• Macromolecular Research
• /
• v.16 no.6
• /
• pp.539-543
• /
• 2008

Many natural proteins self-assemble in complex ways, either to fulfill their biological function or introduce particular properties, such as high strength and toughness. We report the morphological transition in water from a spherical to rod-like shape of Bombyx mori silk fibroin by reducing the pH. Transmission electron microscopy, scanning electron microscopy, and dynamic light scattering were used to characterize the dilute solutions of silk fibroin in an aqueous environment, and provide direct visualization of the transformation of spherical micelles at pH 6.8 to nanofibrils at pH 4.8. This change in morphology occurred as a result of the stretching entropy due to the formation of $\beta$-sheets, which was analyzed using circular dichroism spectroscopy. This study demonstrates the self-assembly of silk fibroin as a function of pH.

• Smart Structures and Systems
• /
• v.25 no.3
• /
• pp.345-368
• /
• 2020

The present work proposes a self-controlled multi-stage optimization method for damage identification of structures utilizing standard particle swarm optimization (PSO) algorithm. Damage identification problem is formulated as an inverse optimization problem where damage severity in each element of the structure is considered as optimization variables. An efficient objective function is formed using the first few frequencies and mode shapes of the structure. This objective function is minimized by a self-controlled multi-stage strategy to identify and quantify the damage extent of the structural members. In the first stage, standard PSO is utilized to get an initial solution to the problem. Subsequently, the algorithm identifies the most damage-prone elements of the structure using an adaptable threshold value of damage severity. These identified elements are included in the search space of the standard PSO at the next stage. Thus, the algorithm reduces the dimension of the search space and subsequently increases the accuracy of damage prediction with a considerable reduction in computational cost. The efficiency of the proposed method is investigated and compared with available results through three numerical examples considering both with and without noise. The obtained results demonstrate the accuracy of the present method can accurately estimate the location and severity of multi-damage cases in the structural systems with less computational cost.

• International journal of advanced smart convergence
• /
• v.10 no.2
• /
• pp.151-157
• /
• 2021

Livestock farmers are using animal carcasses to dispose of the carcasses of livestock that have died of natural causes or disease. Most of the existing livestock carcass processors are mechanical in their structure without considering the environment. It has a function of sterilizing dead bodies at high pressure after processing them and causes environmental problems such as carbon monoxide emissions. If livestock carcasses occur, livestock farmers have to purchase their own livestock carcasses or entrust them to the outside world, which is costly. For this reason, the possibility of environmental pollution, infectious diseases, and spread has been increased recently by frequent dumping of dead bodies. The carcass of livestock mixed with manure not only serves as a medium for infectious diseases but also needsto be buried on a large scale as foot-and-mouth disease and avian influenza spread. As a result, the possibility of environmental pollution, such as contamination of groundwater, is increasing, so research is needed to protect and improve the environment. We aim to improve the process of processing livestock carcasses and purify the agricultural environment through development results on the form, structure and function of eco-friendly livestock carcasses. Its shape is applied with naturalshapessuch asstones and seeds. The material used in the dead body processis a brown beggar biocouple and is applied with an eco-friendly industrial animal recycling process. As a result of the study, it is expected to improve odors and the environment, and to be used as data to improve and help the livestock industry in the future.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2000.04b
• /
• pp.69-76
• /
• 2000

In this study, an improved analysis model for the more efficient and accurate structural analysis of cable-stayed bridges is presented. In this model, beam elements, of which stability functions are stabilized by the use of Taylor's series expansions, are used to model space frame structures, and truss elements, of which equivalent elastic moduli are evaluated on the assumption that the deflected shape of a cable has a catenary function, are used to model cables. By using the proposed analysis model, nonlinear static analysis and natural vibration analysis of 2-dimensional and 3-dimensional cable-stayed bridges are carried out and are compared with the analysis results reported by other researchers.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.12
• /
• pp.188-193
• /
• 1998

This paper describes static and dynamic weak point analysis of spindle systems to eliminate high concentrated bending point on spindle and improve total stiffness of spindle systems. The weak point analysis is based on the evaluation of bending curves of spindles. For static weak point analysis the bending curve is derived from static deflection curve and for dynamic weak point analysis it is derived from the mode shape curves in consideration of the transfer function at exciting point. The validity of the weak point search methodology is verified by comparison of the static deflection, the natural frequency and the dynamic compliance between the original and the improved spindle.

• Journal of KSNVE
• /
• v.7 no.3
• /
• pp.467-475
• /
• 1997

A rotor-bearing system has been investigated, including internal damping and axial torque using finite dynamic elements. A procedure is presented for dynamic modeling of rotor-bearing system which consist of finite dynamic shaft elements, rigid disk, and bearing and seal. A finite dynamic element model including the effects of rotatory inertia, gyroscopic moments, axial force, and axial torque is developed using the frequency dependent shape function. The natural whirl speeds, stability, and unbalance response of rotor system are calculated on several cases and compared with the conventional finite elements.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.224-229
• /
• 1997

This paper compares the control techniques for position control experiments of a fixible robot moving in a vertical plane. The flexible manipulator is modeled as an Euler-beroulli beam. Elastic deformantion is representedusing the assumed model method. A comparison function which satisfies all geometric and natural boundary conditions of a cantilever beam with an end mass is used as an assumed mode shape. Lagrange's equation is utilized for the development of a discretized model. Control schemes are developed using PID control,pole placement control and discrete Linear Quadratic Regulater(LQQ). The effectiveness of the developed control schems are compared using computer simulation in view of practical experiment. The simulation results show that PID control is very effective in practical implementation.

• The International Journal of Costume Culture
• /
• v.5 no.2
• /
• pp.1-14
• /
• 2002

The first purpose of this research is to investigate the functionalistic concept through the general consideration of Functionalism, and to study the art's aesthetic value of functionalistic expressionist artists implication and form in terms of architecture and product design. Secondly, it analyzes the implication and shape of Functionalism towards 'Art to Wear', which can be explained as a mixture of fashion and art. The results are as follows; First, functionalistic 'Art to Wear' of Mechanical Analogy appears to have futuristic inclination stressing the significance of geometric shapes and machine aesthetics. It uses new materials, and reduce an unnecessary work of art to convey more accurate, concrete and effective character of form. Secondly, functionalistic 'Art to Wear' of Organic Analogy regards natural elements as important to pursue the warm human nature. Also, it appears to be free and comforting forms of Functionalism through an organic silhouette. Thirdly, functionalistic 'Art to Wear' of Moral Analogy excludes excessive ornaments, and includes the implication of appropriate and purposive purity which serves for practical function.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.571-575
• /
• 2000

The physical properties of the spatial model, mass, stiffness and damping matrix, can be defined by a specific natural frequency, damping ratio and mode shape. These modal parameters can be determined from a set of frequency response function(FRF) measured by exciting the structure and measuring the responses at various points around the structure. In this paper, The Transfer Matrix is obtained by experimental modal analysis for the 3-story scaled building model which TMD is installed on top and the physical properties of the spatial model is determined using the residue matrix and the location of poles from FRF measurement using polynomial curve fitting methods.

• Journal of KSNVE
• /
• v.7 no.2
• /
• pp.331-345
• /
• 1997

A theoretical formulation for the analysis of free vibration of clamped-free cylindrical shells with plates attached at arbitrary axial position(s) was completed and it was programed to get the numerical results which yield natural frequencies and mode shape of the combined system of the plate and the shells. The frequencies and mode shapes from theoretical calculation were compared with those of commercial finite element code, ANSYS. In order to validate the theory, modal test was also performed by impact test and FFT analysis. The results shows good agreement with those of ANSYS and test results in frequencies and mode shapes. The method developed herein is likely to be used for the analysis of the free vibration of the clamped-free circular cylindrical shells with any kinds of lids such as hollow circular plates, conical shells, spherical shells, or semi-spherical shells.