• 한국진공학회지
• /
• 제9권4호
• /
• pp.328-334
• /
• 2000

ECR-PECVD 방법을 이용하여 ECR power, $CH_4/H_2$ 가스 혼합비와 유량, 증착시간을 고정시켜놓고 기판 bias 전압을 변화 시켜가면서 DLC 박막을 제작하였고, 제작된 박막의 두께, Raman과 FTIR 스펙트럼 그리고 미소경도 등을 측정 및 분석하여 기판 bias전압에 따른 이온충돌이 박막의 특성 변화에 미치는 영향을 조사하였다. FTIR 분석 결과로부터 기판 bias 전압을 증가시킬수록 이온충돌 현상이 두드러져 탄소와 결합하고 있던 수소원자들의 탈수소화 현상을 확인할 수 있었고, 박막의 두께는 bias 전압을 증가시킬수록 감소되었다. 그리고 Raman 스펙트럼으로부터 Gaussian curve fitting을 통하여 $sp^3$/$sp^2$의 결합수에 비례하는 D와 G peak의 면적 강도비(ID/IG)는 기판 bias 전압을 증가시킬수록 증가하였고, 또한 경도도 증가하였다. 이 결과로부터 본 연구에서 제작된 수소를 함유한 비정질 탄소 박막은 기판 bias 전압의 크기를 증가시킬수록 DLC 특성이 더 향상됨을 알 수 있었다.

• 한국식품조리과학회지
• /
• 제26권3호
• /
• pp.246-251
• /
• 2010

This study was conducted to investigate the quality characteristics of guavapyun after the addition of different ratios of extract (0.25, 0.5, 0.75, 1.0%), non-extract and vitamin C. The quality if the pyun containing 0.5% of the guava fruit extract (guavapyun) and vitamin C was higher compared with the quality of the control pyun. In the results of the proximatecomposition, the content of water was high in the control pyun relative to the vitamin C pyun and guavapyun and the carbohydrate, ash, crude lipid and protein content was high in guavapyun. The sweetness, pH and color (L, a, b value) were very high in the samples. The texture, hardness, chewiness and gumminess were significantly high in the control pyun and the adhesiveness and cohesiveness were high in guavapyun. However, there were no significant differences in springiness between the control and the added samples. The total phenolic content was higher in guavapyun (23.57 mg GAE/100 g) than the control pyun (18 mg GAE/100 g) and vitamin C pyun(15.05 mg GAE/100 g). The antioxidant activities determined by the DPPH method and ABTS method was higher in guavapyun (41.37 mM TE/g, 15.35 mM TE/g) than the control pyun (4.43 mM TE/g, 2.17mM TE/g) and vitamin C pyun (11.33 mM TE/g, 4.51 mM TE/g). Using the FRAP method, guavapyun(9.06 mM TE/g) was shown to exhibit a stronger ferrous ion chelating activity than the control pyun (4.49mM TE/g) and vitamin C pyun (7.03 mM TE/g). Thus, the studied indigenous guavapyun was high in both antioxidative activity and total phenolic content.

• 한국진공학회지
• /
• 제8권1호
• /
• pp.43-50
• /
• 1999

이온빔보조증착법으로 h-BN을 증착하여 이온에너지 및 기판온도에 따른 hexagonal ring의 배열 및 결정성의 변화를 연구하였다. 보론은 전자빔으로 1.5 $\AA$/sec 의 속도로 증발시켰으며, 질소는 둥-hall 형 이온건으로 60, 80, 100eV의 에너지로 공급하였다. 기판의 온도는 상온(no heating), 200, 400, 500, $800^{\circ}C$로 변화시켰다. 질소이온에너지가 증가할수록 hexagonal ring의 c축은 기판에 평행하게 배열하여 100 eV의 질소이온에너지에서 가장 좋은 배열을 나타내었다. 이는 이온에너지가 높을수록 합성 막에 큰 압축응력이 발생하기 때문으로 생각된다. 기판온도에 따라서는 온도가 증가함에 따라 배열이 증가하다가 약 $400^{\circ}C$에서 최대가 되고 그 보다 높은 온도에서는 배열이 감소하였다. 그리고 결정도는 온도가 증가할수록 향상되었다. 이러한 경향들은 온도가 증가함에 따라 원자 이동도는 증가하고 응력발생은 어려워지는 경향으로부터 잘 설명된다. 또한 nano-indentor로 측정한 h-BN막의 경도는 c-축의 배열정도와 같은 경향을 보였다. 이온빔보조증착법은 hexagonal ring의 배열을 통해 h-BN막 성질의 최적화에 효과적인 방법으로 판단된다.

• Journal of Welding and Joining
• /
• 제32권2호
• /
• pp.29-36
• /
• 2014

Recently, in order to enhance the function and usefulness of products, cladding of dissimilar materials that maximizes the performance of the material is being widely used in all areas of industry as an important process. Clad steel plate, produced by cladding stainless steel plate, an anticorrosive material, on carbon steel plate, is being used to produce pressure vessels. Stainless steel plate has good corrosion resistance, and carbon steel plate has good rigidity and strength; clad steel can satisfy all of these qualities at once. This study aims to find the ${\delta}$-ferrite behavior, mechanical properties, structure change, integrity and reliability of clad steel weld on hot rolled steel plates. For this purpose, multi-layer welding, repair welding and post weld heat treatment were implemented according to welding procedure specifications (WPS). In order to observe the mechanical properties and toughness of clad steel weld zone, post weld heat treatment was carried out according to ASME Sec. VIII Div.1 UW-40 procedure for post weld heat treatment. With heat treatment at $625^{\circ}C$, the hold time was used as the process variable, increased by intervals that were doubled each time, from 80 to 1,280 min. The structure of weld part was typical cast structure; localized primary austenite areas appeared near central vermicular ferrite and fusion line. The heat affected zone showed rough austenite structure created by the weld heat input. Due to annealing effects of heat treatment, the mechanical properties (tensile strength, hardness, impact value) of the heat affected area tended to decrease. From the results of this study, it is possible to conclude the integrity of clad steel welds is not affected much in field welding, repair welding, multi-layer welding, post weld heat treatment, etc.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2016년도 추계학술대회 논문집
• /
• pp.152-152
• /
• 2016

Anodizing is a technology to generate thicker and high-quality films than natural oxide films by treating metals via electrochemical methods. It is a technique to develop metals for various uses, and extensive research on the commercial use has been performed for a long time. Aluminum anodic oxide (AAO) is generate oxide films, whose sizes and characteristics depending on the types of electrolytes, voltages, temperatures and time. Electrochemical manufacturing method of nano structure is an efficient technology in terms of cost reduction, high productivity and complicated shapes, which receives the spotlight in diverse areas. The sulfuric acid was used as an anodizing electrolyte, controlling its temperature to $10^{\circ}C$. The anode was 5083 Al alloy with dimension of $5(t){\times}20{\times}20mm$ while the cathode was the platinum. The distance between the anode and the cathode was maintained at 3 cm. Agitation was introduced by magnetic stirrer at 300 rpm to prevent localized temperature rise that hinders stable growth of oxide layer. In order to observe surface characteristics with applied current density, the electrolyte temperature, concentration was maintained at constant condition for $10^{\circ}C$, 10 vol.%, respectively. To prevent hindrance of stable growth of oxide layer due to local temperature increase during the experiment, stirring was maintained at constant rate. In addition, using galvanostatic method, it was maintained at current density of $10{\sim}30mA/cm^2$ for 40 minutes. The cavitation experiment was carried out with an ultrasonic vibratory apparatus using piezo-electric effect with modified ASTM-G32. The peak-to-peak amplitude was $30{\mu}m$ and the distance between the horn tip and specimen was 1 mm. The specimen after the experiment was cleaned in an ultrasonic, dried in a vacuum oven for more than 24 hours, and weighed with an electric balance. The surface damage morphology was observed with 3D analysis microscope. As a result of the investigation, differences were observed surface hardness and anti-cavitation characteristics depending on the development of oxide film with applied current density.

• 한국재료학회지
• /
• 제19권7호
• /
• pp.369-375
• /
• 2009

The spot weldability of dissimilar metal joints between stainless steels (AISI316) and interstitial free (IF) steels were investigated. This study was aimed to determine the spot welding parameters for a dissimilar metal joint and to evaluate the dissimilar metal joint's weldability, including its welding nugget shape, tensileshear strength, hardness, and microstructure. The fracture surface was investigated by using a Scanning Electron Microscopy (SEM). The experimental results showed that the shape of nugget was asymmetric, in which the fusion zone of the STS316 sheet was larger due to the higher bulk-resistance. The microstructure of the fusion zone was fully martensite. In order to evaluate the microstructure further, dilution of stainless steels were calculated and imposed onto the Schaeffler diagram. The predicted microstructure from the Schaeffler diagram was martensite. In order to confirm the predicted microstructure, XRD measurements were carried out. The results showed that that initial weld nugget was composed of austenite and martensite.

• 한국정밀공학회지
• /
• 제23권8호
• /
• pp.171-177
• /
• 2006

This study was performed as a part of the research on the development of a maskless and electroless process for fabricating metal micro/nanostructures by using a nanoindenter and an electroless deposition technique. $2-{\mu}m$-deep indentation tests on Ni and Cu samples were performed. The elastic recovery of the Ni and Cu was 9.30% and 9.53% of the maximum penetration depth, respectively. The hardness and the elastic modulus were 1.56 GPa and 120 GPa for Ni and 1.51 GPa and 104 GPa for Cu. The effect of single-point diamond machining conditions such as the Berkovich tip orientation (0, 45, and $90^{\circ}$ ) and the normal load (0.1, 0.3, 0.5, 1, 3, and 5 mN), on both the deformation behavior and the morphology of cutting traces (such as width and depth) was investigated by constant-load scratch tests. The tip orientation had a significant influence on the coefficient of friction, which varied from 0.52-0.66 for Ni and from 0.46- 0.61 for Cu. The crisscross-pattern sample showed that the tip orientation strongly affects the surface quality of the machined are a during scratching. A selective deposition of Cu at the pit-like defect on a p-type Si(111) surface was also investigated. Preferential deposition of the Cu occurred at the surface defect sites of silicon wafers, indicating that those defect sites act as active sites for the deposition reaction. The shape of the Cu-deposited area was almost the same as that of the residual stress field.

• 대한금속재료학회지
• /
• 제49권2호
• /
• pp.161-166
• /
• 2011

The aim of this study was to determine the effect of high-energy mechanical milling (HEMM) time and sintering temperature on microstructure and mechanical properties of the TiAl composite fabricated by pulse current activated sintering. TiAl intermetallic powders were milled by HEMM for 1h, 4h, and 8h respectively. Thermal analysis was used to observe the phase transformation of the milled TiAl powders. The sintering time decreased with increase of milling time. The hardness and fracture toughness of the sintered specimens also was improved with increasing milling time. The grain size of the sintered specimens which was milled for 4h was in the range of 50~100 nm.

• 대한금속재료학회지
• /
• 제50권12호
• /
• pp.891-896
• /
• 2012

Nanopowders of MgO and $TiO_2$ were made by high energy ball milling. The rapid synthesis and sintering of the nanostructured $MgTiO_3$ compound was investigated by the high-frequency induction heated sintering process. The advantage of this process is that it allows very quick densification to near theoretical density and inhibition grain growth. Nanocrystalline materials have received much attention as advanced engineering materials with improved physical and mechanical properties. As nanomaterials possess high strength, high hardness, excellent ductility and toughness, undoubtedly, more attention has been paid for the application of nanomaterials. A highly dense nanostructured $MgTiO_3$ compound was produced with simultaneous application of 80 MPa pressure and induced current within 2 min. The sintering behavior, gain size and mechanical properties of $MgTiO_3$ compound were investigated.

• 대한금속재료학회지
• /
• 제49권5호
• /
• pp.374-379
• /
• 2011

Nano-powders of $Ti_3Al$ and $2Al_2O_3$ were synthesized from $3TiO_2$ and 5Al powders by high energy ball milling. A nanocrystalline $Al_2O_3$ reinforced composite was consolidated by pulsed current activated sintering within 2 minutes from mechanochemically synthesized powders of $Al_2O_3$ and $Ti_3Al$. Nanocrystalline materials, have received much attention as advanced engineering materials due to their improved physical and mechanical properties. The relative density of the composite was 99.5%. The average obtained hardness and fracture toughness values were 1510 kg/$mm^2$ and $9\;MPa{\cdot}m^{1/2}$, respectively.