• 항공우주정책ㆍ법학회지
• /
• 제24권1호
• /
• pp.91-118
• /
• 2009

국내 저비용항공사인 제주항공과 한성항공은 국내 지역항공사로 운영 중에 있으며, 일부 노선에 있어서는 기존 항공사들과 동일한 노선에서 가격 차별화를 통하여 사업을 전개해 가고 있다. 제주항공과 한성항공의 노선은 현재 국내선 주요 노선에 한정하여 운영되고 있으며, 최근 근거리 국제선에 취항하기 위해 준비 중에 있다. 특히 운송비중이 높은 한중일 노선에 취항하기 위해 국제선 근거리 노선 취항을 희망하고 있어, 만일 지역항공사들의 국제선 취항이 가능해 질 경우 기존 항공사들의 운송네트워크에 큰 영향을 줄 것으로 예상된다. 또한 취항을 준비하고 있는 항공사들은 지역의 경제발전과 항공운송의 필요성에 따라 서둘러 지역의 항공사를 준비하고 있다. 이와 같이 국내 지역항공사들의 국내선 취항과 근거리 국제선 운항 및 취항준비의 성공 여부는 아직 판단하기 이르지만, KTX 도입과 기존 항공사의 국내선 축소 등 변화된 환경 하에서 지역항공사들의 네트워크 운영을 분석할 필요가 있다. 또한 많은 지역항공사들이 한중일의 국제선 취항을 앞두고 있고 이러한 성공 여부에 따라 필요한 장거리 노선도 점유하게 된다면, 기존 항공사와 지역항공사간의 차별화는 더욱 줄어들 것이며, 제3의 또는 제4의 거대 민항을 등장시키는 결과가 될 것이다. 본 연구는 이제 도입단계에 있는 국내 항공운 송시장에서의 지역 항공사의 노선 구조 및 시장 진입을 분석하여 지역의 저비용항공사 도입과 근거리 국제선 시장에서의 지역항공사 노선개발에 대하여 분석하였다. 특히 지역항공사들의 노선 개설을 위한 항공여행자들을 대상으로 한 수요자설문조사와 항공운송 서비스를 제공하는 공급자인 항공사와 여행사를 대상으로 한 전문가 조사를 수행하였다.

• 벤처창업연구
• /
• 제16권3호
• /
• pp.13-29
• /
• 2021

이 연구는 서울시 세대별(청년층, 중년층) 창업의 공간적 분포와 영향 요인을 분석하는데 목적이 있었다. 이를 위해 창업가의 연령대 자료를 포함하고 있는 서울시 사업체조사(2018) 데이터를 활용하여 서울시 424개 행정동의 세대별 창업 분포를 분석했으며, 산업, 인구구조 및 창업지원 기관 관련 변인이 포함된 연구모형을 설정하여 세대별 창업의 영향 요인을 분석하였다. 분석 방법은 서울시 행정동의 세대별 창업과 주요 변인들의 빈도, 평균 및 표준편차를 확인하기 위해 기술통계를 활용했으며, 전역적, 국지적 공간자기상관 분석을 통해 세대별 창업의 공간적 분포를 분석하였다. 특히 세대별 전체 창업과 주요 산업별 창업을 구분하여 분석함으로써 서울시 창업의 공간 분포를 심층적으로 확인하였다. 이후 라그랑주 검정을 통해 공간회귀분석 모형을 선택하였으며, 이를 바탕으로 세대별 창업에 미치는 지역적 영향 요인을 분석하였다. 연구결과를 통해 도출한 주요 결과는 다음과 같다. 첫째, 청년층과 중년층 창업의 공간적 분포에 유의미한 차이가 있었다. 청년층은 서초·강남-용산-마포-강서구로 이어지는 벨트 지역에서 창업이 활발하게 이루어졌지만, 중년층은 서초·강남·송파·강동으로 대표되는 동남권 지역의 창업이 활발한 편이었다. 둘째, 서울시 세대별 창업은 업종에 따라 다양한 공간적 분포를 보였다. 지식첨단산업(정보통신, 전문서비스)은 세대 공통적으로 서초, 강남, 마포, 구로, 금천구가 중심지역이었으며, 제조업은 기존 집적지를 중심으로 창업이 집중되어 있었다. 반면 생활서비스업의 경우 청년층은 용산, 마포, 관악 등 대학과 문화 중심지역에서 창업이 활발했으며, 중년층은 신시가지 중심으로 창업이 집중되었다. 셋째, 서울시의 세대별 창업 입지에 대한 영향 요인에 차이가 있었다. 청년층은 첨단산업, 대학, 문화자본 및 인구 밀집이 창업에 유의미한 영향 요인이었으며, 중년층은 전문서비스 특화도, 낮은 평균연령, 창업지원 기관 밀집 수준이 창업에 유의미한 영향을 미쳤다. 또한 이러한 입지요인은 산업별로 차별적인 영향이 있었다. 연구를 통해 제시한 제언은 다음과 같다. 첫째, 서울시 지역, 산업 및 세대별 특성을 고려한 체계적인 창업지원이 필요하다. 세대별 창업 지역과 산업에 상당한 차이가 있는 만큼 지역 및 산업적 특성을 고려한 맞춤형 창업지원 체계를 강화할 필요가 있다. 둘째, 연구 방법적 측면에서 데이터 축적을 통해 자치구 단위에서 문화, 재정 등을 종합적으로 고려한 후속 연구가 필요하다.

• 식물병연구
• /
• 제28권4호
• /
• pp.221-230
• /
• 2022

Erwinia amylovora에 의해 발생하는 화상병은 2015년에 국내에서 처음으로 보고된 이후 2021년 기준으로 전국 22개 지역으로 전파되었다. 우리나라는 식물방역법에 따라 화상병이 발생한 사과 및 배 과원은 발생주율을 기준으로 모든 기주식물들을 완전히 제거하여 구덩이에 매몰처리한다. 이후, 3년간 화상병균 전파를 막기 위해 매몰지 위에 기주식물 식재를 금하고 있다. 매몰처리법에 의한 화상병균 박멸 효과를 확인하기 위하여, 화상병 감수성 식물을 미끼식물로 이용하여 매몰지에 식재 후 화상병 재발 유무를 확인하였다. 이를 위해, 2019년부터 2021년에 매몰처리한 경기도 안성시와 충북 충주시 소재 매몰지 3곳을 선정하여 미끼식물 감시시설을 설치하였다. 화상병 감수성 식물인 사과(부사)를 미끼식물로 선정하고, 각 감시시설당 5주를 식재하였다. 감시시설은 울타리와 그물로 격리하였다. 또한, 실시간 모니터링을 위한 CCTV와 동작감지기, 그리고 현지 기상상황을 기록하는 센서를 설치하였다. 감시시설을 주기적으로 방문하여 육안으로 화상병 발병 유무를 확인하였다. 미끼식물로부터 화상병 의심 증상을 나타내는 표본을 채취하고 화상병균 특이적 프라이머를 이용하여 loop-mediated isothermal amplification polymerase chain reaction (PCR)과 conventional PCR을 통해 화상병균 감염 유무를 확인하였다. 그 결과, 현재까지 어떠한 미끼식물에서도 화상병균은 검출되지 않았다. 따라서, 현재 시행되고 있는 매몰 후 화상병 기주식물 3년 식재 금지 조항을 완화하는 근거로 본 연구 결과를 제시하고자 하며, 이를 통해 국내 과수산업과 농가의 피해를 최소화하는 데 기여할 수 있을 것이라 생각된다.

• 디자인학연구
• /
• 제19권1호
• /
• pp.253-262
• /
• 2006

20세기로 접어들면서 색채 연구는 호기심이나 미를 추구하는 대상에서 효과를 만드는 수단으로 소비 욕을 증폭시키며 발전하여왔다. 특히 컬러 방송이후 사람들은 컬러에 관심을 갖게 되어, 근래는 능동적인 결과의 표현으로서 디자인의 감성적 측면을 담당하는 중요한 역할로까지 확대되어 그 의미가 다양해지고 있다. 자동차 색채도 이러한 시대적 변화와 함께 발전되어 왔지만 1900년부터 1950년 반세기 동안은 세계대전과 경제성장의 과도기로 블랙이 주를 이루었으며, 이후 세계적 경제 고속화로 인해 자동차 생산이 늘어나면서 사람들에게 사용되는 상품 가운데 가장 고가품으로 성장하여 대량 생산을 위한 설비투자로 인해 기술적 평준화가 이루어졌다. 자동차 제조는 공정이 복잡하기 때문에 차체의 기계설비, 설계구성과 같은 하드부분을 변화시키기보다는 컬러, 소재와 같은 소프트 부분이 브랜드 아이덴티티를 발전적으로 변화시키는 용이한 방법이라는 인식이 자동차 제조사에 확산되면서 컬러 계획과 개발시스템이 다양한 각도로 세분화되었다. 세분화 경향 가운데 도료 기술과 도장 방법은 바디컬러에 영향을 주는 주요소로 다른 산업제품의 컬러 개발보다 기술적인 상관관계가 높다. 즉, 진보된 안료의 혼합으로 그동안 존재하지 않던 새로운 바디컬러가 등장하고 있으며, 이는 도장 구조와 도장 방법을 다변화시키는 요인으로서 바디컬러의 투명성과 깊이 감을 극대화하고 있기 때문이다. 이와 같이 향후는 기술적 요인과 상관관계가 높은 바디컬러의 증가가 예상되며, 자동차 수출지역의 확대로 글로벌경쟁에 대응하는 지역별 컬러 선호도 연구가 체계화되는 추세이다.보리고추장의 패키지로 한정하여 진행하였다. 본 논문은 조상의 문화와 전통이 쉼 쉬고 있는 농촌마을들을 개발 가능한 관광자원의 개념으로 파악, 연구 발전시켜 문화유산의 계승, 발전뿐만 아니라 농촌경제에 활력을 불어넣어 줄 수 있는 하나의 대안으로서의 방법론을 제시하고자 한다. 이러한 선행연구를 기반으로 유사의 여러 발전적 연구가 진행된다면 농촌경제의 활성화에 따른 국가의 균형발전에 이바지하리라 기대한다. 비례를 발견할 수 있었다. 실질적으로 연구결과를 활용하기 위해서는 모바일 정보기기에서 표시창외에 입력장치를 위한 공간을 추가로 확보해야 한다는 사실을 감안하여 디자인 작업에 적용해야 할 것이다.초투자율, 손실계수, 큐리온도 등)으로 미루어보아 각종 microwave 통신기기 core 및 고 투자율 deflection yoke core 등으로 사용이 가능하다.의 쐐기를 사용할 때 MU값이 크다. 결론: 수집된 광자선 빔 데이터를 분석하여 빔데이터의 정확성과 치료계획용 시스템의 계산 정확성을 대략적으로 점검 할 수 있는 기준 값을 제시하였다.동결이 요구되며 본 연구에서 이용된 OPS 동결 방법이 폭넓게 활용될 것으로 사료된다.며 이 때가 최상의 교배 적기로 사료되며, 혈장 progesterone농도가 4.0 ng/ml 이상으로 증가한 날(Bay 0)을 기준으로 하였을 때부터 CI는 혈장 estradiol-$17{\beta}$ peak 후 1일째인 최고치를 나타내었고, CI peak 후 1일째인 Day 0에 혈장 progesterone 농도가 최초로 4.0 ng/ml 이상으로 증가하여 CI가

• 한국도로학회논문집
• /
• 제8권4호
• /
• pp.49-62
• /
• 2006

우리나라는 그동안 사회기반시설로서 도로역할을 중시하여 도로부문에 매년 대규모 예산을 투입했다. 그 결과 개발이 용이한 평탄지를 중심으로 한 국가 기간 도로망 체계 확보에 결실이 있었다. 그러나 앞으로 지속적인 도로망 체계를 건설하기 위해서는 산악지형과 같은 고비용이 들어가는 지형에 대해서 효율적으로 개발해야 하는 과제를 안고 있다. 이러한 지형은 도로 설계속도 결정단계에서 고려되어야 할 중요한 입력변수이다. 그럼에도 불구하고 현재 도로설계기준상에는 지형구분을 위한 명확하고 객관적인 판단기준이 제시되어 있지 않기 때문에 설계속도가 부정확하게 결정될 수도 있다. 본 연구는 지형구분의 필요성에 대해 인지하고 고도 및 경사 그리고 주행속도 자료를 바탕으로 합리적으로 지형구분을 하였으며, 연구결과는 다음과 같다. 첫째, 본 연구에서는 GIS data를 이용하여 고도와 경사도에 따라 지형을 9가지 AREA로 분류하였으며, 지형분류 data(AREA)와 주행속도 자료를 matching하여 분석한 결과, AREA의 분류에 따른 특성이 주행속도에 영향을 미치는 것으로 나타났다. 둘째, 본 연구에서는 고도와 경사도에 따른 지형분류와 지형분류에 따른 그룹 간 주행속도의 유의성 분석 결과를 근거로 해서 평지, 구릉지, 산지로 우리나라 지형을 구분하였다. 본 연구는 일반국도를 대상으로 한 주행 속도자료를 이용하였기 때문에 지방도나 군도등 기능이 다른 도로에 대해서는 적용상의 한계가 있으나, 향후 도로건설시 도로가 통과하는 지역의 지형적 특성을 반영 할 수 있는 하나의 기준이 될 것으로 기대된다.트 탄성계수나 슬래브 두께가 증가하던지 또는 지반 탄성계수가 감소하면 최대 응력이 생기는 종방향 상 위치가 양쪽 바깥축에서 중간축의 위치로 바뀌게 된다. 문합군(52%)에 비해 통계적으로 유의한 차이를 보였다(p<0.01). 결론: 식도-위 문합 시 경부 문합은 흉부 문합에 비해 문합부 협착의 빈도는 차이가 없고, 역류성 식도염의 빈도는 현저히 적으며, 식도암의 경우 더 여유 있는 절제면을 제공할 수 있는 장점이 있으리라 판단된다. 따라서 식도절제술 및 위-식도 문합 시 특별한 금기증에 해당하지 않는다면 경부 문합을 선호할 수 있을 것으로 생각된다. 문합 방법에 따른 역류성 식도염과 협착의 빈도에서는 유의한 차이를 발견할 수 없었으나, 수술 시간의 단축 등의 몇몇 장점으로 인해 기계 문합을 선호할 수 있을 것으로 생각된다. 향후 식도암의 수술 기법과 술 후 관리의 향상으로 인하여 문합 부위의 역류로 인한 증상과 환자의 일상 생활의 질에 대한 중요성이 지속적으로 강조될 것으로 생각되며, 이에 따른 적극적인 anti-reflux 수술에 대한 고려도 필요할 것으로 생각된다.$14.7{\pm}2.7$ mL로 각 군 간에 통계적인 유의성이 있었다(p<0.05). 혈청내 칼륨 농도는 I군에서 II군에 비해 소생술 후 의의 있게 높았으며(p<0.05), 포도당 농도는 II단계의 I군에서 타군과 비교하여 현저히 낮았다(p<0.05). IL-8은 I 군 $1,834{\pm}437$ pg/mL, II 군 $1,006{\pm}532$ pg/mL,

• 한국수자원학회논문집
• /
• 제56권4호
• /
• pp.261-272
• /
• 2023

최근 급격한 도시화와 기후변화에 따라 재난에 의한 피해가 증가하고 있다. 국내 기상청에서는 표준 경보(주의보, 경보)를 전국적으로 통일된 표준 경보 기준(3시간 및 12시간 최대 누적강우량)에 따라 발령하여 재해에 따른 지역별, 재난 사상별 특성이 고려되지 않은 문제점이 있다. 따라서 본 연구에서는 서울특별시, 인천광역시, 경기도의 호우·태풍에 대한 재해 피해액 및 누적강우량을 활용하여 대상지역별 재해강도에 따른 단계별 기준을 설정하고, 강우에 따라 발생할 수 있는 재해의 강도를 분류하는 모형을 개발하고자 하였다. 즉, 본 연구에서는 호우·태풍에 의한 재해 피해액 누적 분포 함수의 분위별로 재해강도의 범주(관심, 주의, 경계, 심각 단계)를 분류하였고, 재해강도의 범주에 따른 누적강우량 기준을 대상 지자체별로 제시하였다. 그리고 지자체별 재해강도 분류모형 개발을 위해 4가지(의사결정나무, 서포트 벡터 머신, 랜덤 포레스트, XGBoost)의 머신러닝 모형을 활용하였는데 강우량, 누적강우량, 지속시간 최대 강우량(3시간, 12시간), 선행강우량을 독립변수로 이용하여 종속변수인 지자체별 재해강도를 분류하였다. 각 모형별 F1 점수를 이용한 정확도 평가 결과, 의사결정나무의 F1 점수가 0.56으로 가장 우수한 정확도를 보였다. 본 연구에서 제시한 머신러닝 기반 재해강도 분류모형을 활용하면 호우·태풍에 의한 재해에 대한 지자체별 위험 상태를 단계별로 파악할 수 있어, 재난 담당자들의 신속한 의사결정을 위한 기초 자료로 활용될 수 있을 것으로 판단된다.

• 마케팅과학연구
• /
• 제19권4호
• /
• pp.1-10
• /
• 2009

本研究的目的是对咖啡店的 "重要性"（顾客在光顾咖啡店以前的感知）和积极或消极的 "满意度"（顾客在光顾咖啡店以后的感受）之间的差距进行分类, 并分析这些差距对对购买行为的影响. 为此, 我使用重要性和满意度之间的差距作为选择咖啡店的解释变量, 并通过使用有序Probit模型（OPM）来实证分析差距对购买行为（整体满意度和愿意到再次光顾）的影响方向和大小. 先前使用IPA的研究评估了差距影响的方向和大小的象限, 但是在分析差距对顾客的影响方面却失败了. 在本研究中, 我评估了积极和消极的差距对顾客满意度和愿意去再光顾的影响. 通过使用OPM,我量化了积极和消极的差距对顾客整体满意度和愿意去再光顾的影响. 每个人的支出, 光顾的频率和购买咖啡的地方对顾客整体满意度有最积极的影响. 光顾的频率, 在每人的支出之后, 然后是购买咖啡的地方对顾客整体满意度有最积极的影响. 因此每个人的支出和光顾的频率对顾客整体满意度有最积极的影响. 这一发现意味着一个在咖啡店每次或每周花费5000韩元的顾客的实际的满意度越高（差距), 其整体满意度和愿意去再光顾就越高. 虽然经济效益对总体满意度和愿意去再光顾有显著影响, 但是大专和大学的学生仍然愿意去咖啡馆并愿意消费5000韩元, 因为他们不只是购买咖啡本身而且将咖啡店作为其他活动的场所, 例如工作, 和朋友见面或是放松的地方. 学院和大学的学生还可以在咖啡店通过个人电脑上网, 看电影, 学习, 因此, 咖啡馆应对顾客提供适当的设施和服务. 咖啡店品牌的积极差距对愿意去再光顾有积极的影响表明顾客满意度越高, 顾客越愿意去再光顾. 另一方面, 这一因素的消极差距意味着顾客满意度越低, 顾客再光顾的意愿也越低. 因此, 在本研究中, 与其他评估的因素相比, 品牌因素对满意度有较大的影响. 鉴于国内咖啡文化变得越来越高级, 大专院校的学生对这一趋势也很敏感, 所以学生有很多可选择的品牌. 在韩国最高级的咖啡店, 外墙是玻璃建造的并可以打开, 内部是充满异国情调的开放式厨房. 这些高级咖啡店作为标志的功能复合大专院校学生的品味. 韩国咖啡店已成为一个文化品牌. 从品牌因素来看, 为了让顾客觉得这些咖啡店是高级的, 高质量的设备和提供更好服务的措施应当建立起来. 韩国咖啡馆作为蓬勃发展的行业品牌竞争加剧的结果表明, 提供与竞争对手不同的额外服务是有必要的. 顾客可以免费使用扫描仪. 另一个可以用来提高品牌的战略是提供和经营为集体学习而准备的讨论会议室. 如果咖啡馆采取这些类型的策略, 学院/大学的学生将更有可能认为他们承担的费用是值得的, 随后, 他们将可能更满足这些咖啡馆的品牌, 并更愿意再次光顾. 性别和学习年数对总体满意度和再光顾的意愿有最消极的营销. 女学生比男学生更容易满足和再光顾. 三, 四年级的学生比一, 二年级的学生更容易满足和再光顾. 喝咖啡的学生, 单独在咖啡店看书, 用笔记本电脑是很容易被注意到的. 高年级学生为了有效地利用时间用于自我发展和寻找工作往往独自光顾咖啡店. 从积极的差距来看, 经济效率这一因素对总体满意度和愿意再光顾有最大的影响. 与咖啡价格一起, 学生实际满意度（差距）越高, 总体满意度和再光顾的意愿也越高. 有消极差距的经济效率队再光顾有消极营销的结果表明较小的消极差距可以让再光顾的意愿更高. 在持续恶化的市场环境中, 坐落在大专院校附近的咖啡店采取诸如积分或会员卡, 和信用卡 公司的战略联盟, 发展套餐菜单或季节菜单和免费咖啡服务这些战略来提高竞争力. 就消极差距而言产品功率也有消极的影响, 这表明较高的负差距会导致较低的再光顾的意愿. 因为还有更多的客户比前几十年, 在这十年里更喜欢咖啡, 新一代的客户, 即学院/大学的学生, 希望除了咖啡还有更重菜单项目. 因此, 咖啡店应当增加配菜项目, 如华夫饼, 糕, 蛋糕, 三明治和沙拉. 例如, 星巴克韩国正在努力加强卖草莓糕, 艾草香味, 南瓜产品, 并提供免费的咖啡或奶油. 总而言之, 咖啡馆应注重提高其经济效率, 品牌和产品功率, 以加强大专院校学生的满意度. 由于店铺毗邻学大专院校可享受地缘优势, 就经济效率, 品牌和产品功率而言提供不同的服务, 很可能会提高客户满意度和回访. 咖啡厅的品牌, 因此, 应不断创新和变化, 以满足顾客的愿望. 由于这项研究只是针对在首尔的大专院校的学生, 需要针对不同地区和年龄组的比较研究来概括本研究的结果和建议.

• 한국작물학회지
• /
• 제56권4호
• /
• pp.404-412
• /
• 2011

2006~2007년까지 2개년에 걸쳐 전국 8개도 27개 지역 28개 시험구에서 재배한 시료를 바탕으로 등숙기 온도가 벼의 등숙형질에 미치는 영향을 분석하고 식미치 향상에 적합한 등숙온도를 추적한 결과는 다음과 같다. 1. 출수기~출수 후 30일까지의 평균기온이 출수 후 40일까지의 평균기온 보다 벼의 등숙정도를 나타내는 현미 천립중과 식미치 변이를 더 잘 설명할 수 있었다. 2. 시험에 사용된 중만생종 벼 품종들은 출수기~출수 후 30일까지의 평균기온이 $21^{\circ}C$ 이하일 경우에는 저온으로 등숙이 불량하였고 $22^{\circ}C$ 전후에서 현미천립중이 최고를 나타내었으며 그 이상의 온도에서는 온도가 올라갈수록 현미천립중이 감소하였다. 3. 현미천립중이 최대가 되는 출수기~출수 후 30일까지 평균기온은 $22.2^{\circ}C$, 식미치가 가장 높았던 평균기온도 $22.2^{\circ}C$로 같은 경향을 나타내었다. 4. 출수기~출수 후 30일까지 평균기온이 증가할수록 현미단백질 함량은 증가하였고 현미천립중이 증가할수록 현미단백질 함량은 감소하였으며, 현미천립중이 증가하면 식미치가 증가하였고 현미단백질이 증가하면 식미치가 감소하였다. 5. 식미치가 최고를 나타내는 출수기~출수 후 30일까지의 평균기온은 남평벼에서 $22.1^{\circ}C$, 일품벼와 주남벼에서는 $22.5^{\circ}C$였지만 동진1호는 $23.1^{\circ}C$로 다소 높았다. 6. 출수기~출수 후 30일까지 평균기온이 $21^{\circ}C$ 이상인 경우 온도가 높아질수록 현미단백질 함량은 유의하게 증가하였고, 현미천립중과 현미단백질 함량과의 관계는 부의 유의성을 나타내었다. 7. 식미치는 현미천립중과 정의 유의성을 보였고 현미단백질 함량과는 부의 유의성을 나타내었다.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.