Browse > Article
http://dx.doi.org/10.12989/scs.2019.30.1.031

Dynamic characterization of a CNT reinforced hybrid uniform and non-uniform composite plates  

Lakshmipathi, Jakkamputi (School of Mechanical and Building sciences Engineering, Vellore Institute of Technology (VIT))
Vasudevan, Rajamohan (School of Mechanical Engineering, Vellore Institute of Technology (VIT))
Publication Information
Steel and Composite Structures / v.30, no.1, 2019 , pp. 31-46 More about this Journal
Abstract
In the present study, the various dynamic properties of MWCNT embedded fiber reinforced polymer uniform and tapered composite (MWCNT-FRP) plates are investigated. Various configurations of a tapered composite plate with ply-drop off and uniform composite plate have been considered for the development of the finite element formulation and experimental investigations. First order shear deformation theory (FSDT) has been used to derive the kinetic and potential energy equations of the hybrid composite plates by including the effect of rotary inertia, shear deformation and non-uniformity in thickness of the plate. The governing equations of motion of FRP composite plates without and with MWCNT reinforcement are derived by considering a nine- node rectangular element with five degrees of freedom (DOF) at each node. The effectiveness of the developed finite element formulation has been demonstrated by comparing the natural frequencies and damping ratio of FRP composite plates without and with MWCNT reinforcement obtained experimentally. Various parametric studies are also performed to study the effect of CNT volume fraction and CNT aspect ratio of the composite plate on the natural frequencies of different configurations of CNT reinforced hybrid composite plates. Further the forced vibration analysis is performed to compare the dynamic response of the various configurations of MWCNT-GFRP composite plate with GFRP composite plate under harmonic excitations. It was observed that the fundamental natural frequency and damping ratio of the GFRP composite plate increase approximately 8% and 37% respectively with 0.5wt% reinforcement of MWCNT under CFCF boundary condition. The natural frequencies of MWCNT-GFRP hybrid composite plates tend to decrease with the increase of MWCNT volume fraction beyond 2% due to agglomeration of CNT's. It is also observed that the aspect ratio of the CNT has negligible effect on the improvement of dynamics properties due to randomly orientation of CNT's.
Keywords
CNT reinforced composite plates; Modal analysis; vibration; dynamic characterization;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Dai R.L. and Liao, W.H. (2009), "Fabrication, Testing, and Modeling of Carbon Nanotube Composites for Vibration Damping", J. Vib. Acoust., 131(5), 051004-1-051004-9.   DOI
2 DeValve, C. and Pitchumani, R. (2013), "Experimental investigation of the damping enhancement in fiber-reinforced composites with carbon nanotubes", Carbon, 63, 71-83.   DOI
3 Formica, G., Lacarbonara, W. and Alessi, R. (2010), "Vibrations of carbon nanotube-reinforced composites", J. Sound Vib., 329(10), 1875-1889.   DOI
4 Gong, X., Liu, J., Baskaran, S., Voise, R.D. and Young, J.S. (2000), "Surfactant-assisted processing of carbon nanotube/polymer composites", Chem. Mater., 12(4) 1049-1052.   DOI
5 Hashin, Z. (1970), "Complex modulus of viscoelastic composites-II. Fiber Reinforced Materials", Int. J. Solids Struct., 6(6), 797-807.   DOI
6 Jakkamputi, L.P. and Rajamohan, V. (2017), "Dynamic characterization of CNT-reinforced hybrid polymer composite beam under elevated temperature-an experimental study", Polym. Compos. DOI: 10.1002/pc
7 Ashrafi, B. and Hubert, P. (2006), "Modeling the elastic properties of carbon nanotube array/polymer composites", Compos. Sci. Technol, 66(3-4), 387-396.   DOI
8 Bai, J.B. and Allaoui, A. (2003), "Effect of the length and the aggregate size of MWNTs on the improvement efficiency of the mechanical and electrical properties of nanocomposites-experimental investigation", Compos.: Part A: Appl. Sci. Manuf., 34(8), 689-694.   DOI
9 Lau, K.T. (2003), "Interfacial bonding characteristics of nanotube/polymer composites", Chem. Phys. Lett., 370(3-4) 399-405.   DOI
10 Khan, S.U., Li, C.Y., Siddiqui, N.A. and Kim, J.K. (2011), "Vibration damping characteristics of carbon fiber-reinforced composites containing multi-walled carbon nanotubes", Compos. Sci. Technol., 71(12), 1486-1494.   DOI
11 Lei, Z.X., Liew, K.M. and Yu, J.L. (2013), "Free vibration analysis of functionally graded carbon nanotube-reinforced composite plates using the element-free kp-Ritz method in thermal environment", Compos. Struct., 106, 128-138.   DOI
12 Mallick, P.K. (2007), Fiber Reinforced Composites, CRC Press, Boca Raton, FL, USA.
13 Montazeri, A. and Montazeri, N. (2011), "Viscoelastic and mechanical properties of multi walled carbon nanotube/epoxy composites with different nanotube content", Mater. Des., 32(4), 2301-2307.   DOI
14 Montazeri, A., Javadpour, J., Khavandi, A., Tcharkhtchi, A. and Mohajeri, A. (2010), "Mechanical properties of multi-walled carbon nanotube/epoxy composites", Mater. Des., 31(9), 4202-4208.   DOI
15 Thostenson, E.T. and Chou, T.W. (2003), "On the elastic properties of carbon nanotube-based composites: modelling and characterization", J. Phys. D: Appl. Phys., 36(5), 573-582.   DOI
16 Omidi, M., Rokni, D.T.H., Milani, A.S., Seethaler, R.J. and Arasteh, R. (2010), "Prediction of the mechanical characteristics of multi-walled carbon nanotube/epoxy composites using a new form of the rule of mixtures", Carbon, 48(11), 3218-3228.   DOI
17 Qian, D., Dickey, E.C., Andrews, R. and Rantell, T. (2000), "Load transfer and deformation mechanisms in carbon nanotube polystyrene composites", Appl. Phys. Lett., 76(20), 2868-2870.   DOI
18 Rafiee, M., Nitzsche, F. and Labrosse, M.R. (2018), "Effect of functionalization of carbon nanotubes on vibration and damping characteristics of epoxy nanocomposites", Polym. Test. DOI: 10.1016/j.polymertesting.2018.05. 037
19 Rajoria, H. and Jalili, N. (2005), "Passive vibration damping enhancement using carbon nanotube-epoxy reinforced composites", Compos. Sci. Technol., 65(14), 2079-2093.   DOI
20 Sudhagar, P.E., Babu, A.A., Vasudevan, R. and Jeyaraj, P. (2015), "Vibration analysis of a tapered laminated thick composite plate with ply drop-offs", Arch. Appl. Mech., 85(7), 969-990.   DOI
21 Thostenson, E.T., Ren, Z. and Chou, T.W. (2001), "Advances in the science and technology of carbon nanotubes and their composites: a review", Compos. Sci. Technol., 61(13) 1899-1912.   DOI
22 Zhou, X., Wang, K.W. and Bakis, C. (2004), "The investigation of carbon nanotube based polymers for improved structural damping", Proceedings of SPIE on Smart Structures and Materials, San Diego, CA, USA, April.
23 Wang, M., Li, Z.M. and Qiao, P. (2018), "Vibration analysis of sandwich plates with carbon nanotube-reinforced composite face-sheets", Compos. Struct. DOI: 10.1016/j.compstruct.2018.05
24 Yeh, M.K. and Hsieh, T.H. (2008), "Dynamic properties of sandwich beams with MWNT/polymer nanocomposites as core materials", Compos. Sci. Technol., 68(14), 2930-2936.   DOI
25 Yeh, M.K., Tai, N.H. and Liu, J.H. (2009), "Mechanical behavior of phenolic-based composites reinforced with multi-walled carbon nanotubes", Carbon, 44(1), 1-9.   DOI
26 Zhu, P., Lei, Z.X. and Liew, K.M. (2012), "Static and free vibration analyses of carbon nanotube-reinforced composite plates using finite element method with first order shear deformation plate theory", Compos. Struct., 94(4), 1450-1460.   DOI