• 한국CDE학회논문집
• /
• 제9권2호
• /
• pp.102-111
• /
• 2004

In this paper, the efficient layout method for generating common and continuous cutting path of flat-bar profile. The ‘flat -bar’ is a stiffener and has long rectangular shape. This paper describes a fast nesting algorithm of the flat-bar, and a procedure to generate cutting path of gas/plasma torch, which is operated by a NC (numerically controlled) gas/plasma cutting machine. By using this common and continuous path, the machining-time for cutting and the maintenance-cost of plasma-torch could be reduced. Proposed procedures are written in C-language and applied to the Interactive Flat-Bar-Nesting System executable on Open VMS with X-Window system.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2011년도 특별논문집
• /
• pp.101-105
• /
• 2011

In most shipbuilding company, cutting procedure is proceed by cutting machine which run by CNC(Computer Numerical Code) data. In our cutting process, all CNC data is created by our nesting post processor system automatically. Among them, in case that cutting piece in the remnant plate, our system creates only one piece CNC data. Because remnant plate is not typical shape, and ship designers don't know remnant plate shape and quantity. In can happen some merit and good point if we modify 1:1 piece NC data by shorten cutting path, reducing cutting time or re-arrangement piece. For modifying cutting data, outside workers have to call to ship designer or have to go to NC control room where control the CNC system and cutting machine. It makes stop work process, and it waste time. In this paper, we introduce a program that can modify and replace 1:1 NC data with continuous or common NC data automatically.

• Kyungpook Mathematical Journal
• /
• 제31권2호
• /
• pp.275-287
• /
• 1991

• 대한한방내과학회지
• /
• 제29권3호
• /
• pp.730-741
• /
• 2008

Objective : To examine the efficacy of CY, the improvement of atopy dermatitis(AD)-like lesions on the rostral back of the NC/Nga mice, which took CY orally and were treated with a chemical substance called DNFB, the inhibition of ear swelling, and the inhibition of inflammatory response of the ear tissue of the mice were observed and compared, and the inhibition of the serum IgE count and the IL-4 and IFN-${\gamma}$ count produced by CD4+ T cells of the lymph node were observed and compared. Materials and Methods : For measurement of ear thicknesses, 0.15% DNFB $25{\mu}l$ mixed with acetone/olive oil(3:1) was applied to the right ear and dorsal skin of the NC/Nga mice 5 times at an interval of 7 days. Ear thickness was measured every day over a five-week period after the first application of DNFB. The total serum IgE count was measured with ELISA by taking blood samples 24 hours after the fifth application of DNFB. To measure the IL-4 and IFN-${\gamma}$ count, the lymph node was cut off, and the CD4+ T cells were purified and stimulated to activate the T cells, and then the IL-4 and IFN-${\gamma}$ count was measured with ELISA. Results : Continuous oral administration of CY improved the AD-like skin lesions on the rostral back and inhibited the ear swelling in NC/Nga mice treated with DNFB and inhibited the inflammatory response in the NC/Nga mice treated with DNFB NC/Nga mice. Continuous oral administration of CY did not significantly inhibit the serum IgE count and failed to significantly reduce the IL-4 count generated after TCR stimulation in the CD4+ T cells of the NC/Nga mice treated with DNFB. Continuous oral administration of CY significantly reduced the IFN-${\gamma}$ count generated after TCR stimulation in the CD4+ T cells of the NC/Nga mice treated with DNFB.

• 한국토양비료학회지
• /
• 제49권6호
• /
• pp.819-825
• /
• 2016

Monitoring of soil fertility and crop productivity in long-term application of silicate fertilizers is necessary to use fertilizers efficiently. This study was conducted to investigate effects of continuous application of silicate fertilizer for rice cultivation from 1969 to 2014. The treatments were no silicate fertilizer treatments (N, NC, NPK, and NPKC) and silicate fertilizer treatments (N+S, NC+S, NPK+S, and NPKC+S). The 46-yr input of $2\;ton\;ha^{-1}yr^{-1}$ of silicate fertilizer increased pH 0.6 ~ 1.1 and exchangeable Ca $2.0{\sim}2.4cmol_c\;kg^{-1}$ in silicate fertilizer treatments (N+S, NC+S, NPK+S, and NPKC+S) compared with no silicate fertilizer treatments (N, NC, NPK, and NPKC) because silicate fertilizer included Ca component. Also, available silicate concentrations of silicate fertilizer treatments (N+S, NC+S, NPK+S, and NPKC+S) increased $169mg\;kg^{-1}$ compared to no silicate fertilizer treatments. In Period II ('90~'14), the mean annual Si field balance varied from 62 to $175kg\;ha^{-1}yr^{-1}$ in silicate fertilizer treatments, indicating continuous accumulation of soil Si. Silicon uptake and grain yield of rice had greater differences between N treatment and N+S treatment than other treatments. This showed that the application of silicate fertilizer had greater effect in nutrient-poor soils than in proper nutrient soils. Thus the application of silicate fertilizer led to improvement the fertility of soil and increasement of rice production for the lack of soil nutrients.

• 한국융합학회논문지
• /
• 제7권1호
• /
• pp.17-23
• /
• 2016

본 논문에서는 제조업체의 공장자동화 환경을 클라우드 컴퓨팅의 SaaS 구축기술을 활용하여 전용 NC포스트프로세서를 웹 환경에서 서비스 받을 수 있도록 융합기술을 적용한 사례를 기술하였다. 개발된 WPS시스템은 기존 소프트웨어 개발방법론인 SPLE을 보완한 SCoD 방법론을 활용하여 안정되고 지속적인 시스템 서비스를 제공하도록 구현하였다. WPS는 범용의 NC포스트프로세서를 사용자 인터페이스와 프로세서 엔진으로 분리하여 각각의 사용자 PC와 클라우드 팜에 설치하고, 이 두 모듈을 네트워크로 연결하는 구조로 설계하였다. WPS는 철판절단 및 금형생산 공정 등에 활용할 수 있도록 현업에서 기능상의 테스트를 완료하였고, 사용자의 편의성을 개선하고 과금을 위한 모듈을 추가하는 등의 보완 작업을 거쳐 상용 서비스를 진행 중에 있다.

• 한국CDE학회논문집
• /
• 제9권2호
• /
• pp.158-163
• /
• 2004

Curve tessellation, which generates a sequence of points from a curve, is very important for curve rendering on a computer screen and for NC machining. For the most case the sequence of discrete points is used rather than a continuous curve. This paper deals with a method of tessellation by calculating the maximal deviation of a curve. The maximal deviation condition is introduced to find the point with the maximal deviation. Our approach has two merits. One is that it guarantees satisfaction of a given tolerance, and the other is that it can be applied in not only a polynomial curve but its offset. Especially the point sequence generated from an original curve can cause over-cutting in NC machining. This problem can be solved by using the point sequence generated from the offset curve. The proposed method can be applied for high-accuracy curve tessellation and NC tool-path generation.

• 한국전산응용수학회:학술대회논문집
• /
• 한국전산응용수학회 2003년도 KSCAM 학술발표회 프로그램 및 초록집
• /
• pp.3.2-3
• /
• 2003

We propose a method of surface extension method using several functions. Interpolation theory is well developed in curve and surface. But extrapolation theory is not well developed because it is not unique outside the useful domain. It requires continuous, first derivative, second derivative continuous extension for matching in NC(Numerical Control) machine. In the past, we generate data outside the useful area and refit those data using least squares method. this has some problems which have some errors within the useful area. We keep the useful area and extend the unuseful area by a function

• 한국연초학회지
• /
• 제13권1호
• /
• pp.69-73
• /
• 1991

Varietal response to cool temperature(18$^{\circ}C$) and short (8hr.)-day treatment were investigated under controlled conditions of Phytotron in the Suwon Agronomy Experiment Station. Five flue-cured and one burley tobacco varieties (Nicotiana tabacum L.) were used, and the length of treatment ranging from 8 to 32 days at 3-day intervals and also includes continuous treatment up to the plants were flowered. The days to flower decreased significantly than the no treatment when the length of treatment was 11 to 14 days for the varieties NC82, Br.21 and NC22NF, and 17 to 26 days for SPG-28, Mc.944 and TC499, respectively. And also the number of leaves decreased significantly than the no treatment when the length of treatment was 8 days for NC22NF, 11days for NC82 and Br.21, 14 days for Mc.944, and 17 days for SPG-28 and TC499, respectively. The maximum decreasing ratio of the leaf number by the cool temperature and short-day treatment were 47.7 to 58.5% for NC82, Br.21 and NC22NF, and 38.9% for Mc.944, 33.4% for SPG-28 and 29.0% for TC499, respectively.

• 한국CDE학회논문집
• /
• 제11권3호
• /
• pp.205-210
• /
• 2006

Curve tessellation, which generates a sequence of points from a curve, is very important for curves rendering on a computer screen and for NC machining. For the most case the sequence of discrete points is used rather than a continuous curve. This paper deals with a method of tessellation by calculating the maximal deviation of a curve. The maximal deviation condition is introduced to find the point with the maximal chordal deviation on a curve segment. In the previous research a curve tessellation was tried by the subdivision method, that is, a curve is subdivided until the maximal chordal deviation is less than the given tolerance. On the other hand, a curve tessellation by sequential method is tried in this paper, that is, points are generated successively by using the local property of a curve. The sequential method generates relatively much less points than the subdivision method. Besides, the sequential method can generate a sequence of points from a spatial curve by approximation to a planar curve. The proposed method can be applied for high-accuracy curve tessellation and NC tool-path generation.