• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.694-695
• /
• 2006

As a candidate for lead-free piezoelectric materials, dense $95(Na_{0.5}K_{0.5})NbO_3-5LiTaO_3$ (NKN-5LT) ceramics were developed by conventional sintering process. Sintering temperature was lowered by adding $Li_2O$ as a sintering aid. The electrical properties of NKN-5LT ceramics were investigated as a function of $Li_2O$ concentration. At the addition of 1 mol% $Li_2O$, electromechanical coupling factor $(k_P)$ and piezoelectric coefficient $(d_{33})$ of NKN-5LT ceramics were found to reach the highest values of 0.37 and 250 pC/N, respectively.

• 한국식품과학회지
• /
• 제43권5호
• /
• pp.597-602
• /
• 2011

약콩을 재료로 가장 높은 이소플라본 함량을 갖는 발아조건을 찾고(본 연구에서는 48시간), 발아시킨 약콩을 열처리 하지 않은 군과 20분 끓이기 처리를 한 군으로 나누어 밀가루양의 각 15%, 20%를 대체하여 면을 제조하고 그 특성을 평가하였다. 대조군은 수분흡수량이나 부피증가율 및 조리 후 당용출이 가장 높게 측정되었으나 발아콩가루 첨가량이 많을수록 수치가 낮아지는 결과를 보았다. 특히 끓인 발아콩가루 15% 첨가군은 당용출이 가장 낮게 측정되었다. 조직감 특성에 있어서, 대조군은 가장 높은 견고성을 나타내었으며 조리 후 1시간 까지 크게 증가함을 보였다. 발아콩 분말의 함량이 증가할수록 경도가 감소하는 경향을 보였으며, 끓인 콩의 경우 동일비율의 열처리 하지 않은 콩에 비해 상대적으로 견고성의 감소폭이 크게 나타났다. 특히 열처리한 발아콩가루를 15% 수준으로 첨가했을 때 경도는 대조군보다 낮았으나, 탄력성은 대조군보다 높게, 점착성은 대조군보다 낮게 측정되어 바람직한 제면의 특성을 보였다. 관능검사 결과 15% 발아콩가루 첨가면은 외관상에서 높은 점수를 얻었으나, 20% 첨가 면은 색이 짙고 열처리하지 않은 콩가루 첨가면은 콩비린내가 감지되었기 때문에 appearance 와 flavor면에서 낮게 측정되었다. 건강에 관한 관심이 높아지면서 밀가루만으로 만든 국수보다는 발아콩가루를 넣은 면이 외관, 조직감을 비롯하여 전체적인 선호도에서도 높은 점수를 얻었으며, 특히 열처리한 콩가루 15% 첨가면이 가장 높은 선호도를 보였다.

• 한국전기전자재료학회논문지
• /
• 제29권12호
• /
• pp.781-785
• /
• 2016

With trend of the miniaturization and the high-functionalizing of mobile communication system, low-loss microwave dielectric materials are widely used for high frequency communication components. These dielectric materials should be co-sintered with highly electric-conducting metal such as silver or copper for high-frequency and thick film process application. Sintering temperature of $Ca(Li_{1/3}Nd_{2/3})_{0.2}Ti_{0.8}]O_{3-{\delta}}$, which has excellent dielectric properties such as ${\varepsilon}_r$ above 40, quality factor ($Q{\cdot}f_0$) above 16,000 GHz, and TCF (temperature coefficient of resonant frequency) of $-20{\sim}-10ppm/^{\circ}C$, is reported as high as $1,175^{\circ}C$, so it could not be co-sintered with silver or copper. Therefore in this study, low-temperature melting glasses of Zn-B-O and Zn-B-Si-O systems were added to $Ca[(Li_{1/3}Nb_{2/3})_{0.8}Ti_{0.2}]O_{3-{\delta}}$ to lower its sintering temperature under $900^{\circ}C$ without losing excellency of dielectric properties. With 15 weight % of Zn-B-Si-O glass and sintered at $875^{\circ}C$, specimen showed density of $4.11g/cm^3$, ${\varepsilon}_r$ of 40.1, $Q{\cdot}f_0$ of 4,869 GHz, and TCF of $-5.9ppm/^{\circ}C$. With 15 weight % of Zn-B-O glass and sintered at $875^{\circ}C$, specimen showed density of $4.14g/cm^3$, ${\varepsilon}_r$ of 40.4, $Q{\cdot}f_0$ of 7,059 GHz, and TCF of $-0.92ppm/^{\circ}C$.

• 생명과학회지
• /
• 제16권7호
• /
• pp.1169-1173
• /
• 2006

본 연구는 갈파래(Ulva lactuca) 추출분획의 암세포주에 대한 세포독성 및 면역활성 효과를 조사하였다. 갈파래의 에탄올 추출물로부터 분획물의 제조는 hexane, ethyl ether, methanol, butanol, $H_2O$의 용매를 이용하여 행하였다. 인간 백혈암세포주(U937), 생쥐 신경아종세포주(NB41A3), 인체간암세포주(HepG2),큰지 신경교세포주(C6) 등에 대한 갈파래 분획물의 세포독성을 측정하였다. 갈파래의 Ethyl ether 층은 4종류의 세포 모두에서 가장 높은 세포독성을 나타냈다. 또한 수층 역시 비교적 높은 세포독성을 나타냈다. 4종류의 세포 모두에서 농도의존적 경향을 나타냈다. 갈파래 분획물의 큰쥐 대식세포주(RAW 264.7)에 대한 면역활성 효과도 조사하였다. 갈파래 추출물의 5가지 분획물 모두에서 농도의존적으로 NO 생산을 활성화시켰다. 이러한 결과들로 잔파래가 항암 덴 면역활성을 나타내는 천연 소재개발에 있어 유용한 후보가 될 수 있을 것으로 사료된다.

• 한국항행학회논문지
• /
• 제22권2호
• /
• pp.76-83
• /
• 2018

정부는 2016년 유실어구에 의한 피해를 최소화하기 위해 전자어구실명제 실행계획을 발표하였다. 어구의 과다사용 및 폐어구 저감을 위해 어구의 종류 및 위치, 사용자의 실명을 포함한 정보를 IoT 기반의 통신을 이용하여 어선 및 관제센터에 효율적으로 전송할 수 있는 기술이 필요하다. 이를 위해서는 육상의 기지국에서 식별가능한 다수 부이의 위치정보를 확인할 수 있어야한다. 본 논문에서는 이러한 해상 IoT 통신 시스템을 서비스하기 위해서 육상기지국과 해상에 존재하는 타겟들과의 링크버짓을 계산하여 서비스가 가능한 거리를 산출한다. 어구 모니터링 시스템 구축을 위한 해상 IoT 무선망 설계를 위해 1.8 GHz 주파수 대역을 사용하는 NB-IoT와 900 MHz 주파수 대역을 사용하는 LoRa 서비스에 대해 해상에서의 무선 서비스 최적화를 위한 링크 버짓을 계산한다. 또한, 육상기지국- 부이간 링크버짓과 육상기지국-어선간 링크버짓을 산출하여 그 결과를 분석한다.

• 한국주조공학회지
• /
• 제20권5호
• /
• pp.336-343
• /
• 2000

The effects of casting variables and alloying elements on the fluidity of thin wall cast stainless steels were investigated. Melts were poured into the sand molds to produce thin wall test castings. The length of it was 245 mm and the thickness varied at the interval of 0.5 in the range of 1.6 to 2.6 mm. For the same casting condition, the fluidities of austenitic stainless steel, ferritic, precipitation hardenable and martensite ones were better in the order. The higher the pouring temperature, the shorter the pouring rate and the better the fluidity were. The fluidity was increased with the addition of Cr and decreased with W and Nb.

• 한국재료학회지
• /
• 제7권2호
• /
• pp.162-170
• /
• 1997

This study has evaluated the dissimialr weldability of Incoloy 825 Ni base alloy with a mild steel(SS41). Further a compatibility study of wrveral Ni base filler metals with the dissimilar joint between the two alloys was also included. The dissimilar weldability of Incoloy 825 with mild steel is strongly dependent upon the type of the filler metal used. Among the filler metals, ENiCrFe which has a chemical comosition similar to that of Incoloy 825 was found to be most compatible to the joint. In addition, a filler metal which showed a good cracing resistance in one dissimiar alloy combination was not necessarily graranteed to other combination. Microstructural examination with SEM, TEM and Auger revealed that the solidification cracking resestance of the dissimilar joint. between Incoloy 835 and SS41 was closely with the Ti+Nb content and with the content of a low melting eutectic phase of Laves relatibve to that of MC type phase.

• KSBB Journal
• /
• 제13권5호
• /
• pp.477-482
• /
• 1998

A biosensor with PZT piezoelectric ceramic crystal was developed for the detection of formaldehyde gas. Poled PZT piezoelectric ceramic disk was made from ZrO2, TiO2 and Nb2O5, together with the addition of PbO and polyvinyl alcohol, through various processes of mixing, calcination drying, crushing, forming, sintering, polishing, ion coating and poling. Oscillator circuit of sensor was made of operational amplifier(AD811AN). Formaldehyde dehydrogenase was immobilized onto a piezoelectic ceramic crystal, together with the cofactors, reduced glutathione and nicotinamide adenine dinucleotide. The effect of flow rate on the sensitivity was determined by varing the flow rate of carrier gas from 24.7mL/min to 111.7mL/min through detector cell. The results indicated that as the flow rate was increased, the recovery rate was increased. And a significant increase in the sensitivity was observed in enhanced flow rate of carrier gas. Frequency difference(ΔF) of immobilized PZT piezoelectic disk increased proportionally to the concentration gas and reproduced to repeated exposures of formaldehyde gas(28ppm, Δ68Hz).

• 한국표면공학회지
• /
• 제34권3호
• /
• pp.247-257
• /
• 2001

In an effort to improve the dent resistance of exterior body panels at a reduced steel thickness, the bake hardenable steels added Ti or Nb with tensile strength of 35Kgf/$\textrm{mm}^2$ were investigated. The bake hardenability increased with the annealing temperature and solute carbon content. Bake hardening of 3 to 5Kgf/$\textrm{mm}^2$ was obtained in steels with a controlled solute carbon concentration range from 6 to 10ppm. The galvannealing temperature and time had little influence on the bake hardenability. The Fe-Zn alloying reaction of 35Kgf/$\textrm{mm}^2$ BH steel was remarkably retarded due to a 0.07%P addition. The optimum galvannealing temperatures of 35Kgf/$\textrm{mm}^2$ BH steel were ranged from 520 to 56$0^{\circ}C$ in view of the Fe content and powdering resistance. The cross-section and planar views of the galvannealed coatings to characterize morphology development were discussed.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.383-389
• /
• 1999

The purpose of this study was to investigate the effects of alloying and rolling condition on the mechanical properties and to develop high strength line pipe steels with good toughness. Tests were carried out by the laboratory experiments followed by mill trials and mass production. It was found that a small addition of microalloying elements, such as Nb, V with Mo or Ti remarkably increased the strength and toughness of hot strips. The optimum condition of thermomechanical rolling on low carbon microalloyed steel improved the toughness through the formation of a fine and uniform microstructure. Based on this mill trials following the fundamental research, the production technology of line pipe steels, grade X70∼X100 with high toughness, has been established. These grade steels exhibit excellent low temperature toughness (vTs= under -80$^{\circ}C$) and sufficient strength in both the base metal and the ERW seam weld position, respectively.