• Journal of Magnetics
• /
• 제19권1호
• /
• pp.59-63
• /
• 2014

Nano-sized nickel substituted cobalt ferrite powders, $Ni_xCo_{1-x}Fe_2O_4$ ($0.0{\leq}x{\leq}1.0$), were fabricated by the sol-gel method, and their crystallographic and magnetic properties were studied. All the ferrite powders showed a single spinel structure, and behaved ferrimagnetically. When the nickel substitution was increased, the lattice constants and the sizes of particles of the ferrite powders decreased. The M$\ddot{o}$ssbauer absorption spectra of $Ni_xCo_{1-x}Fe_2O_4$ ferrite powders could be fitted with two six-line subspectra, which were assigned to a tetrahedral A-site and octahedral B-sites of a typical spinel crystal structure. The increase in values of the magnetic hyperfine fields indicated that the superexchange interaction was stronger, with the increased nickel concentration in $Ni_xCo_{1-x}Fe_2O_4$. This could be explained using the cation distribution, which can be written as, $(Co_{0.28-0.28x}Fe_{0.72+0.28x})[Ni_xCo_{0.72-0.72x}Fe_{1.28-0.28x}]O_4$. The two values of the saturation magnetization and the coercivity decreased, as the rate of nickel substitution was increased. These decreases could be explained using the cation distribution, the magnetic moment, and the magneto crystalline anisotropy constant of the substituted ions.

• Carbon letters
• /
• 제22권
• /
• pp.48-59
• /
• 2017

This study synthesized pure anatase carbon doped $TiO_2$ photocatalysts supported on a stainless steel mesh using a sol-gel solution of 8% polyacrylonitrile (PAN)/dimethylformamide (DMF)/$TiCl_4$. The influence of the pyrolysis temperature and holding time on the morphological characteristics, particle sizes and surface area of the prepared catalyst was investigated. The prepared catalysts were characterized by several analytical methods: high resolution scanning electron microscopy (HRSEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), and X-ray photoelectron spectroscopy (XPS). The XRD patterns showed that the supported $TiO_2$ nanocrystals are typically anatase, polycrystalline and body-centered tetragonal in structure. The EDS and XPS results complemented one another and confirmed the presence of carbon species in or on the $TiO_2$ layer, and the XPS data suggested the substitution of titanium in $TiO_2$ by carbon. Instead of using calcination, PAN pyrolysis was used to control the carbon content, and the mesoporosity was tailored by the applied temperature. The supported $TiO_2$ nanocrystals prepared by pyrolysis at 300, 350, and $400^{\circ}C$ for 3 h on a stainless steel mesh were actual supported carbon doped $TiO_2$ nanocrystals. Thus, $PAN/DMF/TiCl_4$ offers a facile, robust sol-gel related route for preparing supported carbon doped $TiO_2$ nanocomposites.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 추계총회 및 학술대회 논문집
• /
• pp.131-133
• /
• 2012

The photoluminescence (PT) properties of Al-doped ZnO thin films grown by the sol-gel dip-coating method have been investigated. At 12 K, nine distinct PL peaks were observed at 2.037, 2.592, 2.832, 3.027, 3.177, 3.216, 3.260, 3.303, and 3.354 eV. The deep-level emissions (2.037, 2.592, 2.832, and 3.027 eV) were attributed to native defects. The near-band-edge (NBE) emission peaks at 3.354, 3.303, 3.260, 3.216, and 3.177 eV were attributed to the emission of the neutral-donor-bound excitons (D0X), two-electron satellite (TES), free-to-neutral-acceptors (e,A0), donor-acceptor pairs (DAP), and second-order longitudinal optical (2LO) phonon replicas of the TES (TES-2LO), respectively. According to Haynes' empirical rule, we calculated the energy of a free exciton (FX) to be 3.374 eV. The thermal activation energy for D0X in the nanocrystalline ZnO thin film was found to be ~25 meV, corresponding to the thermal dissociation energy required for D0X transitions.

• 한국결정성장학회지
• /
• 제29권6호
• /
• pp.352-358
• /
• 2019

최근 인쇄용지는 단순히 정보 전달의 기능을 넘어서 미적, 예술적 가치가 부가면서 고품질의 인쇄가 가능한 도공지(coated paper)에 대한 시장의 수요가 증가하고 있다. 특히 실사급 고품질의 인쇄가 가능한 잉크젯 프린팅의 도공지는 잉크의 인쇄적성을 향상시키기 위하여 표면에 젖음성(wettability)과 다공성 구조(porous structure)를 갖는 도공층의 역할이 매우 중요하다. 본 연구에서는 나노 실리카 졸 입자에 실란 커플링제로 표면처리하고 수용성 결합제인 폴리비닐알콜(PVA)와 혼합하여 도공액(coating color)를 제조하고 원지(base paper)에 코팅하여 도공층을 제조하였다. 실란 커플링제로 표면처리한 나노 실리카 도공층은 표면처리하지 않은 도공층과 비교하여 균일한 기공 분포 및 평탄한 표면 거칠기를 가지며, 판매용 고급 인화지와 유사한 광택도를 갖는 것을 확인하였다. 특히 잉크의 망점(dot)에 대한 진원도로 평가하는 인쇄적성 평가 결과 실란 커플링제로 표면처리한 도공지는 다층 구조의 도공층을 갖는 판매용 고급 인화지보다 더 우수한 결과를 얻을 수 있었다. 이러한 결과는 실란 커플링제 표면처리를 통하여 나노 실리카 입자의 분산성이 향상되어 우수한 젖음성과 균일한 기공 분포를 갖는 도공층 형성이 가능하였기 때문으로 확인되었다.

• 분석과학
• /
• 제21권3호
• /
• pp.237-243
• /
• 2008

착체중합법과 sol-gel법을 이용하여 ZnO 나노입자 표면상에 $TiO_2$ 입자를 코팅한 나노 코아쉘 구조를 제조하였다. 착체중합법으로 제조된 ZnO 입자는 평균입도가 약 100 nm, sol-gel법으로 제조된 $TiO_2$ 입자는 10 nm 이하의 크기로 각각 구성되었다. $ZnO@TiO_2$ 나노 코아쉘 구조의 평균입도는 약 150 nm의 크기를 나타내었다. 착체중합법으로 제조된 구형의 ZnO 나노 입자는 콜로이드상의 $TiO_2$ 입자의 균일한 표면흡착으로 인해 착체중합법으로 제조된 ZnO 입자의 입자간 응집이 크게 제어되었다. ZnO와 $TiO_2$의 이종 입자간의 표면전하는 pH 7 근처의 중성 영역에서 iso-electric point (IEP)의 차이로 인하여 - 로 대전된 $TiO_2$와 + 로 대전된 ZnO 나노입자의 이종의 입자들이 쿨롱의 인력에 의해 서로간의 결합을 하게 되고, 결합을 이룬 $ZnO@TiO_2$ 나노 코아쉘 구조가 표면 전하가 zero가 되어 발생하게 된다.

• Bulletin of the Korean Chemical Society
• /
• 제34권1호
• /
• pp.95-98
• /
• 2013

The photoluminescence (PT) properties of Al-doped ZnO thin films grown by the sol-gel dip-coating method have been investigated. At 12 K, nine distinct PL peaks were observed at 2.037, 2.592, 2.832, 3.027, 3.177, 3.216, 3.260, 3.303, and 3.354 eV. The deep-level emissions (2.037, 2.592, 2.832, and 3.027 eV) were attributed to native defects. The near-band-edge (NBE) emission peaks at 3.354, 3.303, 3.260, 3.216, and 3.177 eV were attributed to the emission of the neutral-donor-bound excitons ($D^0X$), two-electron satellite (TES), free-to-neutral-acceptors (e,$A^0$), donor-acceptor pairs (DAP), and second-order longitudinal optical (2LO) phonon replicas of the TES (TES-2LO), respectively. According to Haynes' empirical rule, we calculated the energy of a free exciton (FX) to be 3.374 eV. The thermal activation energy for $D^0X$ in the nanocrystalline ZnO thin film was found to be ~25 meV, corresponding to the thermal dissociation energy required for $D^0X$ transitions.

• 한국세라믹학회지
• /
• 제42권7호
• /
• pp.461-468
• /
• 2005

Transparent TiO$_{2}$ sols were prepared by hydrothermal synthesis to heat Ti precursor solutions, from Ti hydroxides obtained with neutralizing aqueous TiOCl$_{2}$ solutions having various concentrations of NaCI by aqueous NaOH solution, in the autoclave at 120$^{\circ}C$ The photocatalytic abilities of glass beads coated with the sol for gaseous benzene were evaluated. As a result, it was found that due to the increase of brookite phase in TiO$_{2}$ by controlling the concentration of Na ion the optical absorption of TiO$_{2}$ increases toward long wavelength but that in the area of short wavelength becomes relatively low and consequently the photocatalytic performance of TiO$_{2}$ thin film for benzene gas rather decreases, compared to that of composite film of anatase and brookite phases. These results suggest that in order for coated TiO$_{2}$ thin film to have high dissociation performance for benzene gas it is effective to form anatase and brookite phases compositely in TiO$_{2}$.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 추계총회 및 연구발표회 초록집
• /
• pp.86.2-86
• /
• 2003

• 공업화학
• /
• 제24권4호
• /
• pp.391-395
• /
• 2013

본 연구에서는 자외선 흡수 물질로 잘 알려진 zinc oxide (ZnO) 나노분말을 세 가지 합성조건에서 수열합성법으로 합성하였다. 또한, 분산성을 향상시키기 위하여 합성된 ZnO 나노분말의 표면을 다양한 실란계 계면활성제를 사용하여 표면 개질하였고, 표면개질된 ZnO 나노분말을 분산제로 72 h 동안 볼밀링하여 분산 졸 시료를 제조하였다. 30 nm 크기로 합성된 ZnO 나노분말을 3-chloropropyl trimethoxy silane로 표면개질하여 폴리우레탄계 분산제로 제조한 분산 졸 시료가 가장 높은 자외선 차단 특성 및 가시광 투과율을 가지면서 분산 안정성이 가장 우수하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제13권2호
• /
• pp.102-105
• /
• 2012

The structural, electrical, and optical properties of layer-by-layer ZnO nanoparticles deposited using sol-gel spin coating technique were studied and now presented. Thicknesses of the thin films were varied by increasing the number of deposited layers. As part of our characterization process, XRD and FE-SEM were used to characterize the structural properties, current-voltage measurements for the electrical properties, and UV-Vis spectra and photoluminescence spectra for the optical properties of the ZnO thin films. ZnO thin films with thicknesses ranging from 14.2 nm to 62.7 nm were used in this work. Film with thickness of 42.7 nm gave the lowest resistivity among all, $1.39{\times}10^{-2}{\Omega}{\cdot}cm$. Photoluminescence spectra showed two peaks which were in the UV emission centered at 380 nm, and visible emission centered at 590 nm. Optical transmittance spectra of the samples indicated that all films were transparent (>88%) in the visible-NIR range. The optical band gap energy was estimated to be 3.21~3.26 eV, with band gap increased with the thin film thickness.