• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.2
• /
• pp.223-228
• /
• 2007

The Digital Frequency Synthesizer(DFS) that generates the wideband signal with high speed frequency hopping rate and high frequency resolution characteristics was designed and implemented in this paper The DFS was applied as local oscillator for direct frequency conversion IF modules of DVB-RCS, which directly generates the transmission immediate frequency signal by using DDS and wideband PLL technologies. The DDS technology provides high speed frequency hopping rate and high frequency resolution characteristics, which are also the DVB-RCS requirement. The wideband PLL technology also provides the wideband signal generation, which is a necessity for direct frequency conversion modules. The implemented DFS provides the spurious suppression characteristic of -50 dBc and less, frequency resolution of 0.233 Hz and frequency hopping rate of 125 ns, respectively. Also the DFS represents the amplitude flatness of 3 dB and less in the pass-band, and phase noise characteristic of -75 dBc/Hz at 1 kHz frequency offset.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.191-194
• /
• 2003

In IEEE 802.11b, Medium Access Control Sublayer consists of DCF (Distributed Coordination Function) and PCF (Point Coordination Function). DCF provides contention based services and PCF provides contention free services for QoS satisfaction. DCF uses CSMA/CA (Carrier Sense Multiple Access/Collision Avoidance) as an access protocol. And PCF uses Polling Scheme. In this paper, a modified New-PCF, which gives weights to channels with heavier traffic load, was suggested. NS-2 simulations were conducted to compare the service performances with original DCF, PCF and the modified New-PCF respectively. Simulation results has shown the increased overall throughput with the proposed New-PCF compared with other cases.

• ETRI Journal
• /
• v.33 no.6
• /
• pp.897-903
• /
• 2011

A hybrid ${\Delta}{\Sigma}$ modulator for audio applications is presented in this paper. The pulse generator for digital-to-analog converter alleviates the requirement of the external clock jitter and calibrates the coefficient variation due to a process shift and temperature changes. The input resistor network in the first integrator offers a gain control function in a dB-linear fashion. Also, careful chopper stabilization implementation using return-to-zero scheme in the first continuous-time integrator minimizes both the influence of flicker noise and inflow noise due to chopping. The chip is implemented in a 0.13 ${\mu}m$ CMOS technology (I/O devices) and occupies an active area of 0.37 $mm^2$. The ${\Delta}{\Sigma}$ modulator achieves a dynamic range (A-weighted) of 97.8 dB and a peak signal-to-noise-plus-distortion ratio of 90.0 dB over an audio bandwidth of 20 kHz with a 4.4 mW power consumption from 3.3 V. Also, the gain of the modulator is controlled from -9.5 dB to 8.5 dB, and the performance of the modulator is maintained up to 5 nsRMS external clock jitter.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.10
• /
• pp.67-72
• /
• 1994

In this paper we suggest a 32 bit high speed parallel multiplier which plays an important role in digital signal processing. We employ a bit-pair recoding Booth algoritham that gurantees n/2 partial product terms, which uniformly handles the signed-operand case. While partial product terms are generated, a special method is suggested to reduce time delay by employing 1's complement instead of 2's complement. Later when partial products are added, the additional 1 bit's are packed in a single partial product term and added to in the parallel counter. Then 16 partial product terms are reduced to two summands by using successive parallel counters. Final multiplication value is obtained by a BLC adder. When this multiplier is simulated under 0.8$\mu$CMOS standard cell we obtain 30ns multiplier speed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.9
• /
• pp.723-733
• /
• 2012

In wireless ad hoc networks, packet loss and latency are frequently occurred by movement of node. As the number of transmission hops increases in these networks, the throughput is increasingly deteriorated. In this paper, we design the wireless ad hoc network system based on IEEE 802.16j MMR (Mobile Multi-hop Relay), which improves the network performance. Our wireless ad hoc network system used adaptively the nearest BS and Farthest BS scheduling algorithms for efficient data transmission and chose the optimal path that minimize data loss and latency. In order to evaluate performance of the wireless ad hoc network system based on IEEE 802.16j MMR, we used the LWX (Light Wimax) model of NS-2 simulator. Through the simulation, we analyzed the network performance for various scenarios.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.11
• /
• pp.993-1003
• /
• 2012

In this paper, we propose a method that wireless mobile nodes can obtain high throughput in heterogeneous wireless networks using multiple connections and it has low packet loses under handover situation. Currently, a mobile node exchanges data with server for one network connection. The proposed method can use high throughput because it doesn't only use one network(WLAN, 3G, etc.) but also use multiple wireless networks. When mobile nodes move to area to use multiple connection, mobile nodes request heterogeneous wireless networks using multiple connections message from the server and the server transmit packets using multiple connections. Also, this method doesn't disconnect previous networks, so packets losses are decreased. Using the NS-2 simulation, we verify that the propose method enhances throughput.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.11B
• /
• pp.1269-1276
• /
• 2011

In the Proxy Mobile IPv6 (PMIPv6), the data transmission performance may be degraded when the two communicating hosts are located within the same mobile domain, since all the data packet shall be delivered by way of Local Mobility Anchor (LMA). In this paper we propose an extensional scheme of PMIPv6 using binding query. In the proposed Query-based PMIPv6 (Q-PMIPv6) scheme, the Mobile Access Gateway (NAG) of Correspondent Node (CN) sends a binding query to LMA to obtain the Proxy Care-of-Address of Mobile Node (MN). Since then, CN and MN can communicate with each other by using an optimized data path. For comparison, we performed the numerical analysis and the ns-2 simulations for the proposed Q-PMIPv6 scheme and the existing PMIPv6 and PMIPv6 Localized Routing (PMIPv6-LR). From the results, we can see that the proposed scheme outperforms the existing PMIPv6 and PMIPv6-LR schemes in terms of the signaling control and data delivery costs.

• Korean Journal of Optics and Photonics
• /
• v.19 no.5
• /
• pp.343-348
• /
• 2008

This study was carried out to commercialize FTTH by developing a burst mode optical receiver for E-PON. The optical receiver was manufactured by minimizing the capacitance of a photodiode to improve sensitivity for meeting 10, 20 km OLT Rx standard of E-PON at the transmission speed of 1.25 Gb/s. When bit-error ratio is $10^{-12}$ and PRBS is $2^5-1$, sensitivity is -26 dBm, loud/soft ratio is 23 dB. Both preamble time and guard time were set to 102.4 ns (128 bit). After comparing a photodiode whose capacitance is 0.53 pF with another photodiode whose capacitance has been minimized to 0.26 pF, we could see that sensitivity improved to 0.7 dBm and so did bandwidth to 190 MHz of burst mode for the optical receiver manufactured by the photodiode whose capacitance is 0.26 pF.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.9
• /
• pp.620-628
• /
• 2014

Various on-demand manner routing protocols have been proposed for efficient energy consumption in mobile ad-hoc networks. Some of the protocols tried to extend the network lifetime by periodically rerouting paths according to the energy consumption rate of nodes. However, those protocols suffer from frequent flooding and high overhead. This paper proposed a new routing protocol called ALPMR (Adaptive Local Path Modification Routing) that extends the network lifetime by using local path rerouting. The proposed ALPMR protocol performs local rerouting around nodes with little remaining energy as well as data congestion, thus reduces flooding and routing overhead and can extend the network lifetime. The performance of ALPMR protocol is observed using ns-2 simulator.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.7B
• /
• pp.745-759
• /
• 2011

In this paper, we propose the global handover mechanism that is able to provide the unlimited range of next-generation multimedia mobile services in an integrated environment. This mechanism consists of a multicast source based forwarding scheme and a global session management scheme. Global session management scheme provides LMA session information management, global mobility and route optimization. Multicast source based forwarding scheme delivers data between previously attached LMA and newly attached LMA without packet loss. In addition, this scheme removes the redundancy of buffered data. We present a performance evaluation and features analysis by the simulations using the ns-2. Global session management scheme has a less handover latency, propagation delay and signaling cost than the conventional methods. Multicast source based forwarding scheme can deliver buffer data without loss and it has less buffer size than conventional method.