• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 하계학술대회 논문집
• /
• pp.154-157
• /
• 1990

This paper describes a new method of calculating expected energy generation and loss of load probability (L.O.L.P) for electric power system operation and expansion planning. The method represents an equivalent load duration curve (E.L.D.C) as a mixture of cumulants approximation (M.O.C.A), which is the general case of mixture of normals approximation (M.O.N.A). By regarding a load distribution as many normal distributions-rather than one normal distribution-and representing each of them in terms of Gram-Charller expansion, we could improve the accuracy of results. We developed an algorithm which automatically determines the number of distribution and demarcation points. In modelling of a supply system, we made subsets of generators according to the number of generator outage: since the calculation of each subset's moment needs to be processed rapidly, we futher developed specific recursive formulae. The method is applied to the test systems and the results are compared with those of cumulant, M.O.N.A and Booth-Baleriaux method. It is verified that the M.O.C.A method is faster and more accurate than any other methods.

• 한국구조물진단유지관리공학회 논문집
• /
• 제3권1호
• /
• pp.171-178
• /
• 1999

Despite of decrease in shear and moment strengths, most steel structural designers use web openings in beams because of economical benefit and requirement. The purpose of this study is to suggest the method of reinforcement of H-shape steel beams with a rectangular web opening. If shear predominates over bending, it is necessary to consider all possible combinations of shear force and bending moment acting at the opening. In this paper, the ultimate strength and behavior of perforated beams have been investigated according to parameters (ratio of M/V, opening width within opening height ratio D/h, various reinforcing types A/B/C/D/M/N/W). The results of this study are as follows ; 1. Deformation of H-shape steel beams with a rectangular web opening was greatly affected by not only bending but also shear. 2. SB1-2/3 series have little difference in the reinforced efficiency, but SB1-2E/3E series have difference in the reinforced efficiency according to the reinforcement type. 3. Efficiency of SB1-2E/3E series is determined by reinforcing types, which RB1-2E-B/M/C and RB1-3E-M/D/C specimens have good efficient. Reinforcing type of perforated beams chooses efficient method according to ratio of M/V and D/h.

• 한국재료학회지
• /
• 제10권8호
• /
• pp.575-580
• /
• 2000

Ta(TaC) 필라멘트를 이용한 HF-CVD 법에 의하여 $Si_3N_4$, SiC, WC, $Al_2O_3$를 기판으로 다이아몬드 박막을 증착하고, 그 밀착특성을 평가하였다. 로내의 $CH_4$농도를 10%로 높게 하였을 경우에는 막중에 graphitic(amorphous) carbon이 생성됨을 확인할 수 있었다. 박막을 $12\mu\textrm{m}$ 정도까지 두껍게 하면, WC기판에서는 부분적 박리형상이 관찰되었으나, $Si_3N_4$를 기판으로 하였을 경우에는 안정한 박막을 얻을 수 있었다. Indentation test 결과로부터 grainding에 의한 기판표 처리가 밀착성 향상에 효과적이라는 것을 알 수 있었다. 또 compression topple test에서는 박막의 두께는 밀착성과 반비례의 관계를 가지는 것을 알 수 있었다. 수 있었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제26권11호
• /
• pp.1529-1535
• /
• 2013

The TBC1D1 plays a key role in body energy homeostasis by regulating the insulin-stimulated glucose uptake in skeletal muscle. The present study aimed to identify the association between genetic polymorphisms of TBC1D1 and body weight (BW) in rabbits. Among the total of 12 SNPs detected in all 20 exons, only one SNP was non-synonymous (c.214G>A. p.G72R) located in exon 1. c.214G>A was subsequently genotyped among 491 individuals from two rabbit breeds by the high-resolution melting method. Allele A was the predominant allele with frequencies of 0.7780 and 0.6678 in European white rabbit (EWR, n = 205) and New Zealand White rabbit (NZW, n = 286), respectively. The moderate polymorphism information content (0.250.05). Our results implied that the c.214G>A of TBC1D1 gene might be one of the candidate loci affecting the trait of 35 d BW in the rabbit.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.521-524
• /
• 2001

In this letter. we report on the investigation of Ti. Pt/Si/Ti Ohmic contacts to p-type 4H-SiC. The contacts were formed by a 2-step vacuum annealing at $500^{\circ}C$ for 1h. $950^{\circ}C$ for 10 min respectively. The contact resistances were measured using the transmission line model method. which resulted in specific contact resistivities in the $3.5{\times}10^{-3}$ and $6.2{\times}10^{-4}ohm/cm^{2}$, and the physical properties of the contacts were examined using x-ray diffraction. microscopy. AES(auger electron spectroscopy). AES analysis has shown that, at this anneal temperature, there was a intermixing of the Ti and Si. migration of into SiC. Overlayer of Pt had the effect of decreasing the specific contact resistivity and improving the surface morphology of the annealed contact.

• Archives of Pharmacal Research
• /
• 제27권4호
• /
• pp.390-395
• /
• 2004

The methanol extract obtained from the aerial parts of Aceriphyllum rossii (Saxifragaceae) was fractionated into ethyl acetate (EtOAc), n-BuOH and $H_2O$ layers through solvent fractionation. Repeated silica gel column chromatography of EtOAc and n-BuOH layers afforded six flavonol glycosides. They were identified as kaempferol 3-O-$\beta$-D-glucopyranoside (astragalin, 1), quercetin 3-O-$\beta$-D-glucopyranoside (isoquercitrin, 2), kaempferol 3-O-$\alpha$-L-rhamnopyranosyl $(1{\to}6)-\beta$-D-glucopyranoside (3), quercetin 3-O$\alpha$-L-rharnnopyranosyl $(1{\to}6)-\beta$-D-qlucopyrano-side (rutin, 4), kaempferol 3-O-[$\alpha$-L-rharnnopyranosyl $(1{\to}4)-\alpha$-L-rhamnopyranosyl $(1{\to}6)-\beta$-D-glucopyranoside] (5) and quercetin 3-O-[$\alpha$-L-rhamnopyranosyl $(1{\to}4)\alpha$-L-rhamnopyranosyl $(1{\to}6)\beta$-D-glucopyranoside] (6) on the basis of several spectral data. The antioxidant activity of the six compounds was investigated using two free radicals such as the ABTS free radical and superoxide anion radical. Compound 1 exhibited the highest antioxidant activity in the ABTS $\{2,2-azinobis-(3-ethylbenzothiazoline-6-sulfonic acid)\}$ radical scavenging method. 100 mg/L of compound 1 was equivalent to $72.1\pm1.4\;mg/L$ of vitamin C, and those of compounds 3 and 5 were equivalent to $62.7\pm0.5\;mg/L$ and $54.3\pm1.3\;mg/L$ of vitamin C, respectively. And in the superoxide anion radical scavenging method, compound 5 exhibited the highest activity with an $IC_{50}$ value of $17.6{\pm}0.3{\mu}M$. In addition, some physical and spectral data of the flavonoids were confirmed.

• 한국세라믹학회지
• /
• 제41권1호
• /
• pp.30-35
• /
• 2004

스크린 인쇄법 및 PZT sol 처리의 복합공정을 적용하여 $30{\mu}m$ 두께의 PMW-PZT 후막을 Pt/$TiO_2$/$SiN_x$Si 기판위에 제작하였다. 그 결과 PZT sol 처리 횟수가 증가함에 따라 후막의 소결 밀도가 증가하고 전기적, 압전 특성의 증진되는 것을 관찰할 수 있었다. $800^{\circ}C$에서 소결한 10회 sol 처리한 PMW-PZT 후막은 745의 유전상수 및 155 pC/N의 $d_33$ 값을 나타내었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 일렉트렛트 및 응용기술
• /
• pp.177-180
• /
• 2002

The purpose of this thesis is to develope buffer materials by the plasma polymerization method. In this article the buffer materials, plasma poly thiophene(PPTh) is used to study the interface of eter/organic in organic light emitting diodes(OLED). The interface of meter/organic materials is the important and critical objectives in development of OLED. The hole transport layer was N,N'-dipheneyl-N, N'bis-(3-methypheneyl)-1,1'dipheneyl-4,4'-diamine (TPD); the host material of mission layer was 8-tris-hydroxyquinoline aluminium (Alq3). When PPTh was inserted between ITO and TPD, emission efficiency increased.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.222-227
• /
• 2004

Under cyclic loading, the fatigue failures of welded joints occur at weld toes which induce stress concentration by weld shape. So we need to obtain the peak stress and the S-N curve to assess the fatigue strength of welded joints. However the measurement of peak stress is of high uncertainty and low reproducibility, so we use nominal stress instead in fatigue tests of welded joints. In this study, fatigue tests to obtain S-N curves and FE analyses to obtain stress concentration factors were conducted for the two types of cruciform fillet welded joints, that is, load-carrying and non load-carrying types. Then we changed the obtained S-N curves to that based on peak stress using the hot-spot stress concept. From the analyses of the S-N curves obtained, we have concluded that there is a need to develop a new method to evaluate the fatigue life.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 A
• /
• pp.338-340
• /
• 1993

In this paper, the method for designing a robust linear multivariable model following servo system is proposed. This model following servo system for the (n)th order reference input and the (n)th order disturbance is treated, and is designed so that the (n)th order response of the plant should be kept close to the (n)th order response of the given model by LQ(Linear Quadratic) optimal regulator approach. It is proved that the characteristics of the model following servo system is robust in the presence of the disturbances and the parameter perturbations of the plant dynamics.