• Current Photovoltaic Research
• /
• 제2권3호
• /
• pp.79-83
• /
• 2014

Dye-sensitized solar cells (DSSCs) are applied in the emerging fields of building integrated photovoltaic and electronics integrated photovoltaic like small portable power sources as demands are increased with characteristic advantages. Highly flexible dye-sensitized solar cells (DSSCs) prepared on single stainless steel mesh were proposed in this paper. Single mesh DSSCs structure utilizing the spraying the chopped glass paper on the surface treated stainless steel mesh for integrating the space element and the electrode components, counter electrode component and photoelectrode component were coated on each side of the single mesh. The fabricated single mesh DSSCs showed the energy-conversion efficiency 0.50% which show highly bendable ability. The new single mesh DSSCs may have potential applications as highly bendable solar cells to overcome the limitations of TCO-based DSSCs.

• 한국진공학회지
• /
• 제19권4호
• /
• pp.300-306
• /
• 2010

소수성 고분자를 사용하여 제작한 마이크로구조에 금 나노입자를 마스크로 이용하는 반응성이온식각(RIE: Reactive Ion Etching)을 적용하여 초소수성을 갖는 마이크로-나노 혼성구조를 제작하였다. 소수성 고분자로는 PFPE (perfluoropolyether bisurethane methacrylate)를 사용하였으며 마이크로 단일구조는 PDMS (polydimethylsiloxane) 몰드를 사용하는 스탬핑 방식으로 제작하였다. 다양한 형태로 제작한 PFPE 마이크로 단일구조와 마이크로-나노 혼성구조의 표면 접촉각을 측정하여 표면 미세구조에 따른 소수성의 변화를 관찰하였다. 마이크로 단일구조의 경우 접촉각은 안정적인 값을 보이지 못하였으나 단일 구조에 나노입자를 사용한 식각을 적용해 나노구조가 형성됨에 따라 $150^{\circ}$ 이상의 접촉각을 갖는 초소수성 표면이 매우 높은 재현성으로 용이하게 형성되었다.

• Transactions on Electrical and Electronic Materials
• /
• 제6권3호
• /
• pp.101-105
• /
• 2005

Electroluminescence(EL) and current-voltage(I-V) characteristics of hybrid EL devices containing Pr and Mn co-doped ZnS nanoparticles were investigated in this study. For the insertion of a hole transport layer of poly (N-vinyl carbazole)(PVK), the current level became lower due to the accumulation of electrons at the interface between PVK and nanoparticles. When both PVK and buffer layer $BaF_2$ were simultaneously introduced, the enhanced EL efficiency and improved I-V characteristics were obtained. This results from the additional increase of hole injection owing to the internal field induced by the significant accumulation of electrons at the interface. The presence of buffer layer $BaF_2$ together with PVK makes it possible the charge accumulation enough to induce the sufficient internal field for further hole injection.

• Applied Microscopy
• /
• 제45권3호
• /
• pp.155-169
• /
• 2015

Plastic deformation was introduced to the austenitic (${\gamma}$) stainless steel of SS304 by air blast shot peening, ultrasonic shot peening, and ultrasonic nanocrystalline surface modification. Various deformation structures were formed. The hardness, the deformation structure and the underlying grain refinement mechanism were investigated. In the deformed region, planar dislocation arrays and deformation twin (DT), the DT-DT intersection and ${\varepsilon}$-martensite structures, and ${\alpha}^{\prime}$-martensite were formed in the respective regions of low, medium, and high strain. The grain refinement mechanism is found to be closely related to the 1) sub-division of coarse grains by DT, shear bands and their intersection, and 2) formation of nano-sized ${\alpha}^{\prime}$-martensite due to the high plastic deformation.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.36-37
• /
• 2006

This study aims to investigate the usage of nano-scale particles in a micro metal injection molding ($\mu$-MIM) process. Nanoscale particle is effective to improve transcription and surface roughness in small structure. Moreover, the effects of hybrid micro/nano particles, Cu/Cu and SUS/Cu were investigated. Small dumbbell specimens were produced using various feedstocks prepared by changing binder content and fraction of nano-scale Cu particle (0.3 and $0.13{\mu}m$ in particle size). The effects of adding the fraction of nano-scale Cu powder on the melt viscosity of the feedstock, microstructure, density and tensile strength of sintered parts were discussed.

• 한국가시화정보학회지
• /
• 제8권4호
• /
• pp.31-37
• /
• 2010

In this study, a novel hybrid micro/nano PIV system combining defocusing and TIRFM technique has been developed for the multiscale flow measurement. With the developed system, both far and near field velocity fields have been measured simultaneously in a 2D straight microchannel and the particle trajectories were extracted by the nearest tracking algorithm. The shear rate values taken from experimental results have been estimated by comparing with the analytical solution of 2D Poiseuille flow and it is confirmed that the result shows good agreement with the theoretical value.

• 폴리머
• /
• 제37권2호
• /
• pp.127-134
• /
• 2013

혈관내피세포는 혈관 안쪽을 덮고 있는 편평한 세포층으로, 혈관의 기능과 혈관평활근세포의 증식을 조절한다. 폴리락타이드글리콜라이드 공중합체(PLGA)는 물성이 좋고 분해속도를 조절하기 좋은 생분해성 합성고분자이며, 여러 형태로 제조하기 쉽다. 누에에서 얻은 실크 피브로인은 18가지 아미노산으로 구성되어 있고 세포의 부착과 세포 기능 유지에 중요하며 화장품, 의료분야 등 다양한 분야에서 응용되고 있다. 본 연구에서는 용매 증발법을 이용하여 0, 10, 20, 40 및 80 wt%의 실크를 이용하여 실크/PLGA 하이브리드 필름을 만들었으며, MTT, SEM, ELISA, 면역세포화학염색법을 실시하였다. 실크/PLGA 하이브리드 필름에서 실크 함량에 따른 인간 대동맥 내피세포의 부착과 증식을 측정한 결과, 40 wt%의 실크/PLGA 하이브리드 필름에서 세포의 부착과 증식이 가장 높았으며, 이런 결과들은 실크가 세포의 증식에 좋은 영향을 미치고 실크/PLGA 하이브리드 필름의 표면이 인간 대동맥 내피세포의 성장에 알맞은 환경이라는 것을 확인할 수 있었다.

• 전기전자학회논문지
• /
• 제27권1호
• /
• pp.65-70
• /
• 2023

높은 캐리어 이동도, 큰 포화 속도, 낮은 고유 정전 용량, 유연성, 그리고 투명성을 장점으로 가진 CNTFET(Carbon NanoTube Field Effect Transistor) 10,000개 이상을 현존하는 반도체 디자인 절차와 공정 프로세서를 활용하여 하나의 반도체 칩에 집적하는데 성공하였다. 제작된 반도체 칩의 3차원 다층 구조와 다양한 CNTFET 생산 공정 연구는 기존 MOSFET과 CNTFET를 하나의 반도체 칩에 함께 사용하는 hybrid MOSFET-CNTFET 반도체 칩 제작에 대한 가능성을 보여주고 있다. 본 논문에서는 hybrid MOSFET-CNTFET을 활용한 6T binary SRAM을 디자인하는 방법에 대해 논하고자 한다. 기존 MOSFET SRAM 또는 CNTFET SRAM 디자인 방법을 활용하여 hybrid MOSFET-CNTFET SRAM을 디자인 하는 방법을 소개하고 그 성능을 기존 MOSFET SRAM 그리고 CNTFET SRAM과 비교하고자 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1328_1329
• /
• 2009

Nano porous indium tin oxide (ITO) powder was synthesized employing a new route sol-gel combustion hybrid method using Ketjen Black as a fuel. The nano porous ITO powder was composed of $SnCl_4$-98.0% and $In(NO_3)_3{\cdot}XH_2O$-99.999%, produce with a $NH_4OH$ with sol-gel method as a catalyst [1,2]. Crystal structures were examined by powder X-ray diffraction (XRD), and those results show shaper intensity peak at $25.6^{\circ}(2{\Theta})$ of $SnO_2$ by increased sintering temperature. A particle morphology as well as crystal size was investigated by scanning electron microscopy(FE-SEM), and the size of the nano porous powder was found to be in the range of 20~30nm. ITO films could controlled by nano porous powder at various sintering temperature in this paper[3,4]. The sol-gel combustion method was offered simple and effective route for the synthesis of nano porous ITO powder[5].

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제6권1호
• /
• pp.52-58
• /
• 2006

Single-electron transistor (SET)-based logic cells and SET/FET hybrid integrated circuits have been fabricated on SOI chips. The input-output voltage transfer characteristic of the SET-based complementary logic cell shows an inverting behavior where the output voltage gain is estimated to be about 1.2 at 4.2K. The SET/FET output driver, consisting of one SET and three FETs, yields a high voltage gain of 13 and power amplification with a wide-range output window for driving next circuit. Finally, the SET/FET literal gate for a multi-valued logic cell, comprising of an SET, an FET and a constant-current load, displays a periodic voltage output of high/low level multiple switching with a swing as high as 200mV. The multiple switching functionality of all the fabricated logic circuits could be enhanced by utilizing a side gate incorporated to each SET component to enable the phase control of Coulomb oscillations, which is one of the unique characteristics of the SET-based logic circuits.