• 한국생활과학회지
• /
• 제11권4호
• /
• pp.391-400
• /
• 2002

This study was intended to research the dyeing with natural walnut hull extracts over cotton, flax, rayon, wool, nylon and silk. We studied the dyeing conditions and mordant effect, and observed dyeability. The result are as follows: 1. In the dyeability with natural walnut hull extracts, protein and polyamide fiber has more dye uptake rather than cellulose fiber. 2. The optimum condition in the dyeing with natural walnut hull extracts was at $90^{\circ}C$, 12%(o.w.b) concentration in 90 mins. 3. In the case of the dyeability by repeated dyeing number, the dyeability of good dyeability fiber is improved in the first or second dyeing, but that of bad dyebality fiber is improved when it is dyed more repeatedly. 4. In the dyeablity treated with mordants, Al, Sn, and Mg don't have any differences, but Cu and Fe have some difference. The color of Fe mordant is green and the color of Cu mordant is blue. 5. In the case of the color fastness with mordant treatment, nylon is better than silk and wool in color fastness to washing but silk is better than nylon and wool in color fastness to light.

• 한국의류산업학회지
• /
• 제10권6호
• /
• pp.1045-1050
• /
• 2008

Developing of high technology, productivity of the fiber product has being rapidly increased and also various kinds of advanced treatment process lead consumer's needs to more high functional, clean and healthy goods. Moreover, increasing in the concern of eco-friendly material and processing, it has been getting popular that the dyeing method like as using natural dyes is more eco-friendly and natural-friendly treatment process. The method, used in this study, adhesion by binding with micro-capsulized natural material to fabric has low change in quality by external influence and high ability in spray effect by broken capsule which comes to pressure and friction when it dressed. Also it has wide application from natural fiber to synthetic fiber. The purpose of this study is development of multi-functional synthetic material with micro-capsulized Scutellaria baicalensis on PET. Moreover, it was driven by comparison of colormetric properties and fastness between regular dip-dyeing method and binding with micro-capsulized material method. Dye ability was arranged mostly low exhaustion but the PET treated by micro-capsule was more or less better than the dip-dyeing PET. Through the SEM(Scanning Electron Microscope) of PET treated by micro-capsule, it has good residence of capsules even after 5 or 10 times washing. Wash and light fastness was arranged some different grade by each condition but mostly high achievement and the micro-capsulized PET was more improved than regular dip-dyed PET.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 1999년도 추계학술발표대회 논문집
• /
• pp.134-138
• /
• 1999

For the stable operation of high speed aerostatic spindle, the low rotational inertia and high damping ratio of spindle shafts as well as high fundamental natural frequency are indispensable. Conventional steel spindles are not appropriate for very high speed operation because of their high rotational inertia and low damping ratio. In this study, the composite spindles with aerostatic bearing were designed and manufactured with carbon fiber/epoxy composite. The fundamental natural frequency of the composite spindle was evaluated through the modal testing.

• Composites Research
• /
• 제27권1호
• /
• pp.19-24
• /
• 2014

본 연구에서 아마/비닐에스테르(Flax/vinyl ester)를 적용한 친환경 구조물 설계를 위한 선행 연구로서 아마/비닐 에스테르 자연 섬유 복합재료의 기계적 물성치를 분석하였다. 시편 제작을 위해 VARTM 제작 공법이 적용되었다. 참고문헌에서 제시한 자연 섬유 복합재료의 물성치와 본 연구에서 제작된 시편의 물성치를 비교하였다. 이 결과를 바탕으로 아마/비닐 에스테르 복합재료가 친환경 구조물에 적용하는 것이 유리함을 확인하였다.

• Composites Research
• /
• 제37권2호
• /
• pp.115-125
• /
• 2024

환경에 대한 범세계적인 문제와 관심이 고조되는 가운데 자동차 산업에서도 친환경 소재로의 전환이 가속화되고 있다. 자동차 산업에서 친환경 복합재료는 차량 내부 및 비 구조 부품에 주로 사용된다. 특히 천연섬유 복합재료는 차량의 경량화로 연료 소비와 온실가스 배출을 줄이는데 도움을 주며 재활용이 가능하고 우수한 열적 특성과 내구성을 가지고 있어 자동차 내장 부품에 적합하다. 아울러 생산 비용 절감과 지속 가능성은 천연섬유 복합재료의 주요 장점이다. 친환경 복합재료 시장은 2022년부터 2030년까지 연평균 성장률 15.3%로 864억 3천만 달러 규모로 성장할 것으로 기대되며, 천연섬유 복합재료 시장은 2023년부터 2028년까지 연평균 5.3% 성장해 4억 2,400만 달러에 이를 것으로 예상된다. 본 리뷰 논문에서는 천연섬유 복합재료를 중심으로 차세대 자동차용 친환경 복합재료의 연구 동향과 실제 자동차 산업에서의 적용에 대해 탐구한다.

• 한국초지조사료학회지
• /
• 제20권3호
• /
• pp.169-176
• /
• 2000

This experiment was carried out to investigate the effects of application levels of food waste compost andmineral nitrogen in 3 cuttings per annurn on the nutritive value and nutrient yields of orchardgrass (Dactylisglomerata L.). Annual food waste compost (FWC) and mineral nitrogen were applied at levels of 0, 10, 20,40 and 60 ton ha-', and 0, 90, 180 and 270 kg ha-', respectively. The contents of crude protein (CP, %) oforchardgrass were significantly higher at the application levels of 40 ton ha-' yr-' by FWC than those atapplication levels of 0 ton ha-' yr-' (p<0.05), the contents of neutral detergent fiber (NDF, %), acid detergentfiber (ADF, %) and hemicellulose were also higher in FWC applied plots, except for the FWC levels of 10and 60 ton ha-' yr-'. The contents of total digestible nutrient (TDN, %) and relative feed value (RFV) oforchardgrass were significantly higher at FWC levels of 10 and 60 ton ha-' yr-' than at levels of 0 ton ha"yr-'. Annual yields of CP and TDN were increased with increase the FWC levels. The highest contents ofCP of orchardgrass were obtained at 1st cut, NDF and ADF at 2nd cut. As the mineral nitrogen fertilizationwas increased, the contents of CP, NDF, ADF and hemicellulose of orchardgrass were significantly increased,but TDN and RFV were decreased. .Annual yields of CP and TDN of orchardgrass were significantlyincreased with increase the mineral nitrogen fertilization.(Key words : Food waste compost, Mineral nitrogen, Crude protein, Neutral detergent fiber, Acid detergentfiber)rgent fiber, Acid detergent fiber)

• 대한기계학회논문집A
• /
• 제30권7호
• /
• pp.794-799
• /
• 2006

In recent years, the use of natural fiber as reinforcement in polymer composites to replace synthetic fiber such as glass fiber is receiving increasing attention. Because of increasing usage according to the high demand, the cost of thermoplastic has increased rapidly over the past decades. We used a thermoplastic polymer(polypropylene) as the matrix and a lignocellulosic material(rice-husk flour) as the reinforcement filler to prepare a particle-reinforced composite to examine the possibility of using lignocellulosic material as reinforcement filler and to determine data of test results for physical, mechanical and morphological properties of the composite according to the reinforcement filler content in respect to thermoplastic polymer, In this study, PLA/PP rice-husk fiber-reinforced thermoplastic composites that made by the hot press molding method according to appropriate manufacturing process was evaluated as mechanical properties.

• Structural Engineering and Mechanics
• /
• 제37권5호
• /
• pp.529-542
• /
• 2011

Three dimensional solutions for free vibrations analysis of functionally graded fiber reinforced cylindrical panel are presented, using differential quadrature method (DQM). The orthotropic panel is simply supported at the edges and is assumed to have an arbitrary variation of reinforcement volume fraction in the radial direction. Suitable displacement functions that identically satisfy the simply supported boundary condition are used to reduce the equilibrium equations to a set of coupled ordinary differential equations with variable coefficients, which can be solved by differential quadrature method to obtain natural frequencies. The main contribution of this work is presenting useful results for continuous grading of fiber reinforcement in the thickness direction of a cylindrical panel and comparison with similar discrete laminate composite ones. Results indicate that significant improvement is found in natural frequency of a functionally graded fiber reinforced composite panel due to the reduction in spatial mismatch of material properties.

• Journal of Electrical Engineering and Technology
• /
• 제8권1호
• /
• pp.156-162
• /
• 2013

This paper measures the hot spot temperatures in a single-phase, 154 kV, 15/20 MVA power transformer filled with natural ester fluid using optical fiber sensors and compares them with those calculated by conventional heat run tests. A total of 14 optical fiber sensors were installed on the high-voltage and low-voltage windings to measure the hot spot temperatures. In addition, three thermocouples were installed in the transformer to measure the temperature distribution during the heat run tests. In the low-voltage winding, the hot spot temperature was $108.4^{\circ}C$, calculated by the conventional heat run test. However, the hot spot temperature measured using the optical fiber sensor was $129.4^{\circ}C$ between turns 2 and 3 on the upper side of the low-voltage winding. Therefore, the hot spot temperature of the low-voltage winding measured using the optical fiber sensor was $21.0^{\circ}C$ higher than that calculated by the conventional heat run test.

• 펄프종이기술
• /
• 제48권3호
• /
• pp.66-72
• /
• 2016

The applicability of rice husk fiber as a raw material for eco-friendly pulp mold was evaluated in this study. The higher demand of environmental friendly packaging material resulted in the more interest for the natural fiber based pulp mold. The rice husk which is an abundant agricultural byproduct in Asia could be defiberized by an alkaline digestion process. The changes in the pulp mold making process and the properties of pulp mold by the addition of the rice husk were investigated. The addition of rice husk fiber to the pulp mold made with OCC or UBKP resulted in the increase in drainage at the pulp mold forming process. In case of UBKP pulp mold, the addition of rice husk fiber increased the drying efficiency after pulp mold forming since the structure of pulp mold became more bulkier by the addition of the rice husk fiber. Those results showed the rice husk fiber could be applied to the pulp mold manufacturing as one of the eco-friendly natural fiber resources.