• Journal of the Mineralogical Society of Korea
• /
• v.15 no.1
• /
• pp.59-68
• /
• 2002

Chemical analyses and Rietveld structural refinement with powder X-ray diffraction data were done for Nb-rich perovskite, named latrappite ($Ca_2NbFe^{3+}O_6$)from the Oka, Quebec, Canada. Latrappite is shown to be a member of a continuous solid solution of $CaTiO_3-NaNbO_3-Ca_2NbFe^{3+}O_6$ and approximately $(Ca_{1.5}Na_{0.4})\;(Nb_{0.1}Ti_{0.6}Fe_{0.4})O_6$ in composition. The crystal structure of latrappite, determined by Rietveld refinement, is similar to that of perovskite ($CaTiO_3$). It differs in that replacement of Ti by Nb and $Fe^{3+}$ results in greater distortion and tilting of the $TiO_6$ framework octahedra relative to $CaTiO_3$. Revised unit-cell parameters of latrappite are a=5.4474(4), b=5.5264(4), c=7.7519(5) ${\AA},\;V=233.4(3){\AA}^3$ space group Pbnm.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.2
• /
• pp.152-164
• /
• 1995

$xPb(Fe_{1/2}Nb_{1/2})O_3 - (1 - x)Pb(Mg_{1/3}Nb_{2/3})O_3$ powders were synthesized by the molten salt synthesis method using the NaC!- KCI flux with 1 : 1 molar ratio, and their powders and dielectric properties were investigated. The synthesized powders showed less agglomerated shape with the average particle size of less than $2 \mu\textrm{m}$. The composition $x0.3Pb(Fe_{1/2}Nb_{1/2})O_3-0.7Pb(Mg_{1/3}Nb_{2/3})O_3$ could be sintered at $1000{\times}C$ and its dielectric constnat was over 11, 000.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.7
• /
• pp.1208-1212
• /
• 2008

In this study, both structural and microwave dielectric properties of the $Ba_5B_4O_{15}$ (B=Ta, Nb) cation-deficient perovskite ceramics with sintering temperature were investigated. All samples of the $Ba_5B_4O_{15}$ (B=Ta, Nb) ceramics were prepared by the conventional mixed oxide method and sintered at $1325^{\circ}C{\sim}1575^{\circ}C$. The bulk density and dielectric constant of the $Ba_5Ta_4O_{15}$ ceramics were increased continuously with increasing of sintering temperature. The quality factor of the $Ba_5Ta_4O_{15}$ ceramics was increased in as the sintering temperature increases from $1375^{\circ}C{\sim}1475^{\circ}C$ but decreased at the temperatures above $1475^{\circ}C$. And the bulk density, dielectric constant and quality factor of the $Ba_5Nb_4O_{15}$ ceramics were increased in as the sintering temperature increases from $1325^{\circ}CP{\sim}1400^{\circ}C$ but decreased at the temperatures above $1400^{\circ}C$. In the case of the $Ba_5Ta_4O_{15}$ sintered at $1475^{\circ}C$ and $Ba_5Nb_4O_{15}$ ceramics sintered at $1400^{\circ}C$, the dielectric constant, quality factor, and temperature coefficient of the resonant frequency (TCRF) were 25.15, 53,105 GHz, -3.06 $ppm/^{\circ}C$ and 39.55, 28,052 GHz, +5.7 ppm/$^{\circ}C$, respectively.

• Journal of Sensor Science and Technology
• /
• v.23 no.2
• /
• pp.105-109
• /
• 2014

Structure and electrical properties of $0.85NaNbO_3-0.15LiNbO_3$ ($(Li_{0.15}Na_{0.85})NbO_3$) ceramics were investigated as a function of sintering temperature. $(Li_{0.15}Na_{0.85})NbO_3$ ceramics were prepared by conventional solid state processing. A main phase of the orthorhombic perovskite structure and secondary phase of $LiNbO_3$ were confirmed for all sintered specimens. Dense $(Li_{0.15}Na_{0.85})NbO_3$ ceramics were obtained at sintering temperature above $1050^{\circ}C$. With increasing sintering temperature, the electromechanical coupling factor ($k_p$), piezoelectric constant ($d_{33}$) and relative dielectric constant (${\varepsilon}_r$) of the sintered specimens increased, while the mechanical quality factor ($Q_m$) decreased. These results are due to the increase of grain size and crystallite size of orthorhombic perovskite structure. Based on the temperature dependence of ${\varepsilon}_r$, stable piezoelectric properties were expected because no phase transition found up to $300^{\circ}C$. Typically, kp of 18%, $d_{33}$ of 34.7 pC/N, ${\varepsilon}_r$ of 135, and $Q_m$ of 62.8 were obtained for the specimens sintered at $1200^{\circ}C$ for 5 h.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.245-245
• /
• 2007

본 연구는 $Bi_2O_3$, ZnO 및 $Nb_2O_5$로 이루어진 두 가지의 $Bi_2(Zn_{1/3}Nb_{2/3})_2O_7$와 $(Bi_{1.5}Zn_{0.5})(Zn_{0.5}Nb_{1.5})O_7$ pyrochlore를 제조한 후, ZBS 및 BZBS 유리를 각각 첨가하여 저온 소결 및 마이크로파 유전 특성을 고찰하였다. 두 가지의 pyrochlore에 대하여 하소 온도에 따른 상 합성 유무를 고찰한 결과 $900^{\circ}C$에서 단일 상을 갖는 pyrochlore를 제조할 수 있었다. 두 가지의 pyrochlore에 ZnO-rich ZBS 유리와 $Bi_2O_3$-rich BZBS 유리를 3, 5 wt%로 첨가한 후 $800{\sim}950^{\circ}C$에서 소결한 결과 ZBS 및 BZBS 유리를 5wt%를 첨가하였을 때 $900^{\circ}C$에서 소결이 가능하였다. 또한 마이크로파 유전 특성을 고찰한 결과, $(Bi_{1.5}Zn_{0.5})(Zn_{0.5}Nb_{1.5})O_7$의 pyrochlore는 고주파에서 유전 특성 측정이 되지 않았다. $Bi_2(Zn_{1/3}Nb_{2/3})_2O_7$의 pyrochlore의 경우 5 wt% ZBS 및 BZBS 유리를 첨가하여 $900^{\circ}C$에서 소결한 시편의 마이크로파 유전 특성은 ${\varepsilon}_r$= 62.8~68.3, $Q{\times}f$ value= 3,500~2,700 GHz을 나타내었다.

• Korean Journal of Materials Research
• /
• v.2 no.1
• /
• pp.65-75
• /
• 1992

0.4wt%C steel added with V and/or Nb were forged and followed by air cooling. The structure-property relationships were examined and multiple regression analysis was conducted to quantify the magnitudes of effects of microalloying elements on the properties of the steels. All material's tensile strength are greater than $70kg/\textrm{mm}^2$, so they are equal to or superior to Q/T material's(S45C). Their impact energies are less than 40J, so they are 50% of Q/T material's. Increasing the content of V from 0.10 to 0.15 wt% had brought improvement in UTS about 20% but with some sacrifice of impact energy. These were the results from the precipitation strengthening by fine dispersion of VC in ferrite, increment of pearlite volume fraction and decrement of pearlite interlamellar spacings. However, increasing the content of Nb from 0.05 to 0.l0wt % slightly improved UTS and impact energy. NbC precipitates were more effective in suppression of austenite grain coarsening than VC precipitates. Combined additions of V+Nb were more effective to bring impact toughness than sole addition. Optimum combination of strength and toughness was accomplished wish 0.4C-1. 19Mn-0.05S-0.12V-0.07Nb steel.

• Membrane Journal
• /
• v.25 no.5
• /
• pp.415-421
• /
• 2015

$SrCo_{0.8}Fe_{0.1}Nb_{0.1}O_{3-{\delta}}$ oxide was synthesized by solid state reaction method. Dense ceramic membrane was prepared using as-prepared powder by pressing and sintering at $1250^{\circ}C$. XRD result of membrane showed single perovskite structure. The oxygen permeability were measured under 0.21 atm of oxygen partial pressure ($P_{O_2}$) and between 800 and $950^{\circ}C$. The oxygen permeation flux of $SrCo_{0.8}Fe_{0.1}Nb_{0.1}O_{3-{\delta}}$ membrane was increased with the increasing temperature. The maximum oxygen permeation flux was $1.839mL/min{\cdot}cm^2$ at $950^{\circ}C$. Long period permeability experiment was carried out to confirm the phase stability and $CO_2$-tolerance of membrane containing Nb in the condition of air with $CO_2$ (500 ppm) as feed stream at $900^{\circ}C$. The phase stability and $CO_2$-tolerance of $SrCo_{0.8}Fe_{0.1}Nb_{0.1}O_{3-{\delta}}$ were investigated by XRD and TG analysis. The result of $SrCo_{0.8}Fe_{0.1}Nb_{0.1}O_{3-{\delta}}$ which exposed carbon dioxide for 100 hours indicated 8wt% of $SrCO_3$. But it was known that the level of $SrCO_3$ production dose not have a significant effect on oxygen permeability.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.217-218
• /
• 2006

More and more applications or demands for machine parts etc are expected for AISI 440C (hereinafter referred to as "440C") Stainless Steel because of its characteristic features, i.e. high-strength as well as high-corrosion resistance. This research has enabled us to obtain sintered products with good quality even under a wide range of temperature by utilizing the pinning effect of NbC, improving the relevant sintering feature of 440C Stainless Steel in the MIM method.

• Progress in Superconductivity and Cryogenics
• /
• v.4 no.1
• /
• pp.4-7
• /
• 2002

Samples of $Nb/Al-AlO_x/Nb$ tunnel junction with the size of $50 ${\mu}{\textrm}{m}$ {\times} 50 ${\mu}{\textrm}{m}$$ were fabricated by using self-aligning and reactive ion etching technique In the high quality samples, the $V_m$ value (the product of the critical current and subgap resistance measured at 2 mV) was 34 mV at the critical current density of $J_c: 500 A/cm^2 and the V_g$ value (the gap voltage) was 2.8 mV. For the higher $J_c$ sample, voltage fluctuation at the gap voltage was observed. The $V_m and J_c$ values for this sample were 8 mV and 900 A/cm$^2$, respectively. Also, the relationship between critical current density $J_c$ and specific normal conductance $G_s$ of the junctions with $J_c$ in the range of 28 A/cm$^2$~940 A/cm$^2$was investigated.

• Applied Science and Convergence Technology
• /
• v.24 no.6
• /
• pp.224-227
• /
• 2015

Ferroelectric $Pb_2(Sc,Nb)O_6$ were prepared under two different sintering conditions using the oxide mixing method and the electrical properties were measured. The sintering conditions were $1350^{\circ}C$ for 25 minutes and $1400^{\circ}C$ for 20 minutes. EDX spectroscopy and XRD were used to determine the crystalline characteristic of the $Pb_2(Sc,Nb)O_6$ compositions Pyrochlore phase showed about 2% in all $Pb_2(Sc,Nb)O_6$ specimens. It expands the growth of crystals in samples sintered at $1400^{\circ}C$ than $1350^{\circ}C$, but all samples were the optimal crystallization. The temperature and frequency dependence of the complex dielectric constant and admittance were measured to analyze the electrical properties. The high dielectric constant of the specimens reflects the good stoichiometry and crystallization. The maximum value of the dielectric constant in the two specimens treated with sintering at $1350^{\circ}C$ and $1400^{\circ}C$ were more than 27,000, and the dielectric loss at room temperature is smaller than 0.05. The maximum dielectric constant decreased with increasing frequency, the transition temperature also increased in $Pb_2(Sc,Nb)O_6$ compositions. The admittance and susceptance values reach a peak at all temperatures, and the magnitude of the peak increases with increasing measuring temperature. Strong frequency dependent of maximum admittance, susceptance, dielectric constant and dielectric loss were observed.