Hydrothermal Stability of (Y, Nb)-TZP/$Al_2O_3$ Composites

  • Lee, Deuk-Yong (Department of Metallurgical and Materials Engineering) ;
  • Kim, Dae-Joon (Division of Ceramics, Korea Institute of Science and Technology) ;
  • Lee, Seung-Jae (Department of PWR Fuel Development, Korea Nuclear Fuel Co., Let.)
  • 발행 : 1999.12.01

초록

Y2O3 and Nb2O5 co-doped tetragonal zirconia polycrystals((Y, Nb)-TZP) containing 10 to 30 vol% $Al_2O_3$ were prepared and hydrothermal stability of the composites was evaluated after aging for 5 h at the temperature range of $150^{\circ}C$ $250^{\circ}C$ under 4 MPa $H_2O$ vapor pressure in an autoclave. The (Y, Nb)-TZP/Al2O3 composites showed excellent phase stability under the hydrothermal conditions, as compared with the 3Y-TZP/$Al_2O_3$ composites, due to the combined effects of the Y-Nb ordering in the $t-ZrO_2$ lattice, the reduction of oxygen vacancy concentration, and the $Al_2O_3$ addition. The strength and fracture toughness of the (Y, Nb)-TZP/$Al_2O_3$ composite, containing 20 vol% of 2.8 $Al_2O_3$ particles, were 700 MPa and 8.1 MP.$am^{1/2}$, respectively.

키워드

참고문헌

  1. J. Am. Ceram. Soc. v.68 Transformation of Yttria-Doped Tetragonal ZrO₂ Polycrystals by Annealing in Water T. Sato;M. Shimada
  2. J. Am. Ceram. Soc. v.69 Degradation During Aging of Transformation-Tpughened $ZrO_2-Y_2O_3$ Materials at $250^{\circ}C$ F. F. Lange;G. L. Dunlop;B. I. Davis
  3. Am. Ceram. Soc. Bull. v.67 no.12 Phase Stability of Zirconia M. Yoshimura
  4. J. Eur. Ceram. Soc. v.15 Environmental Degradation of Zirconia Ceramics S. Lawson
  5. J. Eur. Ceram. Soc. v.15 Moisture Sensitive Degradation in $TiO_2-Y_2O_3-ZrO_2$ A. E. Hughes;H. St John;P. Kountouros;H. Schubert
  6. Soid State Ionics v.80 Phase Transformations of $Y_2O_3\;and\;Nb_2O_5$ doped Tetragonal Zirconia during Low Temperature Aging in Air D.-J. Kim;H.-J. Jung;D.-H. Cho
  7. J. Eur. Ceram. Soc. v.17 Influence of Aging Enviroment on Low-Temperature Degradation of Tetragonal Zirconia Alloys D.-J. Kim
  8. J. Am. Ceram. Soc. v.81 no.10 Fracture Toughness, Ionic Conductivity and Low Temperature Stabilty of Tetragonal Zirconia Co-doped with $Y_2O_3\;and\;Nb_2O_5$ D.-J. Kim;H.-J. Jung;J.-W. Jang;H.-L. Lee
  9. J. Am. Ceram. Soc. v.74 no.6 Subeutectoid Degradation of Yttria-Stabilized Tetragonal Zirconia Polycrystal and Ceria-Doped Yttria-Stabilized Tetragonal Zirconia Polycrystal Ceramics M. T. Hernandez;J. R. Jurado;P. Duran;J. L. G. Fierro
  10. J. Mater. Sci. v.30 The Effect of Ceria Co-Doping on Chemical Stability and Fracture Toughness of Y-TZP M. M. R. Boutz;A. J. A. Winnubst;B. Van Langerak;R. J. M. Olde Scholtenhuis;K. Kreuwel;A. J. Burggraaf
  11. J. Eur. Ceram. Soc. v.18 Effects of Grain Size and Ceria Addition on Ageing Behaviour and Tribological Properties of Y-TZP Ceramics S. R. Jansen;A. J. A. Winnubst;Y. J. He;H. Verweij;P. G. Th. van der Varst;;G.de With
  12. J. Ceram. Soc. Jpn. v.99 no.2 Fabrication and Properties of (Y,Ce)-$TZP/Al_2O_3\;and\;Y-TZP/Al_2O_3$ Composites from Fine Powders Prepared by a Hydrolysis Technique M. Hirano;H. Inada
  13. Ceramic Transaction v.12 H. Hofmann;B. Michel;L. J. Gauckler;J. Allemann;G.L. Messing(ed.);S. Hirano(ed.);H. Hausner(ed.)
  14. J. Mater. Sci. Lett. v.17 no.3 Low-Temperature Phase Stability and Mechanical Properties of $Y_2O_3\;and\;Nb_2O_5$ Co-doped Tetragonal Zirconia Polycrystal Ceramics D. Y. Lee;D.-J. Kim;D.-H. Cho
  15. Mater. Trans., JIM v.39 no.2 Mechanical Properties of Hot-Pressed TZP Ceramics Doped with $Y_2O_3\;and\;Nb_2O_5$ Co-doped Tetragonal Zirconia Polycrystal Ceramics D. Y. Lee;D.-J. Kim;K-S. Cho
  16. J. Am. Ceram. Soc. v.77 no.5 Effect on Dopant on Zirconia Stabilization-An X-ray Absorption Study: Ⅲ, Charge-Compensating Dopants P. Li;I.-W. Chen;J. E. Penner-Hahn
  17. J. Am. Ceram. Soc. v.74 no.20 Twinning in YNbO₄ C. Quinn;R. Wursirika
  18. J. Eur. Ceram. Soc. v.18 Effect of Niobia on the Defect Structure of Yttria-stabilized Zirconia X. Guo;Z. Wang
  19. ASTM Annual Book of Standards v.15.02 Biaxial Flexure Strength (Modulus of Rupture) of Ceramic Substrate ASTM Standard F394-78
  20. J. Am. Ceram. Soc. v.64 no.9 A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: Ⅰ, Direct Crack Measurements G. R. Anstis;P. Chantikul;B. R. Lawn;D. B. Marshall
  21. Comm. Am. Ceram. Soc. v.65 A Simple Method for Determining Elastic-Modulus-Hardness Ratios using Knoop Indentation Measurements D. B. Marshall;T. Noma;A. G. Evans
  22. J. Am. Ceram. Soc. R-Curve Behavior and Hydrothermal Stability of (Y,Nb)-TZP/$Al_2O_3$ Composites D. Y. Lee;D.-J. Kim;B.-Y. Kim
  23. J. Am. Ceram. Soc. v.67 no.6 Phase Analysis on Zirconia Systems R. C. Garvie;P. S. Nicholson
  24. J. Mater. Sci. v.28 Processing and Properties of Y-TZP/$Al_2O_3$ Composites D. D. Ypadhyaya;P. Y. Lalvi;G. K. Dey
  25. J. Mater. Sci. v.28 Mechanical Properties of $Al_2O_3$ Particle-Y-TZP Matrix Composite and its Toughening Mechanism J. L. Shi;B. S. Li;T. S. Yen
  26. Fracture of Brittle Solids(2nd Ed.) B. Lawn
  27. J. Am. Ceram. Soc. v.78 no.4 Fracture Toughness of $Al_2O_3$-Particle-Dispersed $Y_2O_3$-Partially Stabilized Zirconia J.-F. Li;R. Watanabe
  28. J. Kor. Ceram. Soc. v.34 no.12 Influence of Applied Electric Filed on Low Temperature Degradation of Y-TZP J.-W. Jang;H.-L. Lee;D.-J. Kim;N-S. Oh;D. Y. Lee