• 제목/요약/키워드: NAS

검색결과 286건 처리시간 0.029초

Mechanical, durability and microstructure properties of concrete containing natural zeolite

  • Nas, Memduh;Kurbetci, Sirin
    • Computers and Concrete
    • /
    • 제22권5호
    • /
    • pp.449-459
    • /
    • 2018
  • Concrete is one of the most widely used construction materials in the world. Producing economical and durable concrete is possible by employing pozzolanic materials. The aim of this study is to underline the possibility of the utilization of natural zeolite in producing concrete and investigate its effects basically on the strength and durability of concrete. In the production of concrete mixes, Portland cement was replaced by the natural zeolite at ratios of 0%, 10%, 15%, and 20% by weight. Concretes were produced with total binder contents of $300kg/m^3$ and $400kg/m^3$, but with a constant water to cement ratio of 0.60. In addition to compressive and flexural strength measurements, freeze-thaw and high temperature resistance measurements, rapid chloride permeability, and capillary water absorption tests were performed on the concrete mixes. Compared to the rest mixes, concrete mixes containing 10% zeolite yielded in with the highest compressive and flexural strengths. The rapid chloride permeability and the capillary measurements were decreased as the natural zeolite replacement was increased. Freeze-thaw resistance also improved significantly as the replacement ratio of zeolite was increased. Under the effect of elevated temperature, natural zeolite incorporated concretes with lower binder content yielded higher compressive strength. However, the compressive strengths of concretes with higher binder content after elevated temperature effect were found to be lower than the reference concrete.

단일공기막 구조물의 설계하중에 따른 비선형 응력-변형 해석 및 설계에 관한 연구 (A Study on the Nonlinear Stress-Deformation Analysis and Design of Unity-typed Pneumatic Structures Under the Design Load)

  • 손수덕;정을석;김승덕
    • 한국공간구조학회논문집
    • /
    • 제5권2호
    • /
    • pp.47-55
    • /
    • 2005
  • 공기막구조물의 공간형성방법은 크게 단일공기막과 이중공기막 방식으로 나뉜다. 내압으로 인해 평형곡면이 형성되는 공기막구조물의 형상은 형태의 변화가 외력에 의해 크게 변형되거나 응력이 집중되지 않는 등장력 곡면으로 많이 이용된다. 따라서 본 연구에서는 공기막 구조물의 초기 형성된 형상에 대해서 설계하중조합에 대한 구조해석을 비선형 전용해석프로그램인 NASS를 이용하여 수행한 후 변형형상을 살펴보고, 최대응력을 이용하여 안전성을 검토한다. 해석 모델은 사면에서 지지되는 장방형 단일공기막 구조물을 대상으로 하며, 직교이방성을 고려하여 비선형 증분해석을 수행한다.

  • PDF

해양플랜트 프로세스 배관 내경 플러싱 오일속에서 수분제거를 위한 실험적 품질 특성 (Experimental Quality Characteristics for Water Removal in Inner Flushing Oil in Process Piping of Offshore Plant)

  • 박창수;성기영;한성종
    • 한국산업융합학회 논문집
    • /
    • 제22권6호
    • /
    • pp.797-805
    • /
    • 2019
  • An important problem of offshore plant process piping is equipment accidents due to the removal of fine metal debris and foreign substances in the pipes that deliver fluids such as hydraulic oil, lubricating oil and thermal oil. Temporary flushing equipment to remove debris uses fluid equipment of centrifugal pump and gear pump to prevent equipment accident of offshore platform. The equipment manufacturer requires the shipyard to have a cleanliness rating inside the pipe to meet the international standards ISO4406 and NAS1638 quality levels to prevent damage to the equipment sold. The quality of the internal flushing of pipes conforms to the regulations suggested by the equipment manufacturer. In this paper, three types of electric heater capacity, which is a method of evaporating and removing water inside a pipe during an oil flushing process, were compared. In addition, the study was conducted to remove the flushing oil in the pipe and to improve oil quality.

지능형 교통시스템의 실시간 정보 서비스를 위한 IPv6 기술 연구 (The study on IPv6 technology for real-time information services of intelligent transportation system)

  • 임일권;김영혁;liqigui;박소아;이재광;박우전;천병구
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2010년도 추계학술대회
    • /
    • pp.417-420
    • /
    • 2010
  • 늘어나는 교통문제 해결의 최적의 대안으로 지능형교통시스템(ITS: Intelligent Transportation System)이 연구되고 있으며 국내에서는 2001년 "국가 ITS 기본계획 21"이 수립되어 사업을 추진 중이다. 본 논문은 국내의 지능형 교통시스템을 이용한 실시간 도로 상황과 교통정보 서비스를 구현하고, IPv6를 이용하기 위해 시스템에 IPv4와 IPv6의 호환기술을 적용하였다.

  • PDF

Analysis of the Genetic Relationship among Mulberry (Morus spp.) Cultivars Using Inter-Simple Sequence Repeat (ISSR) Markers

  • Park, Eun-Ju;Kang, Min-Uk;Choi, Myoung-Seob;Sung, Gyoo-Byung;Nho, Si-Kab
    • International Journal of Industrial Entomology and Biomaterials
    • /
    • 제41권2호
    • /
    • pp.56-62
    • /
    • 2020
  • Mulberry (Morus spp. family: Moraceae) has prime importance in the sericulture industry, and its foliage is the only natural feed of the silkworm Bombyx mori L. Traditional classification methods using morphological traits were largely unsuccessful in assessing the diversity and relationships among different mulberry species because of environmental influences on the traits of interest. For these reasons, it is difficult to differentiate between the varieties and cultivars of Morus spp. In the present study, inter-simple sequence repeat (ISSR) markers were used to investigate the genetic diversity of 48 mulberry samples genotyped using nine ISSR primers. The ISSR markers exhibited polymorphisms (53.2%) among mulberry genotypes. Furthermore, similarity coefficient estimated for these ISSR markers was found to vary between 0.67 and 0.99 for the combined pooled data. The phenogram drawn using the UPGMA cluster method based on combined pooled data of the ISSR markers divided the 48 mulberry genotypes into seven major groups. No genetic association was found in the collection area, and there was a mixed pattern between the mulberry lines. The hybridization between different mulberry species is highly likely to be homogenized due to natural hybridization.

Durability properties of mortars with fly ash containing recycled aggregates

  • Kurbetci, Sirin;Nas, Memduh;Sahin, Mustafa
    • Advances in concrete construction
    • /
    • 제13권1호
    • /
    • pp.101-111
    • /
    • 2022
  • The rapid development of the construction industry in the world causes a rapid increase in the consumption of aggregate resources, which leads to the depletion of existing aggregate reserves. The use of recycled aggregate in the production of concrete and mortar may be a good solution to reduce the use of natural raw materials and to reduce demolition waste in the environment. In this study investigating the use of recycled aggregate in mortar production, mortar mixtures were produced by substituting 0%, 25%, 50% and 100% fine recycled aggregate (FRA) instead of natural aggregate. The effect of 20% and 40% fly ash (FA) substitutes on cement mortar performance was also investigated. Compressive and flexural strength, drying shrinkage, abrasion resistance, water absorption and capillary water absorption were investigated on the produced mortars. The increase in the use of FRA reduced the compressive and flexural strengths of mortars. While the capillarity coefficients, water absorption, rapid chloride permeability and drying shrinkage of the mortars increased with the increase in the use of FRA, the effect of the use of fly ash on the rate of increase remained lower. The increased use of FRA has improved abrasion resistance as well.

Finite-element analysis and design of aluminum alloy RHSs and SHSs with through-openings in bending

  • Ran Feng;Tao Yang;Zhenming Chen;Krishanu Roy;Boshan Chen;James B.P. Lim
    • Steel and Composite Structures
    • /
    • 제46권3호
    • /
    • pp.353-366
    • /
    • 2023
  • This paper presents a finite-element analysis (FEA) of aluminum alloy rectangular hollow sections (RHSs) and square hollow sections (SHSs) with circular through-openings under three-point and four-point bending. First, a finite-element model (FEM) was developed and validated against the corresponding test results available in the literature. Next, using the validated FE models, a parametric study comprising 180 FE models was conducted. The cross-section width-to-thickness ratio (b/t) ranged from 2 to 5, the hole size ratio (d/h) ranged from 0.2 to 0.8 and the quantity of holes (n) ranged from 2 to 6, respectively. Third, results obtained from laboratory test and FEA were compared with current design strengths calculated in accordance with the North American Specifications (NAS), the modified direct strength method (DSM) and the modified Continuous strength method (CSM). The comparison shows that the modified CSM are conservative by 15% on average for aluminum alloy RHSs and SHSs with circular through-openings subject to bending. Finally, a new design equation is proposed based on the modified CSM after being validated with results obtained from laboratory test and FEA. The proposed design equation can provide accurate predictions of flexural capacities for aluminum alloy RHSs and SHSs with circular through-openings.

Sodium Salicylate Inhibits Expression of COX-2 Through Suppression of ERK and Subsequent $NF-{\kappa}B$ Activation in Rat Ventricular Cardiomyocytes

  • Kwon, Keun-Sang;Chae, Han-Jung
    • Archives of Pharmacal Research
    • /
    • 제26권7호
    • /
    • pp.545-553
    • /
    • 2003
  • The expression of cyclooxygenase-2 (COX-2) is a characteristic response to inflammation, which can be inhibited with sodium salicylate. IL-1$\beta$ and TNF-$\alpha$ can induce extracellular signal-regulated kinase (ERK), IKK, IkB degradation and NF-$\kappa$B activation. Salicylate inhibited the IL-1$\beta$ and TNF-$\alpha$-induced COX-2 expressions, regulated the activation of ERK, IKK and IkB degradation, and the subsequent activation of NF-$\kappa$B, in neonatal rat ventricular cardiomyocytes. The inhibition of the ERK pathway, with a selective inhibitor, PD098059, blocked the expressions of IL-1$\beta$ and TNF-$\alpha$-induced COX-2 and $PGE_2$ release. The antioxidant, N-acetyl-cysteine, also reduced the glutathione or catalase- attenuated COX-2 expressions in IL-1$\beta$ and TNF-$\alpha$-treated cells. This antioxidant also inhibited the activation of ERK and NF-$\kappa$B in neonatal rat cardiomyocytes. In addition, IL-1$\beta$ and TNF-$\alpha$-stimulated the release of reactive oxygen species (ROS) in the cardiomyocytes. However, salicylate had no inhibitory effect on the release of ROS in the DCFDA assay. The results showed that salicylate inhibited the activation of ERK and IKK, I$\kappa$B degradation and NF-$\kappa$B activation, independently of the release of ROS, which suggested that salicylate exerts its anti-inflammatory action through the inhibition of ERK, IKK, IkB and NF-$\kappa$B, and the resultant COX-2 expression pathway in neonatal rat ventricular cardiomyocytes.

중세 이슬람이 보인 입방배적문제 해결방법들의 재조명과 시각화 (The reinterpretation and the visualization of the cube duplication problem solving in medieval Islam)

  • 김향숙;박진석;이은경;이재돈;하형수
    • East Asian mathematical journal
    • /
    • 제30권2호
    • /
    • pp.173-195
    • /
    • 2014
  • This study, utilizing several features about plane figures covered in the current secondary curriculum of mathematics and reviewing two solutions to cube duplication problem presented by Menaechmus, proving the solution by Nicomedes and visualizing solutions based on Apollonius' 'Conics' by medieval Islam geometricians such as Ab$\bar{u}$ Bakr al-Haraw$\bar{i}$, AbAb$\bar{u}$ J$\acute{a}$far al-Kh$\bar{a}$zin, Nas$\bar{i}$r al-D$\bar{i}$n al-T$\bar{u}s\bar{i}$, Y$\bar{u}$suf al-Mu'taman ibn H$\bar{u}$d, introduce to teachers and students in the field where the question of cube duplication problem comes from and which solving method has developed it and suggests new methods for visualization using dynamic geometry program as well so that the contents reviewed can be used in the filed. The solving methods to cube duplication problem in this paper are very creative and increase the practicality, efficiency and value of Mathematics, and provide students and teachers with the opportunities to reconfirm the importance and beauty of basic knowledge in the secondary geometry in the process of visualization of drawing figures using dynamic geometry program.

Pseudomonas sp. HJ로부터 Polyhydroxyalkanoate 대량생산을 위한 유가식 배양 (Fed-Batch Culture for Polyhydroxyalkanoate Overproduction by Pseudomonas sp. HJ)

  • 손홍주;이상준
    • KSBB Journal
    • /
    • 제11권2호
    • /
    • pp.201-210
    • /
    • 1996
  • 본 연구는 단일 탄소원인 포도당으로부터 PHA를 생산하는 공시균 Pseudomonas sp. HJ의 유가배양 을 검토함으로써, PHA 대량생산을 위한 기초자료 를 얻는데 그 목적을 두었으며 그 결과는 다음과 같다. U 발효조를 이용하여 배양시 교반속도 4 400rpm, 통기량 2vvm, 종균 배양시간 18 시간 및 종균 접종량 5%(v/v)일때 최적 생육을 나타내었다. 공시균 Pseudomonas sp. HJ는 용존산소의 결핍 에 의해서 PHA 축적율이 향상되지 않았으며, P PHA 생산단계에 충분한 수준으로 용존산소를 유지 시켜 주어야 함을 알 수 있었다. 공시균 Pseudomo­7 nas sp. HJ를 회분배양했을 때 24시간만에 $6.251g/\ell$의 건조균체량과 20% 의 PHA 축적율을 나타내었으며, constant feeding fed-batch culture로 배 양 45시간만에 최고$33.24g/\ell$의 건조균체량과 48.9%의 PHA 축적율을 나타내었다. 또한 intermit­t tent feeding fed-batch culture로 공시균 Pseu domonas sp. HJ를 배양했을때, 배양 45시간만에 $37.89g/\ell$의 건조균체량과 53.5%의 PHA 축적율을 나타내였다.

  • PDF