• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.5
• /
• pp.527-534
• /
• 1997

Freezing of an aqueous sodium cWoride solution (Nacl- H20) saturating a packed bed with ini¬tial salt concentrations of 5, 10, 15(k by weight is investigated experimentally in a rectangular cav¬ity. The system was cooled from the top, bottom and a vertical side wall. For the freezing experi¬ments from below, there was little effect of the initial salt concentration throughout the freezing process, and the global freezing rate was not affected by the initial salt concentration. For the freezing from above, the size of the mush region decreased and the mushlliquid interface became flatter as the initial liquid concentration is decreased. For the freezing from vertical side wall, reheating of the mixture was intensified with an increase in the initial salt concentration. For Ci= 5%, supercooling was observed only at the early times of freezing process, but for Ci= 15% small supercooling was observed throughout the freezing process.

• Journal of Korean Society for Quality Management
• /
• v.17 no.2
• /
• pp.64-69
• /
• 1989

This paper aims at analyzing the process capability and at determining an optimal condition by experimental designs using the 2-way classification with repitition in order to maintain lower Nacl content and to refine both of a very small quantity of fatty acid and various magnetic ions in the glycerin to use ion exchange resin treatment process. An optimal condition of each level combination in both of passing temperature of cation exchange resin($A_1$, $A_2$, $A_3$) and of anion exchange resin($B_1$, $B_2$, $B_3$) is $A_3B_3$. The process capability index is improved from 0.63 to 1.40 and is interpreted as a desirable state. This analysis of process capability by experimental designs will contribute to improving productivity and quality of products.

• Journal of Nutrition and Health
• /
• v.23 no.1
• /
• pp.37-43
• /
• 1990

본 연구는 산업체 근로자의 Sodium섭취 실태를 파악하므로서 효율적인 식사관리와 건강관리의 기초자료를 얻고자 서울 시내 H타이어 공장에 근무하는 건강한 성인남자 40명을 대상으로 3일간의 식사분석과 뇨분석을 행한 것이다. 열량섭취는 1일 평균 3,185$\pm$813(mean$\pm$SD)kcal 였으며 영양소 섭취량은 당질이 541.8$\pm$144.5g, 단백질이 127.2$\pm$61.0g, 지방질이 56.8$\pm$42.7g이었고 총 열량의 68%, 16%, 16%를 차지했다. 식사분석에 의한 Sodium섭취량은 225.3$\pm$75.2mEq(13.2$\pm$4.4g Nacl)였으며 뇨중의 Sodium 배설량은 232.8$\pm$63.8mEq(13.7$\pm$3.5g NaCl)였다. 주요 음식의 1회 순섭취량에 대한 Sodium섭취는 국종류에서 가장 많았으며 1일 섭취하는 식사의 Sodium분포는 밥에서 6.9%, 국 35.7%, 반찬류 49.4%, 식탁에서 사용하는 조미료로서 5.1%, 간식에서 2.9%이었다. 당질섭취와 Sodium섭취, 단백질 섭취와 Sodium섭취 사이에는 강한 양의 상관을 보였다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.10a
• /
• pp.145-149
• /
• 1995

This study is to recognize the effect of silica-fume, fly-ash, and chemical proportion in mortar that have salt on the inside affect steel bar corrosion. water-binder ratio, 0.5, compounds, each of 10, 15, 20% by weight of cement, Nacl mixing weight, 0.5, 1.0, 2.0% by weight of binder, The speciment is sealed and cured for 28days, the corrosion area ratio and weight reduction ratio is measured after the accelerated corrosion test of 20 cycles. The conclusion shows that there is no suppression effect of steel bar corrosion of silica-fume, fly-ash, in case of having salt on the inside.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.09a
• /
• pp.446-449
• /
• 2004

High resolution geophysical imaging to delineate costal aquifer and seawater- freshwater interface has been applied in Baesu-eup, Yeonggwang-gun, Jeolla province Electrical resistivity information from vertical electrical sounding and 2-D electrical resistivity survey is key parameter to map equivalent Nacl concentration map over the survey area. Seismic velocity from refraction tomographic survey, on the other hand, gives more reliable information on the subsurface stratagraphy than electrical resistivity methods which frequently suffer from low resolution due to masking effect. We imaged high-resolution 3-D structure of costal aquifer by correlating the electrical resistivity with seismic velocity, and mapped equivalent NaCl concentration map using resistivity and hydro-geological information from well logging.

• Journal of Surface Science and Engineering
• /
• v.30 no.4
• /
• pp.239-247
• /
• 1997

The electrochemical machining of carbon steel was carried in various electrolytes which contain NACl and $NaCIO_3$. Though electrolyte containg NaCl yields fast machining rate, dimensional control is rather difficult. In the case of electrolyte with $NaCIO_3$, dimensional control of anode shape can be obtained through modification of cathode design. Mathematical modeling is also performed for these systems and agreements are good compared with experimental date. The constant gap experiment butween two electrode yielded faster machining rate than constant cathode moving rate experiment.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.04a
• /
• pp.663-668
• /
• 1997

In Korea, the temperature of winter seasons are really severe and cause lot's of snow-falling and iceing in the pavements. Several de-iceing mehtod have generally been adopted to melt the ice on the surface of pavement. Therefore, the Study of experimental in the first stage was given to the verification of the icers's effects. First, Contrete and asphalt pavement specimens were made and scattered with a CaC2-deicers. then 3cm and 5cm thickness of artificial snow were prepared on the surface of specimens. It reveals that the early calorification due to de- icers as high as the temperature of laboratory increases within about 10 minutes and last for more then 2 hours and the test of ice-formation on the surface of contrete and asphalt specimen due to snow leads to the similar rate of freezing time about 20 minutes. Second, three kinds of de-icers, such as CaC2 CaC2+Nacl, Cacl Flaket are rested in the snowy highway to check the iceing-resistance. The CaC2 is proved to be the most effective de-icers so far.

• Journal of Korea Foundry Society
• /
• v.25 no.3
• /
• pp.134-141
• /
• 2005

To overcome the undesirable deformation, peeling off and geometrical restrictions which were mainly caused by differences in thermal expansion coefficients during the cladding of aluminum strip and stainless strip, new processing method based on vacuum die casting is designed and implemented in fabricating Al/Fe-17wt%Cr steel(stainless steel). To increase cast-bonding ability, the surface of Fe-17wt%Cr steel is electrochemically etched to have optimum pit size and density. The optimum conditions to generate best pit are as follows: Solution: 1 M $Fecl_{3}$+1 M Nacl, Addition: $CuCl_{2}+HCl$, Current density: 80 $mA/cm^{2}$, Total current: 400 $coulomb/cm^{2}$, AC frequency :60 Hz.

• Journal of Surface Science and Engineering
• /
• v.26 no.5
• /
• pp.271-279
• /
• 1993

Experiments on electorchemical etching of aluminum foils with high cubic textures were carried out in this study. Etching behaviours and pit shapes with respect to various conditions of eletrochemical etching were in-vestigated. When HCl and NaCl solutions were used as electrolytes, the highest capacitanes were observed in solutions of 1MHCl and 5M NaCl. It was foundd that capacitance was improved by addition of H2SO4 to HCl so-lution which is considered to be due to the suppression of oxide film formation on the aluminum surface. The homogeneous distribution of each pits obtained in the HCl solution, while the degree of weight loss was lowest in the Nacl solution. The best etching properties in 1M HCl solution were obtained at the etching condi-tions of 0.15 A/$\textrm{cm}^2$, 150sec and$ 90^{\circ}C$.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.254-254
• /
• 2012

The purposed of this work was to determine surface charateristics of anodized Ti-30Nb-xTa alloys with Ta content. Samples were prepared by arc melting, followed by followed by homogenization for 12 hr at $1000^{\circ}C$ in argon atmosphere. The electrolyte for anodization treatment was prepared by mixing 465ml $H_2O$ with 35M $H_3PO_4$ and anodized at 180V to 220V. The microstructures of the alloys were examined by X-ray diffractometer (XRD) and optical microscopy (OM). Surface characteristics of anodized Ti-30Nb-xTa alloys was investigated by potentiodynamic test and potentiostatic in 0.9% Nacl solution at $36.5{\pm}1^{\circ}C$. It was observed that the changed ${\alpha}$ phase to ${\beta}$ phase with Ta content.