• 멤브레인
• /
• 제24권1호
• /
• pp.69-77
• /
• 2014

초저압용 나노여과 중공사 복합막을 제조하기 위하여 poly(vinylidene fluoride) (PVDF) 소수성 중공사막 표면에 무기염인 $K_2Cr_2OH$와 $KMnO_4$ 수용액으로 친수화 처리를 하였으며, 처리된 막 표면 위에 piperazine (PIP)과 trimesoyl chloride (TMC)로 계면 중합하여 복합막을 제조하였다. NaCl, $CaSO_4$, $MgCl_2$ 100 ppm 용액 및 300 ppm의 NaCl과 $CaSO_4$ 혼합용액을 이용하여 코팅물질의 농도, 코팅시간 및 건조시간에 따른 복합막의 투과특성을 알아보았다. 실험 결과 친수화 물질로는 $K_2Cr_2OH$을 사용하였을 때 더 높은 배제율을 보였으며, 친수화 시간이 길어질수록 투과도는 향상되고 배제율은 감소하는 경향을 나타내었다. 또한 촉매인 triethyl amine (TEA)과 sodium lauryl sulfate (SLS)의 농도가 높을수록 투과도는 감소하고, 염제거율은 증가하였다. 최적 조건으로는 $K_2Cr_2OH$으로 10분 동안 친수화 시킨 PVDF 중공사막 위에 PIP 2 wt% 용액(PIP 함량 대비 Triethyl amine (TEA) 7 wt%, SLS 20 wt% 혼합용액)과 TMC 0.1 wt%를 이용하여 계면중합한 것으로 공급액 NaCl 100 ppm에 대해서는 투과도 40 LMH, 제거율 50%이었고, $CaSO_4$ 100 ppm에 대해서는 투과도 48 LMH, 제거율 55%를 나타내었다.

• Transactions on Electrical and Electronic Materials
• /
• 제16권2호
• /
• pp.103-105
• /
• 2015

Effect of silicon doping into ZnSnO systems was investigated using solution process. Addition of silicon was used to suppress oxygen vacancy generation. The transfer characteristics of the device showed threshold voltage shift toward the positive direction with increasing Si content due to the high binding energy of silicon atoms with oxygen. As a result, the carrier concentration was decreased with increasing Si content.

• 한국재료학회지
• /
• 제21권2호
• /
• pp.89-94
• /
• 2011

In this work, fabrication and electrochemical analysis of an individual multi-walled carbon nanotube (MWNT) electrode are carried out to confirm the applicability of electrochemical sensing. The reactive ion etching (RIE) process is performed to obtain sensitive MWNT electrodes. In order to characterize the electrochemical properties, an individual MWNT is cut by RIE under oxygen atmosphere into two segments with a small gap: one segment is applied to the working electrode and the other is used as a counter electrode. Electrical contacts are provided by nanolithography to the two MWNT electrodes. Dopamine is specially selected as an analytical molecule for electrochemical detection using the MWNT electrode. Using a quasi-Ag/AgCl reference electrode, which was fabricated by us, the nanoelectrodes are subjected to cyclic voltammetry inside a $2{\mu}L$ droplet of dopamine solution. In the experiment, RIE power is found to be a more effective parameter to cut an individual MWNT and to generate "broken" open state, which shows good electrochemical performance, at the end of the MWNT segments. It is found that the pico-molar level concentration of analytical molecules can be determined by an MWNT electrode. We believe that the MWNT electrode fabricated and treated by RIE has the potential for use in high-sensitivity electrochemical measurement and that the proposed scheme can contribute to device miniaturization.

• 한국의류산업학회지
• /
• 제13권2호
• /
• pp.279-284
• /
• 2011

In this study, the process of preparation nonwoven with coated carbon nano fibers (CNFs) /poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) composite solution is described. The various contents of CNFs/PVDF-HFP composite coated nonwoven were prepared and characterized by morphological, mechanical, and electrical methods. Nonwovens are coated with CNFs/PVDF-HFP composite solution and decreased the pick up ratio with increasing CNFs contents in range from 0% to 16%. In the results of SEM images, it was clear that the CNFs were evenly distributed in coated nonwoven by SEM images, the existence of CNFs in coated nonwoven was confirmed regularly. The mechanical properties of various contents of CNFs/PVDF-HFP coated nonwoven were examined. The tensile linearity and compression linearity increased with increasing CNFs contents. The electrical properties of the CNFs/PVDF-HFP coated nonwoven increased with increasing CNFs contents.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.387-390
• /
• 2006

The protective layer of AC-PDP was fabricated by laminating an MgO green sheet. The MgO green sheet was made by coating MgO solution composed of solvent, dispersant, binder, and MgO nano-powder. The MgO solution was coated by the die casting method on the base film. We fabricated three kinds of MgO green sheets of which thicknesses were 20, 28, and $40\;{\mu}m$, respectively. The MgO nano-powder showed lower CL intensity and ${\gamma}i$ than the e-beam MgO. The MgO green sheet applied panels showed low luminance and current density. The efficiency was almost same as the conventional e-beam MgO panel.

• 한국표면공학회지
• /
• 제38권4호
• /
• pp.167-173
• /
• 2005

Surface characteristics of HA(hydroxyapatite) coated dental implant alloy by Sol-Gel method were investigated using potentiostat, ICP, SEM, EDX, EPMA and surface roughness tester. Surface roughness of HA coated specimen by Sol-Gel showed higher than that of PVD coated specimen. Corrosion resistance increased in the order of $1\%$ lactic acid, artificial saliva, $0.5\%$ HCI and $0.9\%$ NaCl solution. Amount of Ca element release was higher than that of V and P in the $0.5\%$ HCI and $0.9\%$ NaCl solution.

• 한국표면공학회지
• /
• 제44권4호
• /
• pp.137-143
• /
• 2011

The internal stress and magnetic properties (coercivity and squareness) of Ni-Fe nano thin film synthesized by electrodeposition method were studied as a function of acidic chloride bath conditions (composition and temperature) and current density. Fe deposition patterns were different depending on the temperature of the solution, the stress of film decreased with increasing the solution temperature, and the depending on the amount of Fe deposition showed a parabolic shape. The grain size of film was inversely proportional to stress of thin film. The internal stress of thin film and magnetic properties were deeply relevant, and the stress of thin film had a relationship with bath conditions and grain size of the thin film surface.

• 한국입자에어로졸학회지
• /
• 제11권3호
• /
• pp.77-85
• /
• 2015

A Belousov-Zhabotinsky reaction in a liquid-liquid system under microwave radiation was observed under non-stirring conditions. To control this non-equilibrium reaction, nano-particle, which is active under microwave irradiation, was added to the solution. Color changes of the solution during the oscillatory reaction were found to be influenced by the irradiation power although the droplet temperature was equal to the temperature of surrounding oil. During the irradiation, the period of oscillation became shorter because the reaction rate was faster. It could also be observed that there is possibility to eliminate oscillatory behaviors of the reaction using higher power of microwave. The possibility of controlling non-linear reaction using microwave was shown since microwave can easily travel through oil phase and reach water phase.

• 센서학회지
• /
• 제14권5호
• /
• pp.297-301
• /
• 2005

Nanocrystalline SnO and $SnO_{2}$ powder have been prepared by hydrazine method. Sn-Hydrazine complex was formed by the reduction between aqueous $SnCl_{2}$ solution and hydrazine monohydrate. $SnO_{2}$ nano powder was prepared by the decomposition of Sn-Hydrazine complex at $450^{\circ}C$. When NaOH was added to Sn-hydrazine complex, SnO powder with nano-sheet morphology could be prepared. This can be attributed to the role of $OH^{-}$ ion as a reducing agent.

• 한국재료학회지
• /
• 제17권10호
• /
• pp.544-547
• /
• 2007

Human teeth were scratched by the abrasive paper, dropping in hydroxyapatite solution during 1, 2, 3, 4 months. We studied teeth surface change with SEM each months. After 1 months treatment the surface appeared the change. Because of the hydroxyapatite ion exchange mechanism. The scratched surface was recovered by the hydroxyapatite. The results of EDS showed that $Ca^{2+}$ ion and $PO_4^{3-}$ ion were removed from hydroxyapatite solution to scratched teeth surface.