• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.102-102
• /
• 2010

One or two-dimensional nanostructures such as nanowires or nanomats have been widely uses as building blocks for nanoscale electronic devices. Nanofiber is one of sub-category of nano structures, it is easy to make nano-sized fiber by electrospinning technique. Nanofiber has large surface area as compared with their volume, it could be widely applied to many areas easily. Electrospinning technique is easy to control their structures and morphology safely and cost-effectively. We made nano-rings as a model of one dimensional nanostructures by electrospinning technique. To our knowledge, there were no reports on the preparation and investigation of alumina nano-rings by electrospinning technique. In this study, aluminum oxide nano-rings were produced after electospinning and calcination. The synthesized aluminum oxide nano-rings were characterized by scanning electron microscopy (SEM) to identify the morphology and the diameter of the ring, X-ray diffraction (XRD) to verify the crystallinity of the aluminum oxide, and X-ray photoelectron spectroscopy (XPS) for investigation of the chemical nature of the synthesized nano-rings.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2002년도 제22회 학술발표회 초록집
• /
• pp.39-40
• /
• 2002

• Steel and Composite Structures
• /
• 제33권5호
• /
• pp.653-661
• /
• 2019

In this paper aeroelastic behavior of 3-phase nano-composite beam-plate with double delaminations is investigated. It is tried to study the effect of carbon nano-tubes (CNTs) on critical flutter pressure of reinforced damaged nano-composite structures. In this case, the CNTs are appending to the polymer matrix uniformly. The Eshelby-Mori-Tanaka model is used to obtain the effective material properties of 3-phase nano-composite beam-plate. To investigate the aeroelastic behavior of delaminated beam-plate subjected to supersonic flow, it is assumed that the damaged segments are forced to vibrate together. The boundary conditions and auxiliary conditions at edges of delaminated segments are used to predict critical flutter pressure. The influence of CNTs and different delamination parameters such as delamination length, axial position and its position through thickness are investigated on critical flutter pressure.

• Steel and Composite Structures
• /
• 제26권5호
• /
• pp.607-620
• /
• 2018

Vibration analysis of deep curved FG nano-beam has been carried out based on modified couple stress theory. Material properties of curved Timoshenko beam are assumed to be functionally graded in radial direction. Governing equations of motion and related boundary conditions have been obtained via Hamilton's principle. In a parametric study, influence of length scale parameter, aspect ratio, gradient index, opening angle, mode number and interactive influences of these parameters on natural frequency of the beam, have been investigated. It was found that, considering geometrical deepness term leads to an increase in sensitivity of natural frequency about variation of aforementioned parameters.

• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.269-269
• /
• 2016

DNA origami is the most fitting nano-technology for synthesis of complex nano-structures. DNA crossover which ties DNA helices together are the main reason for the stable sustenance of origami structures with respect to other nano-scale structures. The mechanical properties of DNA crossovers have profound connection with structural rigidity, and it is a known fact that the rigidity changes depending on the arrangement of crossovers. It is possible to control the rigidity of origami structures for functionality and furthermore extends the field of DNA origami application. Here, we investigate the effect of crossovers on 2-Dimensional DNA structures varying crossover arrangement by sensitivity analysis based on finite element model. The crossover properties obtained from this analysis are compared with the existing experimental results.

• 한국진공학회지
• /
• 제12권4호
• /
• pp.288-292
• /
• 2003

Air hole 구조를 갖는 2차원 고분자 광결정 도파로를 나노 임프린트 방법으로 제작하기 위하여, e-beam lithography와 ICP etching 공정을 이용하여 기둥 구조를 갖는 실리콘 나노 마스터를 제작하였다. Air hole 구조를 갖는 광결정 구조를 얻기 위해, 실리콘 마스터 기둥의 형태를 4각형, 6각형, 12각형 및 원으로 설계하였다. 제작된 기둥의 직경과 구조를 CD-SEM과 SPM-AFM을 이용하여 측정하였으며, dose가 432 $\mu$C/$\textrm{cm}^2$일 때 최적의 dose임을 확인하였다.

• 한국정밀공학회지
• /
• 제29권12호
• /
• pp.1279-1284
• /
• 2012

Micro structures which are widely used at various fields are commonly fabricated by lithograph, etching and laser methods. Recently, with the emergence of micro tools and ultra-precision machine tools, fabrication of the micro structures obtained using end-milling are studied. However, there are some problems due to the diameter of the micro end-mill getting smaller below $100{\mu}m$. The micro run-out resulted from miniaturization of end-mills have influence seriously on accuracy of micro structures. The error of run-out with a tooling jig showed a decrease of about $9.3{\mu}m$. Furthermore, micro structures with width of $30{\mu}m$ could be applied through experiments of slot machining obtained using 30 and $50{\mu}m$ end-mill. Also, narrow angle structures with $30^{\circ}$ angle could be applied through analysis of machining acute angle structures. Based on basic experiments, micro fluidics channels and spiral patterns for air bearing were machined.

• 한국진공학회지
• /
• 제19권4호
• /
• pp.300-306
• /
• 2010

소수성 고분자를 사용하여 제작한 마이크로구조에 금 나노입자를 마스크로 이용하는 반응성이온식각(RIE: Reactive Ion Etching)을 적용하여 초소수성을 갖는 마이크로-나노 혼성구조를 제작하였다. 소수성 고분자로는 PFPE (perfluoropolyether bisurethane methacrylate)를 사용하였으며 마이크로 단일구조는 PDMS (polydimethylsiloxane) 몰드를 사용하는 스탬핑 방식으로 제작하였다. 다양한 형태로 제작한 PFPE 마이크로 단일구조와 마이크로-나노 혼성구조의 표면 접촉각을 측정하여 표면 미세구조에 따른 소수성의 변화를 관찰하였다. 마이크로 단일구조의 경우 접촉각은 안정적인 값을 보이지 못하였으나 단일 구조에 나노입자를 사용한 식각을 적용해 나노구조가 형성됨에 따라 $150^{\circ}$ 이상의 접촉각을 갖는 초소수성 표면이 매우 높은 재현성으로 용이하게 형성되었다.

• 한국전산구조공학회논문집
• /
• 제24권4호
• /
• pp.413-419
• /
• 2011

나노 크기의 허니콤 구조물은 거시적 크기의 허니콤 구조물에 비해 보다 높은 부피 대비 표면적 비율을 구현하여 전기적, 화학적인 촉매로써 기능성을 극대화할 수 있다. 나노 크기의 구조물은 거시적 크기의 구조물과 다른 기계적 거동양상을 보이며 이는 표면효과에 기인한다. 이러한 표면효과는 원자 수준 전산모사(atomistic simulation)를 통해 규명할 수 있으나 나노 허니콤 구조물의 거동을 예측하는 것은 현실적으로 과도한 전산자원 및 계산시간으로 인해 불가능한 실정이다. 본 연구에서는 표면응력 탄성모델을 적용한 브리징방법을 균질화기법과 연계하여 나노 크기의 허니콤 구조물의 기계적 거동을 효율적으로 예측하였다.

• 센서학회지
• /
• 제19권6호
• /
• pp.403-420
• /
• 2010

Nano and micro structure-based biosensors are promising tool for label-free detection of biomolecular interactions with great accuracy. This review gives a brief survey on nano and micro platforms to sense a variety of analytes such as DNA, proteins and viruses. Among incredible nano and micro structure for bio-analytical applications, the scope of this paper will be limited to micro and nano resonators and nanowire field-effect transistors. Nanomechanical motion of the resonators transducers biological information to readable signals. They are commonly combined with an optical, capacitive or piezo-resistive detection systems. Binding of target molecule to the modified surface of nanowire modulates the current of the nanowire through electrical field-effect. Both detection methods have advantages of label-free, real-time and high sensitive detection. These structures can be extended to fabricate array-type sensors for multiplexed detection and high-throughput analysis. The biosensors based on these structures will be applied to lab-on-a-chip platforms and point-of-care diagnostics. Basic concepts including detection mechanisms and trends in their fields will be covered in this review.