• 한국염색가공학회지
• /
• 제8권2호
• /
• pp.16-24
• /
• 1996

Polyester microfiber fabrics were alcoholysed at 120, 140, and 16$0^{\circ}C$ in 0.5, 1.0, and 1.5% of sodiumglycerolate/glycerol solutions(NaGR) up to 80% and the characteristic decomposition features were compared and discussed with the results of the hydrolysis done by 5% sodium hydroxide solution(NaOH) at 80, 90, and 10$0^{\circ}C$. The resulting activation thermodynamic parameters calculated by the combined use of the Arrhenius equation and the Eyring equation were in NaOH case ${\Delta}H^*$=- 13.89 kcal/mol, ${\Delta}S^*$/=-38.12 cal/mol K, and ${\Delta}G^*$=25.25 kcal/mol and in NaGR case ${\Delta}H^*$=29.81 kcal/mol, ${\Delta}S^*$=-2.29 cal/mol K and ${\Delta}G^*$=30.49 kcal/mol. Since in all cases NaGR-PET system has higher activation thermodynamic parameters, it was concluded that NaGR-PET reaction system is more favorable at high temperatures and occurs in a less selective fashion, in comparison to the NaOH-PET reaction system.

• Korean Chemical Engineering Research
• /
• 제51권3호
• /
• pp.308-312
• /
• 2013

NaOH 화학적 활성화법을 사용하여 야자각 차로부터 고 비표면적과 미세기공이 발달된 활성탄을 제조하였다. 활성탄제조 공정은 탄화과정에서 활성화 약품과 야자각 차의 비율과 불활성 기체 유량과 같은 실험변수들을 분석함으로서 수행되었다. 이와 같은 NaOH 화학적 활성화에 의한 2,481 $m^2/g$의 고 비표면적과 2.32 nm의 평균 기공크기를 갖는 활성탄이 얻어졌다. 양극으로 $LiMn_2O_4$, $LiCoO_2$와 음극으로 제조된 활성탄을 사용하여 하이브리드 커패시터의 전기화학적 성능을 조사하였다. $LiPF_6$, $TEABF_4$의 유기 전해질을 사용한 하이브리드 커패시터의 전기화학적 거동은 정전류 충방전, 순환 전류 전압법, 사이클과 누설전류 테스트에 의해 특성화 되었다. $LiMn_2O_4$/AC 전극을 사용한 하이브리드 커패시터가 다른 하이브리드 시스템 보다 더 좋은 충방전 성능을 보였으며, 출력밀도 1,448 W/kg와 131 Wh/kg의 고 에너지 밀도를 전달할 수 있다.

• 한국염색가공학회지
• /
• 제4권3호
• /
• pp.65-73
• /
• 1992

To control the hydrolysis rate of PET fabric with NaOH, HCl and $CH_3$COOH(HAc), as regulating reagent, were added to the 0.5 M NaOH solution. The concentrations of acids in 0.5 M NaOH were varied. PET fabrics were treated with aqueous solutions of acids in 0.5 M NaOH under different conditions. The weight loss of PET fabric, the rate of hydrolysis, the apparent activation energy (E$_{\alpha}$), the handle value, the etched surface of treated PET fabric, and the effect of salts such as NaCl, $CH_3$COONa(NaAc), and NH$_4$Cl on the weight loss were discussed. Acids in the aqueous 0.5 M NaOH solution decreased the weight loss of PET fabric bacause of neutralization of OH- and the weight loss of PET fabrics treated with corresponding concentration of aqueous NaOH solution to the concentrations of the aqueous solutions of acids in 0.5 M NaOH was lower than that of PET fabrics treated with aqueous solutions of acids in 0.5 M NaOH. The addition of NaCl to aqueous NaOH solution accelerated the reaction of OH- with PET greatly, the addition of NaAc increased the weight loss slightly, but the addition of NH$_4$Cl decreased the weight loss. It was thought that the very remarkable result that NaCl in aqueous NaOH solution promoted the hydrolysis of PET with NaOH would contribute to the conservation of energy and NaOH in the weight loss finishing process of PET fabric. The etched surface and the handle value of treated PET fabric were independent of the difference in the kinds of acids and salts added.nd salts added.

• Journal of Electrochemical Science and Technology
• /
• 제10권4호
• /
• pp.387-393
• /
• 2019

Activated carbons (ACs) are considered important electrode materials for supercapacitors because their large specific surface areas lead to high charging capacities. In the conventional synthesis of ACs, a substantial amount of carbon is lost during carbonization of a precursor. The development of a method to synthesize ACs in high yield would lower their manufacturing cost. Here, we demonstrate the synthesis of high-specific-surface-area NaOH-AC from carbon prepared via a hydrothermal carbonization (HTC) route, with a higher yield than that achieved through conventional pyrolysis carbonization. The amorphous carbon was derived from HTC of sugar and subsequently activated at 800℃ with various NaOH etchant/C ratios under a N₂ atmosphere. The AC prepared at 4:1 NaOH/C exhibited the highest surface area (as high as 2,918 ㎡ g^-1) and the highest specific capacitance (157 F g^-1 in 1 M aqueous Na₂SO₄ electrolyte solution) among the NaOH-AC samples prepared in this work. On the basis of their high specific capacitance, the NaOH-ACs prepared from HTC sugar are suitable for use as electrode materials for supercapacitors.

• 한국수소및신에너지학회논문집
• /
• 제33권4호
• /
• pp.343-352
• /
• 2022

Co/Al₂O₃ nanopowder was used as a catalyst to investigate the effect of catalyst support, reduction temperature, sodium borohydride (NaBH₄) concentration, sodium hydroxide (NaOH) concentration, and reaction temperature on the characteristics of NaBH₄ hydrolysis. The Co/Al₂O₃ nanopowder showed a high catalytic activity among various catalysts. Catalyst reduction at 250℃ exhibited a relatively good activity. The activity decreased with an increase in the NaBH₄ concentration. Conversely, the activity increased and then decreased with an increase in the NaOH concentration. Additionally, the activity increased with an increase in the reaction temperature. The value of apparent activation energy was 40.81 kJ/mol, which was lower than the other Co-based catalysts. Thus, Co/Al₂O₃ nanopowder catalyst can be widely used for NaBH₄ hydrolysis owing to its superior catalytic activity.

• 한국염색가공학회지
• /
• 제9권3호
• /
• pp.18-26
• /
• 1997

Polyester microfiber fabrics were decomposed at 100, 110, and 12$0^{\circ}C$ in saturated CaO/ethylene glycol solutions(CaO/EG), and the characteristics of decomposition kinetics were discussed in comparison to those by hot aqueous hydroxide solution(NaOH). The Arrhenius pre-exponential factor(A) was 9.17x $10^{14}$/M $sec^{-1}$and the activation energy($E_{a}$) was 8.19kcal/mol. While the A value was 1.947x $10^{14}$/M $sec^{-1}$ and the ($E_{a}$ value was about 15~19kcal/mol in NaOH-PET decomposition reaction. The much higher A value of the CaO/EG-PET decomposition reaction means that CaO/EG-PET decomposition reaction will occur in a less selective fashion in comparison to the NaOH-PET decomposition reaction. On the other hand, the lower ($E_{a}$) value of the CaO/EG-PET decomposition reaction than that of the NaOH-PET decomposition reaction means that CaO/EG-PET decomposition reaction is less sensitive on the variation of temperature than NaOH-PET decomposition reaction.

• 한국연초학회지
• /
• 제6권2호
• /
• pp.117-129
• /
• 1984

In this study, clinoptilolites were subjected to an array of experimental conditions, such as variations in heating temperature, reaction time, and molarity of acid and bass, and their responses measured. The activation levels were measured by adsorption indexes of toluene and ethyl alcohol and the X-ray spectra of clinoptilolites treated with acid and base. The effect of clinoptilolites on the menthol fuation was estimated by the amount of menthol produced after a given time of storage. The results were as follows: The optimum conditions for the clinoptilolites treatment were found to be IM HCI, IM NaOH, IMHCl-lM NaOH, and IM NaOH-lM HCl at $100^{\circ}C$ for 2 hours. 2. It was noted that clinoptilolites, untreated or treated with HCl, could not be used for the menthol fixation since the catalytic crating of menthol occurred with them. 3. The results from the residual menthol measurement in clinoptilolites after a specific period of storage showed that the best menthol fixation occurred in those treated with IM NaOH. 4. The menthol fuation by cigarettes with mentholated clinoptilolites was far better than that obtained by the use of mentholated tobacco column. 5. Most components in cigrettes smoke were generally reduced by the adsorption to clinoptilolites treated with IM NaOH.

• Carbon letters
• /
• 제8권1호
• /
• pp.30-36
• /
• 2007

Oxidized PAN (OXI-PAN) fibers were used for the precursors of activated carbon fiber in study. How drying temperature affected the properties of carbon fibers on activating process of carbon fibers was investigated. The specific surface areas of activated carbon fibers have been determined on a series of chemically activated carbons with KOH and NaOH. The experimental data showed variations in specific surface area, iodine and silver adsorptions by the activated carbon fibers. The amount of iodine adsorption increases with increasing specific surface areas in both activation methods. This was because the ionic radius of iodine was smaller than the interior micropore size of activated carbon fibers. Silver adsorbed well in NaOH activated carbon fibers rather than KOH activated carbon fibers in this study.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.303-304
• /
• 2023

In this study, the effects of NaOH and KOH alkali activators of various concentrations on the performance of alkali activated waste concrete powder (WCP) was discussed. The samples activated by alkaline solutions were cured for up to 28 days and then compressive strength test was performed. These samples were also characterized using various techniques to explore the phase evolution, and microstructural changes. Results showed superior performance of NaOH-activated WCP. Additionally, activation of WCP by 8M concentrated alkali solutions improved the strength, reactivity and microstructure of alkali activated WCP binder sample.

• 공업화학
• /
• 제28권6호
• /
• pp.663-669
• /
• 2017

활성화제로 KOH, NaOH 및 $ZnCl_2$를 사용하여 폐감귤박으로부터 활성탄을 제조하였다. 최적조건(활성화제의 침적비율 300%, 활성화 온도 : KOH의 경우 $900^{\circ}C$, NaOH의 경우 $700^{\circ}C$, $ZnCl_2$의 경우 $600^{\circ}C$, 활성화 시간 1.5 h)에서 제조한 활성탄을 각각 ACK, ACN 및 ACZ로 명명하였다. 이들 활성탄을 사용하여 회분식 반응기에서 아세톤, 벤젠 및 메틸메르캅탄(MM) 등의 3가지 대상가스에 대한 흡착 특성을 검토하였다. 이들 활성탄에 의한 3가지 대상 가스의 흡착은 Langmuir 모델식보다는 Freundlich 모델식에 더 부합되는 것으로 나타났다. 그리고 흡착 속도실험결과는 유사 1차 속도식보다는 유사 2차 속도식에 잘 부합하였으며, 입자 내 확산 모델 결과는 흡착 과정에서 외부물질전달과 입자확산이 동시에 일어나는 것을 시사해 주었다.