• Journal of Welding and Joining
• /
• v.23 no.6
• /
• pp.67-71
• /
• 2005

This paper is concerned with a study on fracture strength of composites in an adhesive single lap joint. The tests were carried out on joint specimens made with hybrid stacked composites consisting of the polyester and bamboo natural fiber layer. The main objective of this work was to evaluate the fracture properties adjacent to adhesive bonded joint of natural fiber reinforced composite specimens. From the results, natural fiber reinforced composites have lower tensile strength than the original polyester. But tensile-shear strength of natural fiber reinforced composites with bamboo layer far from adhesive bond is as high as that of the original polyester adhesive bonded joints. Spew filet at the end of the overlap reduced the stress concentration at the bonded area. Spew fillet and position of bamboo natural fiber layer have a peat effect on the tensile-shear strength of natural fiber reinforced composites including adhesive bonded joints.

• Animal cells and systems
• /
• v.4 no.2
• /
• pp.109-115
• /
• 2000

To clarify taxonomic status of the two sibling species, Moroco oxycephalus and M. lagowskii reproductive isolation mechanisms were investigated at sympatric area located in Kansung-up, Kosung-gun, Kangwon-do, Korea. Genetic analysis was performed to reveal mating system and intensity of Hybridization between the two species. The frequencies of hybrids were increased since 1989, and then the observed hybrid frequencies ($H_O$) did not significantly differ from the expected hybrid ($H_E$) in 1998 and 1999. However, based on histological analysis of two parents and their hybrid s gonads, the hybridizations between M. oxycephalus and M. lagowskii produced mostly fertile females but sterile males in accordance with Haldane s rule. Although it was suspected that pre- and postmating isolation mechanisms were affected between the two species, M. oxycephalus and M. lagowskii seemed to be strongly isolated with microhabitat at sympatry until 1997. Since 1998, hybrid frequencies were increased by habitat disturbance. However, their hybrid frequencies would be reduced by postmating isolation mechanisms. Therefore, the two species are considered to be distinct species recently diverged.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.4
• /
• pp.29-35
• /
• 2013

The objective of the current study is to evaluate the effects depending on the types of reinforcing fibers being influential in view of mechanical properties and impact resistance of hybrid fiber reinforced concrete (HFRC) for applications to precast concrete structure. Hybrid fibers applied therefor were three types such as PP/MSF (polypropylene fiber+macro synthetic fiber), PVA/MAF (polyvinyl alcohol fiber+MSF) and JUTE/MSF (natural jute fiber+MSF), where the volume fraction of PP, PVA and natural jute was applied with 0.2 %, respectively, while based on 0.05 % volume fraction of MSF. The HFRC was tested for slump, compressive strength, flexural strength and impact resistance. The test result demonstrated that mixture of such hybrid fibers improve compressive strength, flexural strength and impact resistance of concrete. Moreover, it was found that HFRCs to which hydrophilic fibers, i.e. PVA/MSF and JUTE/MSF, were mixed show more improved features that HFRC to which non-hydrophilic fiber, i.e. PP/MSF was mixed. Meanwhile, the finding that PVA/MSF HFRC exhibited better performance than JUTE/MSF HFRC was attributed from the former having higher aspect ratio than that of the latter.

• Journal of KSNVE
• /
• v.3 no.3
• /
• pp.259-269
• /
• 1993

For efficient use of composite materials in engineering applications the dynamic behavior, that is, natural frequencies, nodal patterns should be informed. This study presents the experimental and FEM results for the free vibration of cantilevered, symmetrically and antisymmetrically laminated composite triangular plates. The natural frequencies and nodal patterns of a number of CFRP, GFRP, composite-Aluminum and CFRP-GFRP hybrid composite plates are experimentally obtained. A method for the determination of the Young's modulus and test procedures are described. The natural frequencies are determined for a wide range of parameters: e.g., composite material constants, fiber angles and stacking sequences. Natural frequency and nondimensional frequency parameter results are compared with the finite element analysis and existing literatures. Agreement between experimental and calculated frequencies is excellent.

• Korean Journal of Ichthyology
• /
• v.29 no.1
• /
• pp.1-12
• /
• 2017

A natural hybrid of interspecific between the Coreoleuciscus splendidus and C. aeruginos (Cypriniformes: Cyprinidae) was captured in the Hwang-ji Stream, a tributary of the Nakdong River basin in Korea. An interspecific hybrid between C. splendidus and C. aeruginos was genetically identified based on morphological characteristics and the sequence analysis of nuclear recombination activating gene 1 (RAG1) gene (1,334 bp) and mitochondrial cytochrome c oxidase subunit 1 (CO1) gene (1,551 bp). As a result of morphological variations, the natural hybrid appeared to have an intermediate character between two parental species (C. splendidus and C. aeruginos) in three variations of black array (s) on dorsal, caudal and anal fin rays. Phylogenetic analysis inferred from RAG1 and CO1 sequence data revealed that Coreoleuciscus populations from Hwang-ji stream consist of two pure Coreoleuciscus species and a hybrid individual group. The individuals were clearly identified the cross and reciprocal hybrid by CO1 gene analysis. In RAG1 gene, 13 nucleotide variation loci were detected and the hybrid individuals displayed the double peaks of sequence chromatograms at the 9 diagnostic positions. In this study, molecular data and morphological variations were clearly demonstrated that hybridization did occur between C. splendidus and C. aeruginos. However, F2 hybrid generation and reproductive capacity of F1 hybrid individuals were not demonstrated.

• Proceedings of the Zoological Society Korea Conference
• /
• 1999.10b
• /
• pp.256.1-256
• /
• 1999

No Abstract, See Full Text

• Steel and Composite Structures
• /
• v.30 no.1
• /
• pp.31-46
• /
• 2019

In the present study, the various dynamic properties of MWCNT embedded fiber reinforced polymer uniform and tapered composite (MWCNT-FRP) plates are investigated. Various configurations of a tapered composite plate with ply-drop off and uniform composite plate have been considered for the development of the finite element formulation and experimental investigations. First order shear deformation theory (FSDT) has been used to derive the kinetic and potential energy equations of the hybrid composite plates by including the effect of rotary inertia, shear deformation and non-uniformity in thickness of the plate. The governing equations of motion of FRP composite plates without and with MWCNT reinforcement are derived by considering a nine- node rectangular element with five degrees of freedom (DOF) at each node. The effectiveness of the developed finite element formulation has been demonstrated by comparing the natural frequencies and damping ratio of FRP composite plates without and with MWCNT reinforcement obtained experimentally. Various parametric studies are also performed to study the effect of CNT volume fraction and CNT aspect ratio of the composite plate on the natural frequencies of different configurations of CNT reinforced hybrid composite plates. Further the forced vibration analysis is performed to compare the dynamic response of the various configurations of MWCNT-GFRP composite plate with GFRP composite plate under harmonic excitations. It was observed that the fundamental natural frequency and damping ratio of the GFRP composite plate increase approximately 8% and 37% respectively with 0.5wt% reinforcement of MWCNT under CFCF boundary condition. The natural frequencies of MWCNT-GFRP hybrid composite plates tend to decrease with the increase of MWCNT volume fraction beyond 2% due to agglomeration of CNT's. It is also observed that the aspect ratio of the CNT has negligible effect on the improvement of dynamics properties due to randomly orientation of CNT's.

• Journal of Veterinary Science
• /
• v.25 no.4
• /
• pp.58.1-58.8
• /
• 2024

Importance: Over the past decade, catfish farming has increased in Southeast Asia. However, there has been no existing for pharmacokinetic data in the hybrid catfish (Clarias macrocephalus x C. gariepinus). Objective: This study was designed to evaluate the pharmacokinetic characteristics of oxytetracycline (OTC) in the hybrid catfish, following single intravascular (IV) or oral (PO) administration at a single dosage of 50 mg/kg body weight (BW). Methods: In total, 140 catfish (each about 100-120 g BW) were divided into two groups (n = 70). Blood samples (0.6-0.8 mL) were collected from ventral caudal vein at pre-assigned times up to 144 h (sparse samples design). OTC plasma concentrations were analyzed using high-performance liquid chromatography-photodiode array detector. Results: The pharmacokinetic parameter of OTC was evaluated using a non-compartment model. OTC plasma concentrations were detectable for up to 144 and 120 h after IV and PO, respectively. The elimination half-life value of OTC was long with slow clearance after IV administration in hybrid catfish. The average maximum concentration value of OTC was 2.72 ㎍/mL with a time at the maximum concentration of 8 h. The absolute PO bioavailability was low (2.47%). Conclusions and Relevance: These results showed that PO administration of OTC at a dosage of 50 mg/kg BW was unlikely to be effective for clinical use in catfish. The pharmacodynamic properties and clinical efficacy of OTC after multiple medicated feed are warranted.

• Korean Journal of Ichthyology
• /
• v.31 no.4
• /
• pp.235-240
• /
• 2019

The anaesthetic effect of tricaine methanesulfonate (MS-222) concentrations and water temperatures for longtooth grouper (Epinephelus moara) and hybrid grouper (E. moara ♀ × E. lanceolatus ♂) were investigated. Anesthetic induction and recovery time were measured at 18, 22, 26 and 30℃ of Cwater temperature and 100, 150, 200 and 250 ppm of anesthetic concentrations. Anesthetic induction time tended to decrease with increasing concentration and water temperature. Recovery time was proportional to concentration, but inversely proportional to water temperature. However, there was no significant differences in recovery time at 22℃ or lower. The optimal anesthesia condition was 30℃ and 100 ppm, which was the shortest recovery time for longtooth grouper, and 150 ppm at 30℃ in the case of hybrid grouper because anesthetic time is significantly different with 100 ppm in spite of no significant differences with 100 ppm for recovery time. As a results of two-way ANOVA test, there was a significant difference between the species of longtooth and hybrid grouper. On the other hand, there was no interaction effect between concentration and species. Also, there was no interaction effect among species, concentration, and water temperature.

• Journal of the Korean Institute of Gas
• /
• v.18 no.4
• /
• pp.13-20
• /
• 2014

In natural gas distribution system, gas pressure is regulated correspond to requirement using throttle valve which is releasing huge pressure energy as useless form. The waste pressure can be recovered by using turbo machinery devices such as a turbo expander. In this process, excessive temperature drop occurs due to Joule-Thompson effect during the expansion process. Installing natural gas boiler before or after the turbo expander prevents temperature drop. Fuel cell or gas engine hybrid system further improve the efficiency, but 1~2% of total transporting natural gas is used for operating the hybrid system. In this study, a heat pump system is proposed as a preheating device which can be operated without using transporting natural gas. Thermodynamic analysis on evaporating and condensing temperatures and refrigerants is conducted. Results show that R717 is proper refrigerant for the hybrid system with high COP and low turbine work within the defined operating conditions. In domestic usage in Korea, the heat pump system has more economic feasibility owing to natural gas being imported with a high price of LNG form.