• Journal of Korea Society of Industrial Information Systems
• /
• v.9 no.1
• /
• pp.7-16
• /
• 2004

The tool path needs to be determined in an efficient manner to generate the final NC (numerical control) code for efficient machining. This is particularly important in machining free form pockets with an arbitrary wall geometry on a three-axis CNC machine. Many CAD/CAM systems use linear interpolation to generate NC tool paths for curved surfaces. However, this needs to be modified to improve the smoothness of the machined bottom surface, reduce machining time and CL (cutter location) file size. Curved machining can be a solution to reduce these problems. The unified rough and finish cut algerian and the tool motion is graphically simulated. In this paper, a grid based 3D navigation algorithm for generating NC tool path data for both linear interpolation and a combination of linear and circular interpolation for three-axis CNC milling of general pockets with sculptured bottom surfaces is developed.

• Journal of the Korea Convergence Society
• /
• v.7 no.1
• /
• pp.17-23
• /
• 2016

In this paper, we describe a case of utilizing SaaS technology to build NC Post-processor(WBS) based cloud computing. Developed WPS system was implemented to provide stable and continuous system service by utilizing SCoD methodology. WPS is designed user interface module and control engine module. The interface module is downloaded in a client PC and the control engine is installed in cloud parm area. These modules are connected with computer network. WPS was completed a function test for sheet cutting field and mold manufacturing field, and it is processing a commercial service using with improve the user's convenience and adding a bill charge module.

• Korean Journal of Computational Design and Engineering
• /
• v.4 no.2
• /
• pp.110-120
• /
• 1999

In general, turbine blades are usually machined on 5-axis NC machine. The 5-axis machining of sculptured surface offers many advantages over 3-axis machining including the faster material-removal rates and an improved surface finish. But it is difficult and time-consuming to generated interference-free 5-axis tool path. This paper describes research on the algorithm for generation of an interference-free 5-axis NC data for machining turbine blades. The approach, using the section profile derived from the intersection of cutting planes with a triangulated-surface approximation, includes (1) CL-data generation by detecting an interference-free heel angle (2) the calculation method for finding a adaptive feed-rate value, and (3) the inverse kinematics depending on the structure of 5-axis machine.

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.2
• /
• pp.51-62
• /
• 1998

In this paper, a CAD/CAM system for 5-axis machining of model propeller is introduced. This system has been developed under the environment of personal computer and Windows NT. In order to enhance the productivity, existing text-based design S/W was integrated into this graphic-based system. Non-Uniform Rational B-Spline method is used to represent the sculptured surface of propeller blades and hub using point data, and surface blending between blade and hub is realized in this system. For 5-axis machining of sculptured surface, tool/work collision and interference are checked and inverse kinematic analysis is performed to make NC data. In addition, tool and workpiece are animated on the PC monitor by preparing NC verification module. Finally, optimal cutting conditions are determined empirically and those cutting conditions are integrated into this S/W so that the whole process from design to machining can be done automatically.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.9
• /
• pp.965-970
• /
• 2010

Because of a large number of subcarriers, the high PAPR(Peak-to-Average Power Ratio) is the major drawback of NC-OFDM system used for wireless communication system. Comb type pilot assignment is more efficient and lower computational complexity for the channel estimation than the block type pilot. However, even if the CAZAC(Constant Amplitude Zero Autocorrelation) matrix transform is used for the PAPR reduction of the data symbols, PAPR increases when the pilot is inserted in comb type with the data symbols. Therefore, in this paper, we additionally use a new SLM technique in order to lower the PAPR again even in the comb type pilot. Also, a new SLM technique suggested in this paper does not need any additional bandwidth for sending selection information for SLM. This combined method has good PAPR reduction performance and efficient data transmission.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2011.09a
• /
• pp.101-105
• /
• 2011

In most shipbuilding company, cutting procedure is proceed by cutting machine which run by CNC(Computer Numerical Code) data. In our cutting process, all CNC data is created by our nesting post processor system automatically. Among them, in case that cutting piece in the remnant plate, our system creates only one piece CNC data. Because remnant plate is not typical shape, and ship designers don't know remnant plate shape and quantity. In can happen some merit and good point if we modify 1:1 piece NC data by shorten cutting path, reducing cutting time or re-arrangement piece. For modifying cutting data, outside workers have to call to ship designer or have to go to NC control room where control the CNC system and cutting machine. It makes stop work process, and it waste time. In this paper, we introduce a program that can modify and replace 1:1 NC data with continuous or common NC data automatically.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.5
• /
• pp.5-12
• /
• 2010

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11b
• /
• pp.265-267
• /
• 2005

최근 포유동물의 유전체에는 알려진 것보다 훨씬 많은 RNA 전사체가 발현되고 있음이 밝혀지고 있으며, 그 중에 많은 부분이 non-coding RNA로 알려지고 있다. 세포 내에서 non-coding RNA의 기능이 훨씬 다양해지고, 중요해지고 있는 상황에서 새로운 non-coding RNA를 정의하고, 탐색하는 것은 가장 시급한 과제이다. 본 연구에서는 이전 연구에서 RNA 공통 구조 학습을 위해 제안되었던, esRCSG (evolutionary search for RNA common-structural grammar) 알고리즘의 성능 향상을 위해, committee machine을 도입한다. Committee machine은 마지막 세대에서 최적화된 RNA 공통 구조 기술자 (RCSD)와 차상위로 최적화된 기술자들 중 양성데이터와 음성데이터의 치역을 합쳤을 때 특이도는 거의 변화가 없으면서 민감도의 증가가 가장 큰 기술자들의 집합이다. Committee machine은 특히 family type의 서열의 가진 특정 ncRNA에서 좋은 성능 향상을 보인다. microRNA를 이용한 성능평가에서 특이도의 변화가 거의 없이 민감도의 성능이 약 1.5배 향상되는 결과를 보였다. 이러한 특이도와 민감도가 높은 기술자를 이용함으로써 새로운 non-coding RNA를 예측하는 것을 약속할 수 있을 것이다.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2005.05a
• /
• pp.1101-1107
• /
• 2005

Mold industry has the difficulty to employ young people as the successors of the skilled workers, because it has been regarded as a 3D-jobs(dirty, difficult, and dangerous). To overcome this situation, thus, manufacturing technologies maintained in the factory should be systemized, and engineering systems should support unskilled workers to do their jobs without any difficulty. As a research of developing the supporting system, this study proposes a decision support system that facilitates unskilled workers to easily select high quality NC-data, as well as to increase productivity. The proposed system is assumed to follow a CAM operation scenario that consists of next three steps: 1) identifying several process plans and enumerating feasible unit machining operations (UMOs) from material and part surface information, 2) creating all feasible NC-data based on UMOs using a commercial CAM system, 3) selecting the best NC data among the feasible NC data using four screening criteria, such as machining accuracy, machining allowance, cutting load, and processing time. A case study on the machining of a camera core mold is provided to demonstrate the proposed system.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.5
• /
• pp.25-33
• /
• 2000

제조업 분야에서는 오랫동안 표준화를 통해서 정보교환의 문제를 줄이고자 노력해왔다. 대표적인 예로 도면을 통한 제품정보의 교환을 들 수 있나. 그러나, 제품수명주기의 단축, 소비자 욕구의 다양화, 기업 경쟁의 격화, 가상기업의 출현 등으로 도면을 포함한 문서에 의한 제품정보의 교환은 데이터의 부정확, 과다한 문서의 보관, 린 정보 교환 속도 등 많은 문제를 야기하고 있다.