• Journal of Animal Science and Technology
• /
• v.57 no.6
• /
• pp.21.1-21.8
• /
• 2015

The digestibility of different vegetable protein sources were investigated and the effects of supplementing canola meal (CM) as partial inclusions were studied in growing pigs, to determine the performance parameters and its economic importance. In Exp. 1, four pigs (average initial $BW=15.4{\pm}0.35kg$, 5 weeks of age) fitted with simple T-cannula at terminal ileum, were fed four diets following repeated $4{\times}4$ Latin square design having adoption period of 7 days. Diet 1 was Nitrogen free diet containing corn starch. Diets 2, 3, and 4 were the basal diet supplemented with soybean meal (SBM), rapeseed meal (RSM), and domestic CM respectively. The AID of crude protein was decrease in RSM in comparison to SBM supplementation. The AID of Dietary indispensable amino acids (DIAA) such as Lys, Meth, Pha, and dispensable amino acid Ala, Pro, Asp were decreased (P < 0.05) in RSM supplemented diets. The SID of DIAA does not differ but the SID of Asp was higher (P < 0.05) in RSM and CM diets while SID of Pro was lower (P < 0.05) in RSM in comparison to SBM supplemented diets. In Exp. 2, 192 growing pigs (average initial BW $24.76{\pm}2.55kg$) were randomly allotted to four dietary treatments with increasing levels of CM i.e. 0, 3.75, 7.50, and 11.25 % respectively. Diets were fed in meal form for 35 days. Increasing CM levels in diets had no effects (P > 0.05) on growth performance and apparent total tract digestibility (ATTD) of nutrients and energy. Total weight gain, total feed intake, and feed cost per kg weight gain were not affected by increasing levels of CM in diets but total feed cost (TFC) per pigs was linearly reduced (26.463 to 25.674; P < 0.05). Broadly, the AID, and SID of amino acid was reduced in RSM but was not effected in CM in comparison to SBM supplemented pigs. Moreover, increasing levels of CM in pigs diet had no effect on the ATTD and performance but TFC per pig was reduced. Thus CM inclusion of up to 11.25 % in diets can be used for reducing the production cost in growing pigs without any negative effect.

• Animal Bioscience
• /
• v.35 no.10
• /
• pp.1592-1605
• /
• 2022

Objective: The objective of this study was to select an effective in vitro digestion-fermentation model to estimate the effect of decreasing dietary crude protein (CP) on odor emission during pig production and to suggest potential prediction markers through in vitro and in vivo experiments. Methods: In the in vitro experiment, three diet formulations with different CP contents (170 g/kg, 150 g/kg, and 130 g/kg) but containing the same standardized ileal digestible essential amino acids (SID-EAA) were assessed. Each diet was evaluated by two different in vitro gastric-intestinal phase digestion methods (flask and dialysis), combined with fresh pig feces-ferment inoculation. Eighteen growing barrows (31.9±1.6 kg) were divided into three groups: control diet (180 g CP/kg, without SID-EAA adjustment), 170 g CP/kg diet, and 150 g CP/kg diet for 4 weeks. Results: The in vitro digestion results indicated that in vitro digestibility was affected by the gastric-intestinal phase digestion method and dietary CP level. According to the gas kinetic and digestibility results, the dialysis method showed greater distinguishability for dietary CP level adjustment. Nitrogen-related odor compounds (NH₃-N, indole, p-cresol, and skatole) were highly correlated with urease and protease activity. The feeding study indicated that both EAA-adjusted diets resulted in a lower odor emission especially in p-cresol and skatole. Both protease and urease activity in feces were also closely related to odor emissions from nitrogen metabolism compounds. Conclusion: Dialysis digestion in the gastric-intestinal phase followed by fresh fecal inoculation fermentation is suitable for in vitro diet evaluation. The enzyme activity in the fermentation and the fecal samples might provide a simple and effective estimation tool for nitrogen-related odor emission prediction in both in vitro and in vivo experiments.

• Animal Bioscience
• /
• v.37 no.6
• /
• pp.1085-1095
• /
• 2024

Objective: The main objective of this study was to determine available energy and nutritional digestibility of extruded cereals and the effect of extrusion on the nutritional value of feed ingredients, aiming to provide scientific basis for efficient application of extrusion in the diets of growing pigs. Methods: In Exp. 1, 48 crossbred growing pigs (Duroc×Landrace×Yorkshire) with an initial body weight (BW) of 34.6±2.2 kg were selected and fed with eight diets (non-extrusion or extrusion) to determine the digestible energy (DE), metabolizable energy (ME), and nutrients digestibility. Eight diets included extruded grains (barley, wheat, sorghum, or broken rice), while four had unprocessed grains. In Exp. 2, 9 diets were formulated including 4 cereals with extrusion or non-extrusion and a N-free diet. In addition, 9 growing pigs (BW = 22.3±2.8 kg) were fitted with T-cannula in the distal ileum and arranged in a 9×6 Youden square design. Results: Results show that apparent total tract digestibility of gross energy, dry matter, organic meal, ether extract, neutral and acid detergent fiber was not affected by the extrusion process and there was no interaction between cereal type and extrusion treatment on DE, ME. However, the apparent total tract digestibility for crude protein (CP) increased markedly (p<0.05). The standardized ileal digestibility (SID) of all amino acids (AA) except for leucine remarkably increased by extrusion (p<0.05). There was an interaction on the SID of arginine, leucine, isoleucine, methionine, phenylalanine, cystine, and tyrosine in growing pigs between type of grain and extrusion treatment (p<0.05). Conclusion: Extrusion increased the ileal digestibility of CP and most AA in cereals, however, the DE and ME of cereals were not affected in growing pigs.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.31 no.2
• /
• pp.95-102
• /
• 2015

Insects are heterotherms that exhibit a close relationship between their ecology (especially temperature changes) and physiology. In the present study, selected genes associated with cell death and temperature were examined to determine gene expression in Bombyx mori in high and low temperature environments. We determined the amount of dsRNA, different concentrations of dsRNA, and different type of cells to set the conditions most efficient for RNAi. We then prepared dsRNA transcripts of the genes associated with cell death and temperature response. We analyzed cell damage via Trypan blue staining and found that cell viability was reduced after knockdown of these genes. The special transduced cell lines produced in the present study can be applied in various research fields. We also expect that these cell lines can be used as a research tool for the precise functional analysis of various genes.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.37 no.2
• /
• pp.85-93
• /
• 2024

In this paper, we propose a method for establishing a state-space equation model for the motion analysis of floating structures subjected to wave loads, by applying system-identification techniques. Traditionally, the motion of floating structures has been analyzed in the time domain by integrating the Cummins equation over time, which utilizes a convolution integral term to account for the effects of the retardation function. State-space equation models have been studied as a way to efficiently solve floating-motion equations in the time domain. The proposed approach outlines a procedure to derive the target transfer function for the load-displacement input/output relationship in the frequency domain and subsequently determine the state-space equation that closely approximates it. To obtain the state-space equation, the method employs the N4SID system-identification method and an optimization approach that treats the coefficients of the numerator and denominator polynomials as design variables. To illustrate the effectiveness of the proposed method, we applied it to the analysis of a single-degree-of-freedom model and the motion of a six-degree-of-freedom barge. Our findings demonstrate that the presented state-space equation model aligns well with the existing analysis results in both the frequency and time domains. Notably, the method ensures computational accuracy in the time-domain analysis while significantly reducing the calculation time.

• Smart Structures and Systems
• /
• v.4 no.2
• /
• pp.195-208
• /
• 2008

This paper summarizes the experimental vibration-based structural health monitoring study on a historical monument in Jordan. In this work, and within the framework of the European Commission funded project "wide-Range Non-Intrusive Devices Toward Conservation of Historical Monuments in the Mediterranean Area", a seven and a half century old minaret located in Ajloun (73 km north of the capital Amman) is studied. Because of their cultural value, touristic importance and the desire to preserve them for the future, only non-destructive tests were allowed for the experimental investigation of such heritage structures. Therefore, after dimensional measurements and determination of the current state of damage in the selected monument, ambient vibration tests are conducted to measure the accelerations at strategic locations of the system. Output-only modal identification technique is applied to extract the modal parameters such as natural frequencies and mode shapes. A Non-linear version of SAP 2000 computer program is used to develop a three-dimensional finite element model of the minaret. The developed numerical model is then updated according to the modal parameters obtained experimentally by the ambient-vibration test-results and the measured characteristics of old stone and deteriorated mortar. Moreover, a parametric identification method using the N4Sid state space model is employed to model the dynamic behavior of the minaret and to build up a robust, immune and noise tolerant model.

• Journal of Life Science
• /
• v.26 no.8
• /
• pp.875-880
• /
• 2016

The plasma membrane plays a crucial role in relaying signals from the outside environment to the inside of the cells. In eukaryotic cells, the inner leaflets of the plasma membrane are composed mostly of phospholipids, including phosphatidylethanolamine (PE), phosphatidylserine (PS), and phosphatidylinositides (PIs). In this study, we tried to analyze the morphological changes induced by EGFP-fused membrane binding proteins, which are targeted to the plasma membrane via specific phospholipids binding. As a result, we found that overexpression of EGFP-P4M-SidM, a specific PI4P binding protein, or EGFP alone, did not induce any morphological changes. On the other hand, overexpression of EGFP-PLCδ1(PH), which is a specific PI(4,5)P₂ binding protein, EGFP-AKT1(PH) which binds to PI(3,4,5)P₃, or EGFP-OSH2(PH)×2 which binds to PI4P and PI(4,5)P₂, could induce the filopodia and lamilapodia formation as well as cell shrinkage. Overexpression of Lact-C2-EGFP which is a specific PS-binding probe, EGFP fused Aplysia phosphodiesterase 4 (ApPDE4) long-form (L(N20)-EGFP) which is localized to the plasma membrane via hydrophobic interaction, or EGFP fused Aplysia PDE4 short-form (S(N-UCR1-2)-EGFP) which is localized to the plasma membrane via electrostatic interaction, could induce cell shrinkage, but not filopodia or lamilapodia formation. Taken together, our data support that the different phospholipid bindings in the plasma membrane could induce different characteristic morphological changes. Thus, we can analyze, characterize, and classify the cellular morphological changes induced by the various phospholipid binding proteins.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.7
• /
• pp.1016-1025
• /
• 2009

Two experiments were conducted to determine energy and nutrient digestibility in four sources of distillers dried grains with solubles (DDGS) produced from corn and fed to growing pigs. The objective was to test the hypothesis that energy and nutrient digestibility in DDGS does not vary if samples are procured from ethanol plants that use similar production technologies and use corn that is grown within a narrow geographical area. The four sources of DDGS that were used were procured from ethanol plants that were less than 10 yr old and located within 250 km of each other. In Exp. 1, five growing barrows (initial BW = 71.4 kg) that were fitted with a T-canula in the distal ileum were allotted to a 5${\times}$5 Latin square design and used to measure apparent (AID) and standardized (SID) ileal digestibility of AA in the four sources of DDGS. Results of this experiment showed that the SID of CP and all AA except Cys and Pro were greater (p<0.05) in two of the DDGS sources than in the other two sources. Exp. 2 was conducted to measure the concentration of DE and ME and the apparent total tract digestibility (ATTD) of energy, N, P, ether extract, NDF, and ADF in corn and in the same four sources of DDGS as used in Exp. 1. Five pigs (initial BW = 29.7 kg) that were placed in metabolism cages and allotted to a 5${\times}$5 Latin square design were used. Results of Exp. 2 showed that the average DE and ME in DDGS were 4,072 and 3,750 kcal/kg DM, respectively, which was less (p<0.01) than the DE and ME in corn (4,181 and 4,103 kcal/kg DM, respectively). The average ATTD for P in DDGS was 56.1%, which was greater (p<0.01) than the ATTD for P in corn (31.9%). The ATTD for ADF in DDGS was also greater (p<0.05) than in corn, but the ATTD for ether extract and NDF were greater (p<0.05) in corn than in DDGS. It is concluded that energy and nutrient digestibility vary among sources of DDGS even when the DDGS is procured from ethanol plants that use corn grown within a narrow geographical region. Thus, factors other than corn growing region are responsible for the variability of energy and nutrient digestibility in DDGS.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.8
• /
• pp.78-86
• /
• 2000

This study identified a linear time-invariant mathematical model of each stand of a five-stand tandem cold mill. Two model identification methods are applied to construct a linear model of each stand of the tandem cold mill. For the model identification the input-output data that have interstand interference property in tandem cold rolling are obtained from a nonlinear simulator of the tandem cold mill. And a linear model of each stand is identified with N4SD(numerical algorithms for subspace state space system identification) method based on a state-space model and Least Square algorithm based on a transfer function. Furthermore a modeling error of the tandem cold mill is quantitatively analyzed from a maximum singular value plot of error function between an identified nominal model and uncertain model. In conclusion the comparison of the output signals between the existing Taylor linearized model the identified linear model and the nonlinear model of the tandem cold mill shows the accuracy and the applicability of the proposed identified model.

• Journal of the Korean Society of Radiology
• /
• v.1 no.1
• /
• pp.25-30
• /
• 2007

ROC(Receiver Operating Characteristic)curve is the method that estimate detected insignificant signal from the human's sense of sight, it has been raised excellent results. In this study, we evaluate image quality and equipment character by obtaining a chest image from CR(Computed Radiography) and DDR(Direct Digital radiography) using the human chest phantom, The parameter of exposure for obtaining chest image was 120 kVp/3.2 mAs and the SID(Source to Image Distance) was 180cm. The images were obtained by CR(AGFA MD 4.0 General plate, JAPAN) and DDR(HOLOGIC nDirect Ray, USA). Using some pieces of Aluminum and stone for expressing regions, then attached them on the heart, lung and thoracic vertebrae of the phantom. 29 persons hold radiology degrees were participated in ROC analysis. As a result of the ROC analysis, TPF(true positive fraction) and FPF(false positive fraction) of DDR and CR are 0.552 and 0.474 and 0.629 and 0.405, respectively. By using the results, the ROC curve of CR has higher image quality than DDR. According to the theory, DDR has the higher image quality than CR in chest X-ray image. But, CR has the higher image quality than DDR. quality of DDR inserted the enhance board. The results confirmed that image post-processing is important element decipherment of clinical.