Kimura;T. Yamagichi
  16. Ceramic Microstructure '76 G.F. Onoda, Jr.;R.M. Fulath(Ed.);J. Pask(Ed.)
  17. J. Am. Ceram. Soc. v.64 no.8 Sintering of Inhomogeneous Binary Powder Mixtures G.L. Messing;G.Y. Onoda, Jr.
  18. J. Am. Ceram. Soc. v.61 no.7 Inhomogeneity-Packing Density Relations in Binary Powders-Experimental Studies G.L. Messing;G.Y. Onoda, Jr.
  19. Am. Ceram. Soc Bull. v.64 no.9 Reduction of Losses in Lead-Iron Niobate Dielectric Ceramics M.P. Kassarjian;R.E. Newnham;J.V. Biggers
  20. Am. Ceram Soc Bull v.63 no.6 Dielectric Properties in the $Pb(Fe_{\frac{1}{2}}Nb_{\frac{1}{2}})O_3-Pb(Mg_{\frac{1}{2}}Nb_{\frac{2}{3}})O_3$ Solid Solution System T.S. Shrout;S.L. Swartz;M.J. Haun
  21. J. Am. Ceram. Soc. v.67 no.5 Dielectric Properties of Lead-Magnesium Niobate Ceramics S.L. Swartz;T.R. Shrout;W.A. Schulze;L.E. Cross
  22. Ceram. Int. v.8 no.4 Electrical and Mechanical Losses in Ferrolectric Ceramics K. H. Hardtl