• Journal of Environmental Science International
• /
• v.8 no.5
• /
• pp.587-592
• /
• 1999

The purpose of this study was to identify the controlling factors to construct tidal flat ecosystems having similar characteristics as natural ones. We transplanted the soil in a constructed tidal flat to a natural one and vice versa. Parameters monitored after these transplantations were silt content, organic matter, bacterial population and oxidation-reduction potential. Moreover, the relationship among silt content, organic matter and bacterial population was investigated by laboratory column experiment. The silt content, organic matter, bacterial population and vertical profile of oxidation-reduction potential in the soil transplanted from the constructed tidal flat to the natural one changed to similar values to those in the natural one. On the contrary, all the parameters for the soil transplanted from the natural tidal flat to the constructed one changed to similar values as those in the constructed one. The silt contents in thses two transplanted solis were in proportion to the organic carbon contents and bacterial population. Similarly, the bacterial population in laboratory column experiment increased with the increase in silt and organic matter contents. It seemed to be important to select a place to enhance accumulative of silt and/or to maintain the silt content by hydrodynamic control of seawater in order to construct a tidal flat having similar characteristics as natural one.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.1
• /
• pp.48-55
• /
• 2018

The purpose of the present study is to compare the reduction rate of natural frequency and the increase rate of damping parameter with structural damage in system. For this purpose, experiment and numerical simulation analysis are performed for the 2-span H-Beam with lower natural frequency and higher damping parameter from free vibration in structure. The response signal by impact load before and after damage is analyzed at 14 locations. The response signals for all locations are performed fast fourier transform to estimate the natural frequency reduction rate and wavelet transform to estimate the damping parameter increase rate. The time domain function corresponding to each scale(frequency) is separated from the response signal by wavelet parameter. The estimation of damping parameter increase rate using wavelet transform is more sensitive than the estimation of natural frequency reduction rate in structure.

• Journal of the Korean Chemical Society
• /
• v.32 no.6
• /
• pp.607-608
• /
• 1988

• Steel and Composite Structures
• /
• v.21 no.1
• /
• pp.195-216
• /
• 2016

The dynamic characteristics of continuous steel-concrete composite beams considering the effect of interlayer slip were investigated based on Euler Bernoulli's beam theory. A simplified calculation model was presented, in which the Mode Stiffness Matrix (MSM) was developed. The natural frequencies and modes of partial-interaction composite continuous beams can be calculated accurately and easily by the use of MSM. Proceeding from the present method, the natural frequencies of two-span steel-concrete composite continuous beams with different span-ratios (0.53, 0.73, 0.85, 1) and different shear connection stiffnesses on the interface are calculated. The influence pattern of interfacial stiffness on bending vibration frequency was found. With the decrease of shear connection stiffness on the interface, the flexural vibration frequencies decrease obviously. And the influence on low order modes is more obvious while the reduction degree of high order is more sizeable. The real natural frequencies of partial-interaction continuous beams commonly used could have a 20% to 40% reduction compared with the fully-interaction ones. Furthermore, the reduction-ratios of natural frequencies for different span-ratios two-span composite beams with uniform shear connection stiffnesses are totally the same. The span-ratio mainly impacts on the mode shape. Four kinds of shear connection stiffnesses of steel-concrete composite continuous beams are calculated and compared with the experimental data and the FEM results. The calculated results using the proposed method agree well with the experimental and FEM ones on the low order modes which mainly determine the vibration properties.

• Composites Research
• /
• v.14 no.3
• /
• pp.1-9
• /
• 2001

A new non-destructive fatigue prediction model of the composite laminates is developed. The natural frequencies of fatigue-damaged laminates under extensional loading are related to the fatigue life of the laminates by establishing the equivalent flexural stiffness reduction as a function of the elastic properties of sublaminates. The flexural stiffness is derived by relating the 90-ply elastic modulus reduction, and using the laminate plate theory to the degraded elastic modulus and the intact elastic modulus of other laminates. The natural frequency reduction model, in which the dominant fatigue mode can be identified from the sensitivity scale factors of sublaminate elastic properties, provides natural frequency vs. fatigue cycle curves for the composite laminates. Vibration tests were also conducted on $[{90}_2/0_2]_s$ carbon/epoxy laminates to verify the natural frequency reduction model. Correlations between the predictions of the model and experimental results are good.

• Journal of Soil and Groundwater Environment
• /
• v.16 no.1
• /
• pp.12-18
• /
• 2011

To investigate the natural reduction characteristics of radon with a short half-life (3.82 day) in drinking Qgroundwater, we analyzed the changes of radon concentrations of groundwater, waters in storage tanks, and tap waters from the small-scale groundwater-supply systems (N = 301) by LSC (Liquid Scintillation Counter). We also analyzed the concentrations of uranium (half-life 4.5 billion years) in the waters by ICP/MS to compare with natural reduction of radon concentration. The radon concentrations of 68 groundwater-supply systems occupying 22.6% of the total samples exceeded the US EPA's Alternative Maximum Contaminant Level (AMCL : 4,000 pCi/L), with the average radon concentration of 7,316 pCi/L (groundwaters), 3,833 pCi/L (tank waters) and 3,407 pCi/L (tap waters). Compared to the radon levels of pumped groundwaters, those of tank and tap waters naturally reduced significantly down to about 50%. Especially, in case of 29 groundwater-supply systems with the groundwater radon concentrations of 4,000~6,000 pCi/L, average radon concentrations of the tank and tap waters naturally decreased down to the AMCL. Therefore this study implies that radon concentrations of drinking groundwater can be effectively reduced by sufficient storage and residence in tanks.

• Food Science of Animal Resources
• /
• v.41 no.6
• /
• pp.1060-1077
• /
• 2021

Food additives are required to maintain the freshness and quality of foods, particularly meats. However, chemical additives may not be preferred by consumers, and natural materials with antimicrobial and antioxidant effects may be used as replacements for common chemical additives. Accordingly, in this study, we compared the antimicrobial and antioxidant activities of natural compounds extracted with ethanol and hot water, and emulsion sausage prepared with natural ethanol extracts was analyzed for pH, color, thiobarbituric acid reactive substances (TBARS), and Clostridium perfringens growth during storage. The antimicrobial activities of 49 natural extract candidates against Listeria monocytogenes, C. perfringens, Salmonella spp., and Escherichia coli were analyzed, and six natural materials with excellent antibacterial activities, i.e., Elaeagnus umbellata Thunb. f. nakaiana (Araki) H. Ohba, Punica granatum L., Ecklonia cava, Nelumbo nucifera Gaertner, and Schisandra chinensis (Turcz.) Baill., and Rubus coreanus Miq. were evaluated to determine their total polyphenol contents and DPPH radical scavenging activities. The total polyphenol contents of ethanol extracts were higher than those of hot water extracts, whereas DPPH radical scavenging activity was found to be higher in hot water extracts. The TBARS values of emulsion sausages were significantly increased as storage time increased, and the TBARS values of emulsion sausages prepared with natural extracts were lower than those of control sausages. Natural extract-treated emulsion sausages showed a 99% reduction in bacterial contents compared with untreated sausages on day 2, with greater than 99.9% reduction after day 3. Thus, these results demonstrated that natural extracts could have applications as natural preservatives in meat products.

• The Research Journal of the Costume Culture
• /
• v.23 no.5
• /
• pp.768-777
• /
• 2015

In this study, the dyeing of silk fabric with Polygonum cuspidatum extracts was investigated. The contents of this study are as follows. First, the proper dyeing conditions were investigated by measuring the dye uptake (K/S value) that depended on the dyeing conditions when silk fabric was dyed with Polygonum cuspidatum extract. Second, the brightness (L), hue, and chroma differences that appear after mordanting with Al, Cu and Fe were investigated by measuring the CIELAB and Munsell values. And third, the colorfastness and antibacterial property were measured. When the silk fabric was dyed with Polygonum cuspidatum extract, the proper dyeing conditions were a colorant concentration of 90% v/v, a dyeing of time 100 minutes, a dyeing temperature of $70^{\circ}C$, and a dyeing of pH 3. In mordanting methods, the dyeabilities of post-mordanting were higher than those of premordanting. The hue value displayed yellow (Y) and yellow-red (YR) in cases of pre and post mordanting. The C value decreased by the mordanting of Polygonum cuspidatum extracts. Generally the colorfastness of mordanted fabrics was improved by mordanting. The dyed fabrics showed a 90.6% of Staphylococcus aureus reduction rate, and the dyed and mordanted fabrics showed 97.1% bacteria reduction rate. The dyed and mordanted fabrics showed above 90.5% Klebsiella pneumoniae reduction rate, and Cu mordant revealed the most effective bacterial reduction.

• Transactions of the Korean hydrogen and new energy society
• /
• v.19 no.4
• /
• pp.348-358
• /
• 2008

Reduction reactivity and carbon deposition characteristics of mass produced oxygen carrier particle(OCN-650) have been investigated by using hydrogen, methane, syngas, and natural gas as fuels. For all fuels, the maximum conversion and oxygen transfer capacity increased as the temperature increase. The reduction rate and the oxygen transfer rate increased as the temperature increase for methane. However, those values showed maximum at 900$^{\circ}C$ for hydrogen, syngas, and natural gas. To explain consistently the change of maximum conversion, reduction rate, oxygen transfer capacity, oxygen transfer rate and degree of carbon deposition for different fuels, new parameters such as reactive carbon contents and require oxygen per input gas were adopted.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.21 no.4
• /
• pp.940-945
• /
• 2007

We have examined the induction of HL-60 cell differentiation by treatment of 2-chloromethyl-1-dihydroxyphosphinyl pyrrolidine(2C-1DPP), which is derivative of piperidine and pyrrolidine by ${\alpha}-phosphoramidoakylation$ reaction. It was observed that HL-60 cell proliferation was dose- and time-dependently inhibited by treatment with 2C-1DPP. 2C-1DPP treatment caused a significant change in NBT reduction and enhanced ATRA-induced NBT reduction. Treatment of 2C-1DPP to HL-60 cells increased only CD11b expression in the cells, and also increased markedly G0/G1 stage arrest of HL-60 cells. These results can suggest that 2C-1DPP induced the differentiation of HL-60 cells to granulocytes lineage and enhanced ATRA-induced differentiation. Moreover, DNA expression levels of p27 were up-regulated during 2C-1DPP-dependent HL-60 cell differentiation. Our results suggest that 2C-1DPP have potential as a therapeutic agent in human leukemia.