• Journal of Korea Society of Industrial Information Systems
• /
• v.12 no.1
• /
• pp.46-53
• /
• 2007

NC (Numerical Control) code for the tool path needs to be generated efficiently for machining of free form pockets with arbitrary wall geometry on a three axis CNC machine. The unified rough and finish cut algorithm and the tool motion is graphically simulated in Part 1. In this paper, a grid based 3D navigation algorithm simulated in Part 1 for generating NC tool path data for both linear interpolation and a combination of linear and circular interpolation for three-axis CNC milling of general pockets with sculptured bottom surfaces is experimentally performed and verified.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.1
• /
• pp.179-184
• /
• 2019

In this paper, we propose a design method of Active Noise Control (ANC) that reduces perceived level of the residual noise. A FELMS (Filtered-E Least Mean Squares) algorithm is used for the ANC system and the NC (noise criteria) is applied as an evaluation criterion of the residual noise. With this structure, we present the allowable spectral shape of the noise shaping filter that minimizes the NC index within the effective operating frequency band of the ANC, and showed that the filter satisfying in the criterion has a lower NC value than the psychoacoustic-based filter used in the previous studies.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.862-867
• /
• 1997

A 5-axis NC milling technology is presented on ruled surface. Problems in 5-axis NC machining are such as tool interference,tool collision and change of tool attitude,etc. The change of tool attitude causes rotation of cutter and variation of feedrate to overcut part surface. This poor control of tool attitude is the primary problem in multi-axis NC milling. This paper observes ruled surface for control of tool attitude. Ruled surface is composed of directrix and ruling, line of constant magnitude. Directrix corresponds to points on part surface and Ruling cutting tool. Trajectory of tool movement corresponds to ruled surface.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.801-805
• /
• 2000

This paper presents a new method of tool path optimization. A NC verification model based Z-map was utilized to obtain chip load in feed per tooth. This developed software can regenerate a NC program from cutting condition and the NC program that was generated in CAM. The regenerated NC program has not only all same data of the ex-NC program but also the new feed rates in every block. The new NC data can reduce the cutting time and manufacture precision dies with the same chip load in feed per tooth. This method can also prevent tool chipping and make constant tool wear. This paper considered the effects of acceleration and deceleration in feed rate change.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.1
• /
• pp.93-100
• /
• 2000

Die-casting burr due to casting process is removed by post-process for assembly and quality control of product. Though robot has been widely used for deburring job before, CNC exclusive machine is currently developed f3r high power, high speed machining and quick tool change. Deburring tool path with complex 3D curve type is defined to make out deburring NC program. But there is no efficient method to define it currently used methods with teaching probe on machine. In this study the efficient method to make out deburring NC program is developed. 5-axis digitizing machine is used to receive data of deburring path. And the post processor for NC program generation is developed in consideration of the machining conditions. The developed system is not dependent on the skill of operator and has the advantage to maintain the flexibility of job to modify NC program due to the wear of tool and aging of the die casting.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.971-974
• /
• 1988

In this study, we designed a model of NC controller with IBM-PC as a host CPU and intelligent servo controller for 2 axes that can be expaned to 4 axes. OS software was developed with C language at the base of mode selection technic for 9 NC operating modes. Servo controller design was based on the application of interpolator IC(3701) and position controller IC(3702) that permits low cost and high performance. For connection of two systems, parallel I/O communication was implemented. Finally, auto interpolation program test was executed for linear and circular paths resulting 1 LSB accuracy.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.24 no.2
• /
• pp.16-27
• /
• 2011

Objective : To investigate the effects of Pyeongwi-san-gamibang on atopic dermatitis, this study measured TEWL(transepidermal water loss), observed scratching behaviors and checked levels of Total IgE, IL-4, IFN-${\gamma}$ and conducted skin biopsy on NC/Nga mice with atopic dermatitis. Methods : NC/Nga mice were challenged with DNCB during 5 weeks to develop atopic dermatitis-like skin lesions. The NC/Nga mice with atopic dermatitis were divided into three groups of control group, PW-d, PW-e group. Once a day for 22 days, Pyeongwi-san-GamiBang extract with water was administered for the PW-d group and the extract with 80% ethanol was administered for PW-e group compared with saline solution for control group. During drug administration, sensitization by DNCB had lasted for three times per week. Results : 1. TEWL had no statistical difference among 3 groups. 2. The scratching behaviors had no statistical difference among 3 groups. 3. The levels of Total IgE in PW-d, PW-e group had a statistically significantly higher than that of the control group although difference between the control group and the PW-d, PW-e group were similar. 4. The level of IL-4 had no statistical difference among 3 groups. 5. The level of IFN-${\gamma}$ had no statistical difference among 3 groups. 6. As the observation of toluidine blue stained lesion, both PW-d and PW-e group had lower level of histamine releasement compared with the control group. Conclusion : Result based on these experiments, Pyeongwi-san-GamiBang on atopic dermatitis-like skin inflammation in NC/Nga mice is not effective. But, as the study showed significantly individual differece, we need to repeat these study after supplementing the object number and modified indicator of clinical severity.

• The Journal of Pediatrics of Korean Medicine
• /
• v.21 no.2
• /
• pp.13-34
• /
• 2007

Objectives The purpose of this study is to examine of the effect of SPAR medicines on the atopy eruption control Methods This experiment is about the expression of IgE, IL-4, IL-6, IL_13, IgM, IgG2a, IgG2b, IgG1 level in serum, and $IFN-{\gamma}$ production by SPAR medicines. We assayed for $CD3e^+/CD69^+$, $CD044^+/CD19^+$ positive cells by flow cytometry in splenocytes and observed the revelation of $CD3e^+/CD69^+$, $CD4^+/CD8^+$, $CD44^+/CD19^+$ marker in PBMC, spleen and DLN. We also observed the outturn of IL-4, IL-5, CCR3, $IFN-{\gamma}$ in skin of a NC/Nga mice. We also analyzed NC/Nga mice's ear and neck-back skin after biopsy and dye by H&E staining method, measured about epidermis and dermis part in comparison with control group. Results SPAR medicines as treatment result to a NC/Nga mice, clinical skin severity score decreased remarkably than the ontrol group. Specially, experiment was results by measuring IgE and IL-6 content in serum 8 weeks, 10 weeks, 12 weeks, 16 weeks, 20 weeks respectively, and it was decreased remarkably than the control group. After experiment ended, the result that observed the revelation CD3e, CD4, CD8, CD19, CD69, CD11a marker in lymph node establishment were observed and that B/T rate becomes recover as normal with political background. In addition to that, the control group was decreased in the measured value of IL-4, IL-5, IL-13, IgM, IgG2a, IgG1's level in serum, and $IFN-{\gamma}$' production secreted in Th1 cell displayed increase by SPAR medicines. IL-4, IL-5, CCR3, and $IFN-{\gamma}$'s gene revelation amount displayed marked decrease than the control group in result that observe effect that get in skin of a NC/Nga dermatitis mouse. Moreover in culture supernatant which cultivate for 14 days after separate skin cell, IL-13 and IL-6 production, and $CD69^+/CD3e^+$, $CD44^+/CD19^+$ expression cell number was decreased than the control group's number. Course inflammation immunocyte permeated of result that effect that SPAR medicines get to NC/Nga mice's skin establishment analyzes ear and neck-back skin after biopsy, and dye by H&E method decreased about epidermis and inflammation of dermis part remarkably than the control group. Conclusions Th1 cell and Th2 cell observe to be shifted by secretion amount of IL-4 and $IFN-{\gamma}$ by SPAR medicines could know that SPAR medicines can be use for treatung allergy autoimmune disease.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2011.09a
• /
• pp.101-105
• /
• 2011

In most shipbuilding company, cutting procedure is proceed by cutting machine which run by CNC(Computer Numerical Code) data. In our cutting process, all CNC data is created by our nesting post processor system automatically. Among them, in case that cutting piece in the remnant plate, our system creates only one piece CNC data. Because remnant plate is not typical shape, and ship designers don't know remnant plate shape and quantity. In can happen some merit and good point if we modify 1:1 piece NC data by shorten cutting path, reducing cutting time or re-arrangement piece. For modifying cutting data, outside workers have to call to ship designer or have to go to NC control room where control the CNC system and cutting machine. It makes stop work process, and it waste time. In this paper, we introduce a program that can modify and replace 1:1 NC data with continuous or common NC data automatically.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.809-814
• /
• 1991

기존의 CNC Controller를 재구성하면 제어성과 절삭성의 재고에 큰 효과를 낼 수 있다. 현실적으로 시스템의 재구성은, 가) 시스템의 재구성으로 2축 CNC 기계를 다축으로 전환시킬 수 있고, 나) 모터의 직접제어에 의한 G-code 작성과정의 생략이 가능하며, 다) NC 동작의 제어가 소프트웨어로 (C 언어) 이루어 지기 때문에 사용자환경에 맞도록 고객화가 가능한 강점이 있다. 나아가서는 형상의 정의에서 NC 기계동작의 제어 및 온라인 모니터링에 이르는 전과정을 소프트웨어로 일식화 시킬 수 있는 통합 NC 시스템의 구현이 가능하다. 본 논문에서는 이러한 목적으로 연구되고 있는 INCS(Integrated NC System)의 개발현황을 소개한다. INCS는 PC-286, NC Controller, Drive Amplifier, Sensing Device의 하드웨어 시스템과 CAD, CAM 및 CNC 기능을 수행하는 소프트웨어 시스템으로 구성되어 있다. 그래픽 시뮬레이션 및 실제 절삭을 통하여 개발된 방식의 유효성과 효율성을 설명한다.