• Journal of Chest Surgery
• /
• v.22 no.1
• /
• pp.67-73
• /
• 1989

Forty two patients with chronic constrictive pericarditis, who were admitted to the Yonsei University College of medicine over a period of 18 years from January, 1970 to August, 1988, were analyzed retrospectively. Mean age of the patient was 33.5 year ranging from 6.8 to 60 years old. Male to female ratio was 1.3 to 1. Twenty-one cases [50%] were tuberculous origin [based on either associated pulmonary tuberculosis and/or caseous necrosis in thickened pericardial specimen] and 17 cases [40.5%] were idiopathic [non specific chronic inflammatory change was considered to be idiopathic]. Dyspnea on exertion was evident in 30 cases [71.4%] and abdominal distention in 21 cases [50%]. On physical examination, hepatomegaly [83.3%], neck vein distention [54.8%], distant heart sound [47.6%] and ascites were found. Thirty-nine patients showed low voltage of QRS and/or T wave flattening or inversion on EKG. Thirty-one cases had undergone cardiac catheterization which showed data compatible with chronic constrictive pericarditis. Midsternostomy group [n=15] had shown the most remarkable CVP decline [12.20 mmHg] as compared with bilateral submammary incision group [n=25, 8.96 mmHg] and left thoracotomy group [n=2, 7.75 mmHg] but difference was not significant statistically There was four early death among 42 patients [9.5%] including 3 cases of left ventricular failure and one cardiac tamponade. Main postoperative complications were wound infection [6 cases] and arrhythmia [3 cases]. Follow-up of 24 patients [mean; 55.3 months, ranging from 2 months to 155 months] revealed good functional status.

• Bulletin of the Korean Mathematical Society
• /
• v.56 no.1
• /
• pp.57-71
• /
• 2019

Let R be an associative ring with identity, M a t.u.p. monoid with only one unit and ${\omega}:M{\rightarrow}End(R)$ a monoid homomorphism. Let R be a reversible, M-compatible ring and ${\alpha}=a_1g_1+{\cdots}+a_ng_n$ a non-zero element in skew monoid ring $R{\ast}M$. It is proved that if there exists a non-zero element ${\beta}=b_1h_1+{\cdots}+b_mh_m$ in $R{\ast}M$ with ${\alpha}{\beta}=c$ is a constant, then there exist $1{\leq}i_0{\leq}n$, $1{\leq}j_0{\leq}m$ such that $g_{i_0}=e=h_{j_0}$ and $a_{i_0}b_{j_0}=c$ and there exist elements a, $0{\neq}r$ in R with ${\alpha}r=ca$. As a consequence, it is proved that ${\alpha}{\in}R*M$ is unit if and only if there exists $1{\leq}i_0{\leq}n$ such that $g_{i_0}=e$, $a_{i_0}$ is unit and aj is nilpotent for each $j{\neq}i_0$, where R is a reversible or right duo ring. Furthermore, we determine the relation between clean and nil clean elements of R and those elements in skew monoid ring $R{\ast}M$, where R is a reversible or right duo ring.

• Journal of Korean Society for Atmospheric Environment
• /
• v.13 no.1
• /
• pp.9-18
• /
• 1997

Precipitation samples were collected by the wet- only event sampling method from Seoul during September 1991 to April 1995. These samples were analyzed for the concentrations of the major ionic components (N $O_3$$^{[-10]}$ , N $O_2$$^{[-10]}$ , S $O_4$$^{2-}$, C $l^{[-10]}$ , $F^{[-10]}$ , N $a^{＋}$, $K^{+}$, $Ca^{2＋}$, $Mg^{2＋}$, and N $H_4$$^{＋}$), pH, and electric conductivity. During the study period, a total of 182 samples were collected, but only 163 samples were used for the data analysis via quality assurance of precipitation chemistry data. The volume-weighted pH was found to be 4.7. The major acidifying species from our precipitation studies were identified to be non-seasalt sulfate (84$\pm$9 $\mu$eq/L) and nitrate (24$\pm$2 $\mu$eq/L) except for chloride. Because the Cl/Na ratio in the precipitation was close to the ratio in seawater. If all of the non-seasalt sulfate and nitrate were in the form of sulfuric and nitric acids, the mean pH in the precipitation could have been as low as 3.7 lower than the computed value. Consequently, the difference between two pH values indicate that the acidity of precipitation was neutralized by alkaline species. The equivalent concentration ratio of sulfate to nitrate was 3.5, indicating that sulfuric and nitric acids can comprise 78％ and 22％ of the precipitation acidity, respectively. Analysis of temporal trend in the measured acidity and ionic components were also performed using the linear regression method. The precipitation acidity generally showed a significantly decreasing trend, which was compatible with the pattern of the ratio (N $H_4$$^{＋}$＋C $a^{2＋}$)/ (nss-S $O_4$$^{2-}$＋N $O_3$$^{[-10]}$ ).).

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.34 no.2
• /
• pp.230-236
• /
• 2008

Purpose: This study was performed to investigate the incidence, types of fracture, treatment, associated fracture and complications in patients with nasal bone fracture. Materials and methods: Clinical examination, patient's records and radiographic images were evaluated in 230 cases of nasal bone fractures who were treated at the Department of Oral and Maxillofacial Surgery, Chonnam National University Hospital for recent 5 years; from January 2002 to December 2006. Results: 1. The age of patient was ranged from 4 to 77 years (mean age=36.6 years); Males was 75.7% (n=174), and females 24.3% (n=56). 2. The cause of the nasal bone fracture in this study was a fall or slip down (28.8%, n=66), sports accident (26.0%, n=60), fighting (21.3%, n=49), traffic accident (9.6%, n=22), industrial trauma (7.8%, n=18), and the others (6.6%, n=15). 3. For the patterns of fracture, simple fracture without displacement occured in 10.4% (n=24). Simple fracture with displacement without septal bone fracture was found in 49.5% (n=114). Simple fracture with displacement in company with septal bone fracture showed in 32.6% (n=75). Commiuted fracture with severe depression was presented in 7.4% (n=17). 4. The reduction the displaced nasal bone was carried out in 2 to 10 days (mean 6.8 days) after the injury. 5. Nasal bone fracture associated with Le Fort I fracture (6.5%, n=6.5), Le Fort II fracture (7.4%, n=17), Le Fort III fracture (1.3%, n=3), NOE fracture (13.9%, n=32), ZMC fracture (17.4%, 40), maxillary bone fracture (8.3%, n=19), orbital blow-out fracture (15.7%, n=36), frontal bone fracture (1.3%, n=3) and alveolar bone fracture (10.9%, n=25). 6. The major type of treatment method was closed reduction in 90% (n=207), open reduction in 3% (n=7), and observation in 7% (n=16). 7. There were some complications such as ecchymosis, hyposmia, hypo esthesia and residual nasal deformity which are compatible. Open rhino-plasty was conducted for 3 patients who had residual nasal deformity. Conclusions: These results suggest that most of nasal bone fractures are occurred physically active aged groups(age 10-49 years) and could be treated successfully with closed reduction at 7 days after the injury.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.4
• /
• pp.103-109
• /
• 2007

This paper presents behavioral models using SIMULINK and Verilog-a for a PLL based fractional-N frequency synthesizer. By adopting a top-down approach along with the traditional bottom-up transistor level design in parallel, the design time is greatly shortened, and a co-verification method for both the digital and the analog part is considered. Under this consideration, the SIMULINK modeling reduces simulation time and easily estimates the PLL's performance on the top level. Verilog-a is able to verify the feasibility of each blocks at first hand because it is compatible with transister level circuits. Then, an efficient way of the design is presented by comparing the results of both models.

• Journal of the Korean Ceramic Society
• /
• v.31 no.9
• /
• pp.995-1004
• /
• 1994

Phase relation and microwave dielectric properties of the system BaO.(Nd1-xSmx)2O3.TiO2 (n=4, 5) were studied. With n=5 (1 : 1 : 5), Ba2Ti9O20 and TiO2 formed in case of X$\leq$0.7, and Ba2Ti9O20 and Sm2Ti2O7 formed at X=1.0 as the second phases dispersed in fine-grained orthorhombic matrix phase. With n=4 (1 : 1 : 4). on the contrary, only fine grains of an ortho-rhombic phase were observed irrespective of Nd/Sm ratio. The compositions of these two stable orthorombic phases having distinct lattic constants even with the same Nd/Sm ratio were estimated as 4BaO.5(Nd1-xSmx)2O3.18TiO2 and BaO.(Nd1-xSmx)2O3.4TiO2 with n=5 and n=4 in the system BaO.(Nd1-xSmx)2O3.TiO2, respectively. Consequently the composition BaO.(Nd1-xSmx)2O3.5TiO2 lies in the compatible triangle of 4BaO.5(Nd1-xSmx)2O3.18TiO2 and the second phases mentioned above. The microwave dielectric properties (~4 GHz) of BaO.(Nd1-xSmx)2O3.5TiO2 can be controlled effectively by adjusting Sm content : with increasing X from 0 to 0.7, both dielectric constant and the temperature coefficient of resonant frequency decreased monotonically from 82 to 65 and from 91 (ppm/$^{\circ}C$) to -19(ppm/$^{\circ}C$), respectively, while unloaded Q(Qo) remained constant at about 2,600.

• Journal of the Korean Society of Safety
• /
• v.25 no.3
• /
• pp.78-82
• /
• 2010

This study is to test insulation mortar mixed with wastepaper and sawdust to find out its insulation performance. Therefore, wastepaper and sawdust have been added to normal mortar. They are analyzed for the above purpose using compressive strength and insulation performance. It is found that the more wastepaper and sawdust will be mixed, the lower heat conductivity will be taken. Wastepaper and sawdust mixture will be more 2.0% then the insulation mortar quality can be compatible with the 3rd kind of the standard. Optimal mixture for insulation will be wast paper:sawdust=4:6. Cohesive test of materials showed that test material has stronger than stand are $0.10N/mm^2$. It is satisfactory the test result showed a range of $0.12{\sim}0.15N/mm^2$ from the test result. Optimal mixture of wastepaper and sawdust have been found out from the study comprehensively, exclusive of the proportion of wastepaper:sawdust = 8:2. It is thought that standard of length deformation; 0.5% is reasonable. This means that deformation of mortar itself can be considered. But it is also Shown that water mixture has also been sharply changed at first flow test. Therefore, it is thought that absorbed water content in the material gave considerable effect to variation rate.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.216-220
• /
• 2006

In this study, it was investigated that the characteristics of startup and compatibility using several type hot and cold gases. The characteristics of starting LRE by pyro starter was compared with that by a He spinner. The compatibility of pyre gas, a gaseous He, H2+N2 mixture gas, and air was investigated by a simple 1D turbine analysis considered the properties of each gases and turbine efficiency. Most of them were compatible to start up the LRE but air was properly used only when the turbine was low power mode.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.955-962
• /
• 2005

Power efficiency, lifetime and stable manufacturing processes are the crucial parameters for the success of organic light emitting diodes (OLEDs) in display and lighting applications. Highest power efficiencies of PIN-OLEDs for all principal colours and for bottom and top emission OLED structures have been demonstrated. The PIN structure, which means the incorporation of intentionally doped charge carrier transport layer in a suitable OLED layer setup, lowers the operating voltage to achieve highest power efficiencies. Up to now the n-doping of the electron transport layer has been done by alkali metal co-deposition. This has main draw-backs in terms of manufacturability, since the handling of large amounts of pure Cs is a basic issue in production lines. Here we present in detail results on PIN-OLEDs comprising a newly developed molecular n-dopant. All the previous OLED performance data based on PIN-OLEDs with alkali metal doping could be reproduced and will be further improved in the future. Hence, for the first time, a full manufacturing compatible PIN-OLED is available.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.3
• /
• pp.274-283
• /
• 2014

In this paper, the epi layer of npn SOI HBT with n+ buried layer has been studied through Sentaurus process and device simulator. The doping value of the deposited epi layer has been varied for the npn HBT to achieve improved $f_tBV_{CEO}$ product (397 GHzV). As the $BV_{CEO}$ value is higher for low value of epi layer doping, higher supply voltage can be used to increase the $f_t$ value of the HBT. At 1.8 V $V_{CE}$, the $f_tBV_{CEO}$ product of HBT is 465.5 GHzV. Further, the film thickness of the epi layer of the SOI HBT has been scaled for better performance (426.8 GHzV $f_tBV_{CEO}$ product at 1.2 V $V_{CE}$). The addition of this HBT module to fully depleted SOI CMOS technology would provide better solution for realizing wireless circuits and systems for 60 GHz short range communication and 77 GHz automotive radar applications. This SOI HBT together with SOI CMOS has potential for future high performance SOI BiCMOS technology.