• 한국분말재료학회지
• /
• 제26권5호
• /
• pp.383-388
• /
• 2019

To improve the mechanical properties of aluminum, graphene has been used as a reinforcing material, yielding graphene-reinforced aluminum matrix composites (GRAMCs). Dispersion of graphene materials is an important factor that affects the properties of GRAMCs, which are mainly manufactured by mechanical mixing methods such as ball milling. However, the use of only mechanical mixing process is limited to achieve homogeneous dispersion of graphene. To overcome this problem, in this study, we have prepared composite materials by coating aluminum particles with graphene by a self-assembly reaction using poly vinylalcohol and ethylene diamine as coupling agents. The scanning electron microscopy and Fourier-transform infrared spectroscopy results confirm the coating of graphene on the Al surface. Bulk density of the sintered composites by spark plasma sintering achieved a relative density of over 99% up to 0.5 wt.% graphene oxide content.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.406-409
• /
• 2009

In this work, the magnetite ($Fe_3O_4$)/multi-walled carbon nanotubes (MWNTs) composites for lithium secondary battery were prepared. Nano-$Fe_3O_4$ was deposited by chemical coprecipitation of $Fe^{2+}$ and $Fe^{3+}$ in the presence of MWNTs in alkaline solutions. Transmission electron spectroscopy (TEM) and X-ray diffraction (XRD) analyses indicated that nano-$Fe_3O_4$ particles had a good crystallinity of cubic specimens and many tiny particles attached on the surfaces of the MWNTs. The electrochemical properties of $Fe_3O_4$/MWNTs composites as anodes in lithium-secondary batteries were evaluated by cyclic voltammetry and galvanostatic charge/discharge techniques. The as-prepared $Fe_3O_4$/MWNTs composites showed an initial lithium storage capacity of 1120 mAh/g and a reversible capacity of 394 mAh/g after 100 cycles, demonstrating better performance than that of the commercial graphite anode materials.

• Composites Research
• /
• 제25권6호
• /
• pp.178-185
• /
• 2012

본 연구에서는 기능성 나노복합재를 제작하는 방법이 제시되었다. 미소 입자들을 포함하고 있는 점성을 가진 유체에 전기장을 가하여 유체속에 포함된 입자들을 전기장의 방향에 따라 규칙적으로 배열을 하였다. FAiMTa 기술이라고 불리는 이 방법은 마이크로 혹은 나노 사이즈의 입자들을 체인의 형태로 배열하여 직교이방성 폴리머 나노복합재의 제작을 가능하게 하였다. 알루미나($Al_2O_3$), 탄소나노튜브(CNT), 탄소(Graphite), 텅스텐(W) 등의 마이크로 혹은 나노 사이즈 입자 분말을 사용하여 FAiMTa기술의 유효성을 확인하는 시험을 수행하였다. 이러한 입자들을 전기장을 사용하여 일정한 방향으로 배열하여 직교이방성 폴리머 복합재를 만들었고, 시험시편의 물리적 특성 즉 기계적 열적 특성을 측정하여 방향성을 확인하였다. 이렇게 제작된 첨단 나노복합재는 각종 산업분야에서 큰 효과가 기대된다.

• Composites Research
• /
• 제23권3호
• /
• pp.7-12
• /
• 2010

탄소섬유 복합재료의 전기전도도와 기계적 강도를 높이기 위하여 음극 및 양극 전기영동법을 이용하여 탄소나노튜브(MWCNT)와 탄소나노섬유(CNF)를 탄소섬유직물에 부착하였다. 양극 전기영동에서는 MWCNT와 CNF의 탄소나노 입자들만이 탄소 섬유에 부착되었으나, 음극 전기영동에서는 MWCNT와 CNF 및 나노 크기의 구리 입자가 동시에 탄소섬유직물에 부착되었고 이에 따라 부착 밀도 및 복합재료 물성의 증대라는 시너지 효과를 거둘 수 있었다. 특히 나노 크기의 탄소나노입자 및 마이크로 크기의 탄소 섬유가 혼합된 멀티스케일 복합재료의 제조를 통해 두께 방향 전기전도도의 높은 향상을 얻었다. 또한 MWCNT와 CNF를 동시에 멀티스케일 복합재료에 적용하였을 경우, 각각을 적용한 경우보다 두께 방향 전기전도도가 높게 나타났다.

• 한국재료학회지
• /
• 제13권4호
• /
• pp.213-218
• /
• 2003

Fibrous monolithic control of$ Al_2$$O_3$ -$ZrO_2$composite was investigated by multi-pass extrusion process. To obtain sound $Al_2$$O_3$-X $O_2$sintered bodies, burning out and sintering process were carefully carried out. The sintered bodies showed continuous, fibrous monolithic microstructure without any swelling. Many microcracks were observed at the $Al_2$$O_3$-$ZrO_2$interfaces due to the mismatching of thermal expansion coefficient between $Al_2$$O_3$ and $ZrO_2$phase. Most of m- $ZrO_2$grains included twin defects such as (001), (010) and (011) type to accommodate the phase transformation induced stress.

• Elastomers and Composites
• /
• 제54권4호
• /
• pp.313-320
• /
• 2019

A typical wear pattern was reported to resemble the fatigue crack growth behavior considering its mechanism, especially for amorphous rubbers such as styrene-butadiene rubber (SBR). In this study, the wear and crack growth rates were correlated using two separate experiments for carbon black and silica-reinforced selected rubber compounds. The wear rate was determined using a blade-type abrasion tester, where the frictional energy input during wearing was measured. The crack propagation rate was determined under different tearing energy inputs using a home-made fatigue tester, with a pure-shear test specimen containing pre-cracks. The rates of abrasion and crack propagation were plotted on a log-log scale as a function of frictional and tearing energies, respectively. Reasonable agreement was observed, indicating that the major mechanism of the abrasion pattern involved repeated crack propagation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.99-99
• /
• 2010

Polymer nanocomposite has been attracting much attention as a new insulation material, since homogeneous dispersion of nm-sized inorganic fillers can improve various properties significantly. In this paper, various kinds of epoxy based nanocomposites were made and AC breakdown strength of Nano-TiO2 and micro-silica filler mixture of epoxy based composites were studied by sphere to sphere electrode. Moreover, nano- and micro-filler combinations were adopted as an approach toward practical application of nanocomposite insulation materials. Nano-TiO2 particle size is about 10nm and composites ratio was resin (100) : hardener (82) : accelerator (1.5). AC breakdown test was performed at room temperature (25 [$^{\circ}C$], 80 [$^{\circ}C$] and 100 [$^{\circ}C$] in the vicinity of Tg (90[$^{\circ}C$]). And thermal conductivity were measured by ASTM-D5470.

• Macromolecular Research
• /
• 제17권8호
• /
• pp.609-615
• /
• 2009

Two types of nano composite were obtained by in situ chemical method in polyaniline (PANI)/dodecyl-benzenesulfonic acid (DBSA) system depending on the use of either ammonium persulfate (APS) or ferric chloride ($FeCl_3$) as the oxidant. In order to study the difference of the two composites in the surface characteristics, thermal stability, and electric properties, the composite films were studied by transmission electron microscopy (TEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), and temperature dependent DC electrical conductivity. The results revealed a large difference in the surface morphology, thermal stability, and the microstructure properties between the two composites, and these differences were considered responsible for the molecular order and conductivity.

• Carbon letters
• /
• 제14권4호
• /
• pp.247-250
• /
• 2013

In this study, we present a facile method of fabricating graphene oxide (GO) films on the surface of polyimide (PI) via layer-by-layer (LBL) assembly of charged GO. The positively charged amino-phenyl functionalized GO (APGO) is alternatively complexed with the negatively charged GO through an electrostatic LBL assembly process. Furthermore, we investigated the water vapor transmission rate and oxygen transmission rate of the prepared (reduced GO $[rGO]/rAPGO)_{10}$ deposited PI film (rGO/rAPGO/PI) and pure PI film. The water vapor transmission rate of the GO and APGO-coated PI composite film was increased due to the intrinsically hydrophilic property of the charged composite films. However, the oxygen transmission rate was decreased from 220 to 78 $cm^3/m^2{\cdot}day{\cdot}atm$, due to the barrier effect of the graphene films on the PI surface. Since the proposed method allows for large-scale production of graphene films, it is considered to have potential for utilization in various applications.

• 마이크로전자및패키징학회지
• /
• 제25권4호
• /
• pp.95-99
• /
• 2018

최근 고집적 고출력 전자 패키지의 효율적인 열전달을 위한 기판 및 방열소재로서 절연성 고열전도 필름의 수요가 커지고 있어, 알루미나, 질화알루미늄, 질화보론, 탄소나노튜브 및 그래핀 등의 고열전도 필러소재를 사용한 고방열 복합소재에 대한 많은 연구가 이루어지고 있다. 그 중에서도 육방정 질화보론(h-BN) 나노시트가 절연성 고열전도 필러 소재로서 유력한 후보 물질로 선택되고 있다. 본 연구는 이 h-BN 나노시트와 PVA로 된 세라믹/폴리머 복합체 필름의 방열특성 향상에 관한 것이다. h-BN 나노시트는 h-BN 플레이크 원료 분말을 유기용매를 사용한 볼밀링과 초음파 처리에 의한 물리적 박리공정으로 만들었으며, 이를 사용한 h-BN/PVA 복합 필름을 제조한 결과 성형된 복합필름의 면방향과 두께방향 열전도도는 50 vol%의 필러함량에서 각각 $2.8W/m{\cdot}K$ 및 $10W/m{\cdot}K$의 높은 열전도도가 나타났다. 이 복합필름을 PVA의 유리전이온도 이상에서 일축 가압하여 h-BN 판상분말의 얼라인먼트를 향상시킴으로써 면방향 열전도도를 최대 $13.5W/m{\cdot}K$까지 증가시킬 수 있었다.