• 한국연소학회:학술대회논문집
• /
• 2000.05a
• /
• pp.45-56
• /
• 2000

미분탄 연소시 발생하는 질소산화물(NOx)은 석탄의 형태 및 등급에 따라 다르게 나타난다. 석탄에 함유되어 있는 질소 성분은 준역청탄인 경우 촤보다 휘발분에 많이 분포되어 있으며, 역청탄인 경우 촤에 많이 분포되어 있음을 확인하였다. 석탄에 함유되어 있는 질소의 분포에 따라 연속과정에 의해 최대로 발생할수 있는 질소산화물의 양과 질소산화물로 전환되는 정도를 예측할 수 있었다. NOx 방출은 석탄중에 함유되어 있는 질소성분의 양에 영향을 받으며, 고온 노출 시 방출되는 휘발성분의 양의 증가 그리고 공기비를 감소함으로서 질소산화물의 저감율을 증가시킬 수 있었다. 특히 질소산화물의 환원은 연료가 풍부한 조건에서 연소초기 고온으로 연소하는 경우 효과적이었다. 또한 2단 연소에 의한 방법으로 1단에서는 저공기비로 유지하고 2단에서 추가적인 공기를 공급함으로서 최종 공기비는 1.2인 조건에서 효과적으로 NOx를 저감할 수 있었다.

• Journal of Internet of Things and Convergence
• /
• v.7 no.3
• /
• pp.75-80
• /
• 2021

Since the optimization of the diesel engine for the ship cannot satisfy the NOx emission limit by the method of reducing the NOx emission, it is necessary to reduce the NOx by post-processing the exhaust gas. In this study, we will review the feasibility of designing a binary nozzle and mixing chamber duct for effectively converting the number of elements into NH3 in the oil burner for the SCR catalyst unit integrated duct in the ship under development through the computational heat flow analysis for the velocity distribution and temperature distribution.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.696-701
• /
• 2018

The nitrogen oxides generated during combustion reactions have a great influence on the generation of acid rain and fine dust. As an NOx reduction method, exhaust gas recirculation combustion using Coanda nozzles capable of recirculating a large amount of exhaust gas with a small amount of air has recently been utilized. In this study, for the burner outlet with dual end opening, the use of a recirculation burner was investigated for the distribution of the pressure, streamline, temperature, combustion reaction rate and nitrogen oxides using computational fluid analysis. The gas mixed with the combustion air and the recirculated exhaust gas flow in the tangential direction of the circular cylinder burner, so that there is a region with low pressure in the vicinity of the fuel nozzle exit. As a result, a reverse flow is formed in the central portion of the burner near the center of the circular cylinder burner and the exhaust gas is discharged to the outside region of the circular cylinder burner. The combustion reaction occurs on the right side of the burner and the temperature and NOx distribution are relatively higher than those on the left side of the burner. It was found that the average NOx production decreased from an air flow ratio of 1.0 to 1.5. When the air flow ratio is 1.8, the NOx production increases abruptly. It is considered that the NOx production reaction increases exponentially with temperature when the air ratio is more than 1.5 and the NOx production reaction rate increases rapidly on the right-hand side of the burner.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1994.05a
• /
• pp.15-21
• /
• 1994

단계적 연료방식을 가지는 가스터빈 연소기의 해석을 위한 방법을 제안하였으며, 이를 바탕으로 연료배분방식에 따른 연소기의 연소 및 NOx 발생특성을 규명하였다. 연소기 해석모델은 연소기 내부를 선회기구역, 1차연소구역, 재순환구역, 2차연소구역 및 희석구역으로 나누어 각각의 반응구역을 혼합반응기, 플러그 유동반응기의 모델로서 근사하였다. 반응기내의 연소 및 NOx 생성반응은 천연가스 반응모델과 Zel'dovich 의 NOx 모델을 이용하여 예측하였다. 본 해석방법을 이용하여, 각 반응구역에 유입되는 연료량이 연소기내 연소특성, NOx 발생 특성 및 온도분포에 미치는 영향을 검토하였다. 또한, NOx 저감을 위해 증기분사를 사용하는 경우에 분사위치가 NOx 발생에 미치는 영향을 분석하여, 가스터빈 연소기설계에 필요한 기초자료를 제공하였다.

• Journal of the Korean Society of Combustion
• /
• v.4 no.2
• /
• pp.35-41
• /
• 1999

The purpose of this study is to establish the flame structure and NOx emission characteristics of the swirl flow coaxial diffusion combustion in the model gas turbine combustor. The mean temperature, ion currents and NOx emission measurement technique showed the effect of equivalence ratio into flame length and flame stability. As a result of this study, NOx emission was increased by increasing the equivalence ratio, and the peak value of the NOx was appeared near the flame front.

• 한국연소학회:학술대회논문집
• /
• 2013.06a
• /
• pp.111-112
• /
• 2013

An experimental study of a dual swirl burner was conducted to analyze NOx emission in the lean conditions. The dual swirl burner is composed of a combination of swirling jet premixed(main section) and diffusion flames(pilot section). It was operated with a co-swirling configuration and overall equivalence ratios between 0.6 and 0.8. The purpose of this study is to analyze experimentally the characterization of flame temperature and NOx concentration in reacting zone and to supply the useful experimental data for numerical simulations. The measurements of temperature and NOx concentration were captured using a thin digitally-compensated thermocouple and a sampling quartz probe with quenching effect of sudden expansion, and were measured by the NOx analyzer of chemiluminescence method. We could analyse the NOx emission characteristics comparing the temperature distributions in the lean equivalence ratios.

• Clean Technology
• /
• v.25 no.4
• /
• pp.324-330
• /
• 2019

The selective catalytic reduction system is a highly effective technique for the denitrification of the flue gases emitted from the industrial facilities. The distribution of mixing ratio between ammonia and nitrogen oxide at the inlet of the catalyst layers is important to the efficiency of the de-NOx process. In this study, computational analysis tools have been applied to improve the uniformity of NH₃/NO molar ratio by controlling the flow rate of the ammonia injection nozzles according to the distribution pattern of the nitrogen oxide in the inlet flue gas. The root mean square of NH₃/NO molar ratio was chosen as the optimization parameter while the design of experiment was used as the base of the optimization algorithm. As the inlet conditions, four (4) types of flow pattern were simulated; i.e. uniform, parabolic, upper-skewed, and random. The flow rate of the eight nozzles installed in the ammonia injection grid was adjusted to the inlet conditions. In order to solve the two-dimensional, steady, incompressible, and viscous flow fields, the commercial software ANSYS-FLUENT was used with the k-𝜖 turbulence model. The results showed that the improvement of the uniformity ranged between 9.58% and 80.0% according to the inlet flow pattern of the flue gas.

• Cement Symposium
• /
• no.29
• /
• pp.245-252
• /
• 2002

소성 영역(Sintering zone)에서 클링커(Clinker)의 형상 형성은 시멘트 생산 공정에서 가장 중요한 생산 공정중의 하나이다. 소성공정의 진단 및 최적 제어의 핵심은 써모그래프(Thermo graph), 즉 적외선 카메라를 이용한 온도 분포의 측정이다. 여기에서 다룰 ''PIT Indicator'' 시스템은 분진이 많은 열악한 산업 현장의 연소 시스템에 적용할 수 있도록 특별히 설계한 공냉식의 2개 채널을 가진 광학 장비에 기초하고 있다. 비디오 영상과 써모그래프 이미지 그리고 다양한 연소 특성이 카메라를 통하여 얻어지고 자기 학습 기능을 가진 소프트웨어에서 기록되고 분석된다. 이때 얻은 데이터는 수학적 모델에서 온라인으로 Free Lime 함유율을 예측하는데 이용된다. 열분포의 써모그래프 표시와 공정상의 다양한 운전 특성을 분석하여 주는 ''PIT Indicator'' 소프트웨어를 통하여 다른 공정 제어 시스템과 연결이 가능하다. 이와 같은 하드웨어와 소프트웨어를 이용하여 최적화가 필요한 여러요소들의 최적화를 동시에 그리고 온라인으로 수행할 수가 있다. Free Lime 함유율의 연속적인 온라인 연산을 통해 생산 설비 및 공정에 맞는 최소한의 에너지를 Kiln 에 공급함으로써 근본적으로 1차 연료의 절감이 가능하고 NOx와 같은 유해 가스의 배출량도 제어할 수 있다. 또한 별도로 NOx에 대한 모델을 개발하여 NOx를 정확하게 예측하는 것도 가능하다.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2006.04a
• /
• pp.410-411
• /
• 2006

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.8
• /
• pp.503-510
• /
• 2016

Incinerators generally emit pollutants such as NOx and CO during the combustion process. In this paper, pollutant emissions and temperature distributions were studied in a simulated incinerator with a reversed (relative to the flue gas flow) secondary air injection system. The experiments were performed by using a lab-scale furnace in order to evaluate the effects of the injection location, direction and flow rate of secondary air jets. The emission of NOx was lower in the case of reversed secondary air injection than in the case of cross injection, due to the recirculation and mixing of the exhaust gas. In the reversed air injection cases, thermal NOx emissions decreased as secondary air ratio increased from 30 to 60 and slightly increased at secondary air ratios higher than 60. In most cases, CO emissions were not detected except for a few reversed secondary air injection cases, in which cases CO concentrations below 2ppm were observed.