• 제목/요약/키워드: N2 rpm

검색결과 303건 처리시간 0.024초

태양광용 웨이퍼 실리콘 폐슬러지로부터 절삭유의 재생 (Recycling of Cutting Oil from Silicon Waste Sludge of Solar Wafer)

  • 엄명헌;이종집;하범용
    • 청정기술
    • /
    • 제22권4호
    • /
    • pp.274-280
    • /
    • 2016
  • 본 연구에서는 태양광용 웨이퍼를 제조하는 과정에서 발생하는 실리콘 폐슬러지의 함유물질 중 공정원가의 25% 가량을 차지하고 있는 절삭유를 화학적으로 재생하기 위한 방법을 개발하고자 하였다. 이를 위해 아세톤, HCl, NaOH, KOH, $Na_2CO_3$, 불산, 염화메틸렌 등 7종류의 시약이 이용되었으며 다양한 농도로 폐슬러지와 반응을 실시하고 3000 rpm의 속도로 60분간 원심분리를 수행하였다. 그 결과, 실리콘분말 및 금속분말과 같은 고형물과 액상의 절삭유를 분리하기 위한 최적 시약 및 조건이 0.3 N NaOH로 확인되었다. 시판되는 절삭유의 약산성 특성에 맞게 pH 조절이 요구되어 금속분말 제거에 효과적인 0.1 N HCl과 폐슬러지를 먼저 반응시킨 후 0.3 N NaOH로 후처리 한 재생 절삭유의 pH가 6.05로 나타났으며 0.3 N NaOH 단독으로 폐슬러지에 적용하였을 때 보다 우수한 탁도를 나타내었다. 시판용 절삭유와의 특성을 비교하고자 FT-IR 분석을 실시한 결과, 재생유로서의 가능성이 확인되었으며 실험을 통하여 얻어진 절삭유 회수율은 86.9%로 나타났다.

배양조건에 따른 Schizochytrium mangrovei의 성장 및 Docosahexaenoic acid의 생산특성 (Effect of Culture Conditions on Characteristics of Growth and Production of Docosahexaenoic acid (DHA) by Schizochytrium mangrovei)

  • 정우철;최병대;강석중
    • 한국수산과학회지
    • /
    • 제47권2호
    • /
    • pp.144-153
    • /
    • 2014
  • Both docosahexaenoic acid (DHA, 22:6n-3) and eicosapentaenoic acid (EPA, 20:5n-3) have attracted increasing attention since the first epidemiological report on the importance of n-3 essential fatty acids. Lipids in microbial cells play various biological roles and, consequently, much research has been carried out on their role in cell physiology. The lipid composition of microorganisms can exhibit considerable variations depending on environment. The effects of culture conditions, temperature (15, 20, 24, 28, 32 and $36^{\circ}C$), salinity (10, 20, 30, 40 and 50 psu), pH (pH5, 6, 7, 8 and 9), rotation speeds (50, 100, 150 and 200 rpm), carbon sources, nitrogen sources and C/N ratio on the production of docosahexaenoic acid, fatty-acid profiles, and acids secreted to the broth culture by the oleaginous microorganism, Schizochytrium mangrovei (KCTC 11117BP), were studied. Temperature (initially $28^{\circ}C$), salinity (20 psu), pH (pH7), rotation speeds (100 rpm), organism fatty acids, and secreted acids in the broth were varied during cultivation of S. mangrovei. At pH 7.0, S. mangrovei was able to accumulate lipids up to 40% of its biomass, with 13% (w/w) DHA content. The monosaccharides glucose and fructose, and yeast extract were suitable carbon and nitrogen sources, respectively. The primary omega-3 polyunsaturated fatty acid produced was docosahexaenoic acid.

풀루란 발효시 통기속도의 영향과 발효액의 물성에 관한 연구 (Effects of Aeration Rates and Rheological Properties of Fermentation Broth on Pullulan Fermentation)

  • 신용철;한종권;변시명
    • 한국식품과학회지
    • /
    • 제22권5호
    • /
    • pp.533-538
    • /
    • 1990
  • 풀루란 발효에서 500rpm에서 통기속도를 0.5vvm, 1.0vvm, 2.0vvm으로 증가시켰을 때 최대 비성장속도는 $0.168(hr^{-1})$에서 $0.192({hr^{-1})$로 증가되었으며 풀루란의 최대 비생산속도는 $0.046({hr^{-1})$에서 $0.093({hr^{-1})$으로 증가되었다. 풀루란 발효액의 물성은 power-law를 따르는 Pseudoplasticity를 나타냈으며 Power-law 변수들과 풀루란 농도 사이에는 $lnK(t)=ln({\tau})_o-n(t)\;ln({\gamma})_o$$K(t)=AP(t)^B$의 상관관계를 보였다.

  • PDF

질화규소 세라믹볼의 구름피로수명 (Rolling Fatigue Life of Silicon Nitride Ceramic Balls)

  • 최인혁;박창남;최헌진;이준근;신동우
    • 한국윤활학회:학술대회논문집
    • /
    • 한국윤활학회 1999년도 제29회 춘계학술대회
    • /
    • pp.119-126
    • /
    • 1999
  • The rolling fatigue lives (RFL) of five kinds of silicon nitride balls were investigated. Four kinds of Si$_3$N$_4$ balls were fabricated using different raw materials, sintering aids and sintering conditions, Commercially available Si3N4 ball was also studied for comparison. All the balls were finished up to the dimensional accuracy of Grade 10 defined in KS B 2001 (Steel Balls for Ball Bearings) with a size of 9.525mm. RFL tests were then conducted under the initial theoretical maximum contact stress 6.38 GPa and the spindle speed 10,000 rpm. Gear oil was provided by oiled race as lubricant. The results of RFL test indicated the prerequisitic conditions for the long rolling life of Si$_3$N$_4$ball : (1) the high density, (2) mjcrostructures consisted of small uniformly distributed grains, (3) little glassy phase in grainboundary, and (4) little crystalline phase and secondary phase that induces residual thermal stress due to the differences of thermal expansion coefficient with Si$_3$N$_4$Phase.

  • PDF

Electrocatalytic Reduction of Dioxygen at Glassy Carbon Electrodes with Irreversible Self-assembly of N-hexadecyl-N'-methyl Viologen

  • Lee, Chi-Woo;Jang, Jai-Man
    • Bulletin of the Korean Chemical Society
    • /
    • 제15권7호
    • /
    • pp.563-567
    • /
    • 1994
  • The electroreduction of dioxygen at glassy carbon electrodes with irreversible self-assembly of N-hexadecyl-N'-methyl viologen $(C_{16}VC_1)$ proceeds at potentials more positive than those where the reduction occurs at bare electrodes. The electrocatalyzed reduction takes place at potentials well ahead of those where the catalyst is reduced in the absence of dioxygen and the limiting currents observed at rotating disk electrodes did not deviate from the thoretical Levich line up to 6400 rpm, indicating that the electrocatalysis is extremely rapid. The rate constant for the heterogeneous reaction between $C_{16}V^+C_1$ immobilized on the electrode surface and $O_2$ in solution was estimated to be ca. $10^8\;M^{-1}s^{-1}$. The half-wave potential of dioxygen reduction was independent of solution pH.

nCode를 이용한 플래너 밀러 주축계 구조물의 피로수명에 관한 연구 (A Study on the Fatigue Life of Planer Miller Spindle System Using nCode)

  • 김재실;박필거;이성원
    • 한국산업융합학회 논문집
    • /
    • 제25권6_2호
    • /
    • pp.1091-1095
    • /
    • 2022
  • Dynamic stability of the main spindle system shall be ensured when operating the planer miller for remanufacturing the planer miller. This paper explains the analysis process that determines the stability of the planer miller spindle system in the design stage using ANSYS, an analysis program. First, the dynamic stability of the main spindle system is verified through risk speed analysis in the rated RPM range of the planer miller through ANSYS Modal Analysis, and second, the stability and durability of the main spindle system are verified through ANSYS nCode Analysis.

액체배양에 의한 Monascus rubber의 적색 색소 생산을 위한 최적 배양조건에 관한 연구 (Studies on the Optimal Culture Condition for Production of Red Pigments by Monascus rubber on Liquid Culture)

  • 서승교;이창호;우철주
    • 한국식품저장유통학회지
    • /
    • 제11권1호
    • /
    • pp.111-116
    • /
    • 2004
  • Monascus rubber KCTC 6122를 이용하여 액체 배양을 통한 실험균의 적색 색소의 생산을 위한 배양 조건의 최적화에 관한 결과는 다음과 같다. 실험 균주가 생산하는 적색색소의 최적 배양 조건은 탄소원으로 rice powder 4% 첨가, 질소원으로 NaN0$_3$ 0.2%, 인산염으로 $Na_2$HPO$_4$의 농도가 0.3%, MgSO$_4$의 농도가 0.15%일 때 가장 높은 적색 색소 생성을 나타내었다. 배양 온도는 3$0^{\circ}C$, 초기 pH가 6.5, 진탕속도를 150 rpm, 배양 시간 8일 일 때 적색 색소의 생성능이 흡광도 70.29로 가장 우수하였다.

Efficient extraction and recovery of Lignosulfonate using sunflower oil as green solvent in liquid membrane transport: Equilibrium and kinetic study

  • Kumar, Vikas;Singh, Raghubansh K.;Chowdhury, Pradip
    • Journal of Industrial and Engineering Chemistry
    • /
    • 제67권
    • /
    • pp.109-122
    • /
    • 2018
  • This work highlights extraction and removal of Lignosulfonate using sunflower oil-Tri-n-octylamine (TOA) system in bulk liquid membrane transport. Maximum extraction and recovery percentages of 92.4% and 75.2% were achieved. Optimum manifold operating conditions were: 4 vol.% TOA, $2{\pm}0.1$ feed phase pH, 300 rpm stirring speed, at $40^{\circ}C$ with 0.2 (M) $Na_2SO_4$ solution. 1:2 (organic/aqueous) and 1:1 (aqueous/aqueous) phase ratios produced best results. Extraction (36.85 kJ/mol) was found to be intermediate controlled and stripping (54.79 kJ/mol) was chemical reaction controlled. Kinetic estimation of data with higher rate constants for stripping vis-${\grave{a}}$-vis extraction showed latter to be rate determining.

4D-CT와 호흡동조시스템을 이용한 간암 환자의 방사선치료 표적 움직임 분석 (Target motion analysis of the respiratory gated guided radiotherapy in liver cancer patients using 4D-CT)

  • 동경래;박병수;김새싹;권대철;구은회;정운관
    • Journal of Radiation Protection and Research
    • /
    • 제35권2호
    • /
    • pp.63-68
    • /
    • 2010
  • 방사선치료의 최대 목표는 정상조직을 보호하고 종양부위에 방사선량을 충분히 조사하는 것이다. 그 중에서 환자호흡에 의한 문제점을 보안하기 위해 환자호흡에 따른 주기적 움직임을 분석하여 안정된 일정영역에서만 방사선이 조사되도록 하는 호흡동조방사선치료 방법이 임상에서 활용되고 있다. 본 논문은 특히 호흡에 의해 움직임 영향을 많이 받는 간암 환자 40명을 대상으로 실제 방사선 치료 계획에 이용되는 4D-CT와 호흡동조방사선 치료에 사용하는 RPM을 이용하여 간암의 움직임을 환자의 나이, 성별 및 움직임 방향으로 나누어 분석하였다. 움직임의 변화는 방향으로는 right-left($3.19{\pm}1.29$), anteroposterior($5.44{\pm}2.07$), craniocaudal($12.54{\pm}4.70mm$)이었고, 이는 성별과 관련이 없고 나이가 고령일수록 움직임이 크다는 것을 알 수 있다. 따라서 호흡에 의해 움직임으로 인한 치료부위의 방향이 변화가 생김으로 RPM 호흡동조방사선 치료로 움직임에 대한 보정을 실시하여 간암 치료에서 치료효과를 높일 수 있다.

바이오 디젤 적용에 따른 대형엔진의 배출가스 특성 (The Emission Characteristics of Bio-Diesel Fuel in Heavy-Duty Engine)

  • 김선문;엄명도;홍지형
    • 한국대기환경학회지
    • /
    • 제26권5호
    • /
    • pp.499-506
    • /
    • 2010
  • Recently, a great deal of attention have been directed to the use of alternative fuels as a means to reduce vehicular emissions. As one of the promising alternative fuels, bio-diesel has advantages of a wide adaptability without retrofit of diesel engine. It is also effective enough to reduce CO, THC, $SO_x$, polycyclic aromatic hydrocarbons (PAHs) and PM. In this study, we investigated the emission characteristics of biofuels between different operating conditions, i.e., engine speed (1,400 rpm and 2,300 rpm), engine load (10% and 100%), bio-diesel blending (BD0, BD5 and BD20), and recirculation (EGR) rate of exhaust gas (0% and 20%). Relative performance of the system was evaluated mainly for the greenhouse gases ($CH_4$, $N_2O$ and $CO_2$). In addition, emission characteristics of ND-13 mode were also tested against both greenhouse gases and other airborne pollutants under emission regulation. The relative composition of bio-diesel has shown fairly clear effects on the emission quantities of CO, THC, and PM emission, although it was not on $NO_x$ and greenhouse gases. EGR rate has shown trade-off characteristics between $NO_x$ and PM.