• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1472-1474
• /
• 1997

In this study, the $Nb_3Sn$ wire was tried to fabricate by internal tin process to investigate the relationship between the processing parameters in a cold working and the microstructure. The critical current densities of $Nb_3Sn$ wires were evaluated in magnetic fields at 4.2 K. $Nb_3Sn$ compound layer was found to be formed between Nb core and Cu-Sn. The Cu part in the wire transformed to Cu-Sn by the reaction with Sn and the Sn in the Cu-Sn part reacted with Nb.

• 한국재료학회지
• /
• 제7권7호
• /
• pp.623-631
• /
• 1997

본 연구에서는 주조 2상 스테인리스강의열시효에 대한 시효온도, 시효시간 및 Nb함유량의 영향을 관찰하기 위해 기계적 성질 및 조직을 조사하였으며 Nb을 함유한 주조 2상 스테인리스강의 파괴기구를 규명하기 위해 SEM에 의한 파단면 관찰과 WDS성분분석을 통해 파괴기구의 특성을 고찰하였다. 시효온도와 시효시간이 증가함에 따라 페라니트으 미소경도가 증가하였으며 항복강도의 경우 시효온도와 시효시간에는 영향을 받지 않았으나 Nb을 함유한 재료들이 Nb을 함유치 않은 재료들에 비해 다소 낮은 항복강도 값을 보였다. 충격흡수에너지 값은 시효시간 및 시효온도의 증가에 따라 시험된 모든 재료에서 저하되었는데 0.4% Nb을 함유하는 경우 Nb을 약간 함유하거나 함유치 않은 재료들에 비해 시효시간에 따라 급격한 감소 경향을 보였다. 파단면 관찰결과 페라이트 기지 또는 페라이트/오스테나이트 상경계에서 석출된 VbC를 비롯한 탄화물들이 취성저항성을 낮추는데 크게 기여했음을 알 수 있었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.333-336
• /
• 2005

The reduction behavior of $Nb_2O_5$ in aluminum containing self-reducing briquettes(SRNB) was investigated. The time required for slag/metal equilibrium was estimated as about 20 minutes from the addition of SRNB on to the surface of molten steel. The maximum yield of Nb was expected with the slag composition of $60\%CaO-40\%Al_2O_3$. When $CaCO_3$ was used as a flux, the oxidation loss of Al by $CO_2$ should be compensated, and the chemical equivalent ratio of Al to $Nb_2O_5$ of about 1.43 was required to maximize the yield of Nb.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.256-259
• /
• 1996

$(Sr_{1-x}{\cdot}Ca_x)TiO_3+yNb_2O_5$($0.05{\leq}x{\leq}0.2$, 0.004$1350[^{\circ}C]$ in a reducing atmosphere($N_2$ gas). Dielectric propertries were investigated with contents of $Nb_2O_5$. The grain size and dielectric constant increase with increase $Nb_2O_5$, but decrease in $Nb_2O_5$ exceed($Nb_2O_5=0.6[mol%]$). Also, the temperature characteristics of the dielectric loss factor exhibited a stable value within 0.5[%]. The capacitance characteristics appeals a stab]e value in ${\pm}10[%]$.

• 열처리공학회지
• /
• 제14권1호
• /
• pp.1-7
• /
• 2001

A method to simultaneously synthesize and consolidate the silicide $NiSi_2$ and the composite $NiSi_2$-20vol.%Nb from powders of Ni, Si, and Nb was investigated. Combustion synthesis was carried out under the combined effect of an electric field and mechanical pressure. The final density of the products increased nearly linearly with the applied pressure. Highly dense $NiSi_2$ and $NiSi_2$-20vol.%Nb with relative densities of up to 97% were produced under the simultaneous application of a 60MPa pressure and a 3000A current on the reactant powders. The respective Vickers microhardness values for these materials were 6.0 and 5.8 GPa. From indentation crack measurements, the fracture toughness values for $NiSi_2$ and $NiSi_2$-20vol.%Nb were calculated to be 3.3 and 4.7 $MPa{\cdot}m^{1/2}$, respectively.

• 한국재료학회지
• /
• 제2권1호
• /
• pp.52-57
• /
• 1992

용응인상법에 의해 융성시킨 $LiNbO_3$ 단결정의 거시적 결함은 단결정 육성인자인 성장속도, 온도구배 및 결정회전속도에 강하게 영향을 받았다. Cell 구조가 형성되지 않고 결정의 직경제어가 용이하며 결정성장 후 냉각시 에도 crack이 발생되지 않는 1" 직경의 $LiNbO_3$ 단결정의 성장조건은 온도기울기 $70~100^{circ}C/cm$, 성장속도 5~10 mm/hr, 결정회전속도 40 rpm 이었다. 이었다.

• 한국결정성장학회지
• /
• 제2권1호
• /
• pp.30-36
• /
• 1992

$LiNbO_3$단결정의 조성비 변화에 따른 탄성표면파 특성을 축정하기 위해 47-50 $Li_2O$ mol% 조성의 $LiNbO_3$단결정을 성장시켜 $128^{\circ}$Y cut wafer를 제조하였다. 제작된 wafer 위에 사진식각법을 이용하여 지연선(Delay line)을 형성시켰다. Pulse-echo overlap mehtod로 지연시간을 측정하여, 탄성표면파 속도$(V_s)$, 전기기계결합계수$(K_s^2)$ 및 $-50^{\circ}C~100^{\circ}C$ 온도 범위에서 지연시간 온도계수(TCD)의 조성비에 대한 의존성을 조사하였다.

• The Korean Journal of Ceramics
• /
• 제5권4호
• /
• pp.371-374
• /
• 1999

Y2O3 and Nb2O5 co-doped tetragonal zirconia polycrystals((Y, Nb)-TZP) containing 10 to 30 vol% $Al_2O_3$ were prepared and hydrothermal stability of the composites was evaluated after aging for 5 h at the temperature range of $150^{\circ}C$ $250^{\circ}C$ under 4 MPa $H_2O$ vapor pressure in an autoclave. The (Y, Nb)-TZP/Al2O3 composites showed excellent phase stability under the hydrothermal conditions, as compared with the 3Y-TZP/$Al_2O_3$ composites, due to the combined effects of the Y-Nb ordering in the $t-ZrO_2$ lattice, the reduction of oxygen vacancy concentration, and the $Al_2O_3$ addition. The strength and fracture toughness of the (Y, Nb)-TZP/$Al_2O_3$ composite, containing 20 vol% of 2.8 $Al_2O_3$ particles, were 700 MPa and 8.1 MP.$am^{1/2}$, respectively.

• 한국전기전자재료학회논문지
• /
• 제22권3호
• /
• pp.205-209
• /
• 2009

In this study, in order to develop the composition ceramics for lead-free ultrasonic motor, (1-x-0.09)$NaNbO_{3-x}BaTiO_3-0,09LiNbO_3$ ceramics were fabricated using a conventional mixed oxide process and their piezoelectric and dielectric characteristics were investigated according to the $BaTiO_3$ substitution. All the specimens showed orthorhombic phase structure without secondary phase, $BaTiO_3$ substitution enhanced density, dielectric constant(${\epsilon}_r$) and electromechanical coupling factor($k_p$), However, mechanical quality factor was deteriorated. Curie temperature of specimens was observed as about $380^{\circ}C$. At the $BaTiO_3$ substitution of 4 mol%, density, electromechanical coupling factor($k_p$), dielectric constant(${\epsilon}_r$) and piezoelectric constant($d_{33}$) of specimen showed the optimum value of $4.493g/cm^3$, 0.236, 175, 70 pC/N, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.476-479
• /
• 2001

The microwave dielectric properties of $[(Pb_{1-x}Ba_{x})_{1/2}La_{1/2}](Mg_{1/2}Nb_{1/2})O_{3}$ ceramics were investigated. When $[(Pb_{0.9}Ba_{0.1})_{1/2}La_{1/2}](Mg_{1/2}Nb_{1/2})O_{3}$ ceramics were sintered at $1250^{\circ}C$ and $1350^{\circ}C$ for 2hr, the microwave dielectric properties were obtained $\varepsilon_{r}=64\sim80$, $Q{\times}f=11,800\sim18,000$. As a result, $[(Pb_{0.9}Ba_{0.1})_{1/2}La_{1/2}](Mg_{1/2}Nb_{1/2})O_{3}$ having $\varepsilon_{r}=80$, $Q{\times}f=11,800$ (at 4 GHz) was developed.