• Journal of Sensor Science and Technology
• /
• v.19 no.3
• /
• pp.209-213
• /
• 2010

This paper describes the fabrication and characteristics of AlN piezoelectric MPG(micro power generator). The micro energy harvester was fabricated to convert ambient vibration energy to electrical power as a AlN piezoelectric cantilever with Si proof-mass. To be compatible with CMOS process, AlN thin film was grown at low temperature by RF magnetron sputtering and micro power generators were fabricated by MEMS technologies. X-ray diffraction pattern proved that the grown AlN film had highly(002) orientation with low value of FWHM(full width at the half maximum, $\theta=0.276^{\circ}$) in the rocking curve around(002) reflections. The implemented harvester showed the $198.5\;{\mu}m$ highest membrane displacement and generated 6.4 nW of electrical power to $80\;k{\Omega}$ resistive load with $22.6\;mV_{rms}$ voltage from 1.0 G acceleration at its resonant frequency of 389 Hz. From these results, the AlN piezoelectric MPG will be possible to suitable with the batch process and confirm the possibility for power supply in portable, mobile and wearable microsystems.

• Communications of the Korean Mathematical Society
• /
• v.35 no.2
• /
• pp.401-415
• /
• 2020

It is well-known that if char𝕜 = 0, then an Artinian monomial complete intersection quotient 𝕜[x₁, …, x_n]/(x₁^a₁, …, x_n^a_n) has the strong Lefschetz property in the narrow sense, and it is decomposed by the direct sum of irreducible 𝖘𝖑₂-modules. For an Artinian ring A = 𝕜[x₁, x₂, x₃]/(x₁⁶, x₂⁶, x₃⁶), by the Schur-Weyl duality theorem, there exist 56 trivial representations, 70 standard representations, and 20 sign representations inside A. In this paper we find an explicit basis for A, which is compatible with the S₃-module structure.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.2 no.4
• /
• pp.295-301
• /
• 2002

In this paper, solenoid-type 3-D passives (inductors and transformers) have been designed, fabricated, and characterized by using electroplating techniques, wire bonding techniques, multi-layer thick photoresist, and low temperature processes which are compatible with semiconductor circuitry fabrication. Two different fabrication approaches are performed to develop the solenoid-type 3-D passives and relationship of performance characteristics and geometry is also deeply investigated such as windings, cross-sectional area of core, spacing between windings, and turn ratio. Fully integrated inductor has a quality factor of 31 at 6 GHz, an inductance of 2.7 nH, and a self resonant frequency of 15.8 GHz. Bonded wire inductor has a quality factor of 120, an inductance of 20 nH, and a self resonant frequency of 8 GHz. Integrated transformers with turn ratios of 1:1 and n:l have the minimum insertion loss of about 0.6 dB and the wide bandwidth of a few GHz.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.114-114
• /
• 2011

We report a high-performance and air-stable flexible and invisible semiconductor which can be substitute for the n-type organic semiconductors. N-type organic-inorganic nanohybrid superlattices were developed for active semiconducting channel layers of thin film transistors at low temperature of $150^{\circ}C$ by using molecular layer deposition with atomic layer deposition. In these nanohybrid superlattices, self-assembled organic layers (SAOLs) offer structural flexibility, whereas ZnO inorganic layers provide the potential for semiconducting properties, and thermal and mechanical stability. The prepared SAOLs-ZnO nanohybrid thin films exhibited good flexibility, transparent in the visible range, and excellent field effect mobility (> 7cm2/$V{\cdot}s$) under low voltage operation (from -1 to 3V). The nanohybrid semiconductor is also compatible with pentacene in p-n junction diodes.

• Molecules and Cells
• /
• v.24 no.1
• /
• pp.45-59
• /
• 2007

We describe the gene expression profile of third leaves of rice (cv. Nipponbare) seedlings subjected to salt stress (130 mM NaCl). Transcripts of Mn-SOD, Cu/Zn-SOD, cytosolic and stromal APX, GR and CatB were up-regulated, whereas expression of thylakoid-bound APX and CatA were down-regulated. The levels of the compatible solute proline and of transcripts of its biosynthetic gene, ${\Delta}^1$-pyrroline-5-carboxylate synthetase (P5CS), were strongly increased by salt stress. Interestingly, a potential compatible solute, ${\gamma}$-aminobutyric acid (GABA), was also found to be strongly induced by salt stress along with marked up-regulation of transcripts of GABA-transaminase. A dye-swap rice DNA microarray analysis identified a large number of genes whose expression in third leaves was altered by salt stress. Among 149 genes whose expression was altered at all the times assayed (3, 4 and 6 days) during salt stress, there were 47 annotated novel genes and 76 unknown genes. These results provide new insight into the effect of salt stress on the expression of genes related to antioxidant enzymes, proline and GABA as well as of genes in several functional categories.

• Journal of Sericultural and Entomological Science
• /
• v.43 no.2
• /
• pp.109-115
• /
• 2001

Silk sericin protein was extracted by treatment with enzyme or NaOH solution from raw silk and culled-cocoon shell. The extracted sericin was characterized and examined the functional properties as well as subjective properties for its use as a soap and a body cleaner. The optimum extraction conditions on specimen are NaOH (0.02 wt.%) or enzyme, Flavourzyme 3% under N2 gas. Molecular weights of sericin was decreased by treatment with enzyme, Actinase, from 10,000-30,000 to 2,700-4,200. Sericin showed important bioactive properties, for instance, lowering effect on blood glucose and alcohol. Subjective test of sericin soap and body cleaner showed superior in washability, foamability, and skin hydration, etc., to commercial soap and body cleaner. Therefore, it is thought that silk sericin can be expected as the source of bioactive and skin-compatible materials.

• The Journal of Advanced Prosthodontics
• /
• v.14 no.2
• /
• pp.70-77
• /
• 2022

PURPOSE. This study evaluated screw loosening and 3D crown displacement after cyclic loading of implant-supported incisor crowns cemented with original titanium bases or with three compatible, nonoriginal components. MATERIALS AND METHODS. A total of 32 dental implants were divided into four groups (n = 8 each): Group 1 used original titanium bases, while Groups 2-4 used compatible components. The reverse torque value (RTV) was evaluated prior to and after cyclic loading (1,200,000 cycles). Samples (prior to and after cyclic loading) were scanned with a microcomputed tomography (micro-CT). Preload and postload files were superimposed by 3D inspection software, and 3D crown displacement analysis was performed using root-mean-square (RMS) values. All datasets were analyzed using one-way ANOVA and Tukey's post hoc analysis. RESULTS. Significant variations were observed in the postload RTV, depending on the titanium base brand (P < .001). The mean postload RTVs were significantly higher in Groups 1 and 2 than in the other study groups. While evaluating 3D crown displacement, the lowest mean RMS value was shown in the original Group 1, with the highest RMS value occurring in Group 4. CONCLUSION. Within the limitations of this in vitro study and under the implemented conditions, it was concluded that the manufacturer brand of the titanium base significantly influenced screw loosening following the fatigue test and influenced 3D crown displacement after cyclic loading.

• Journal of applied mathematics & informatics
• /
• v.16 no.1_2
• /
• pp.453-459
• /
• 2004

A left-invariant flat Riemannian connection on a Lie group makes its Lie algebra a left symmetric algebra compatible with an inner product. The left symmetric algebra is decomposed into trivial ideal and a subalgebra of e(l). Using this result, the Lie group is embedded isomorphically into the direct product of O(l) $\times$ $R^{k}$ for some nonnegative integers l and k.

• Proceedings of the KIEE Conference
• /
• 2002.04a
• /
• pp.123-125
• /
• 2002

To simulate the characteristics of an High-Intensity Discharge Lamp, this paper uses PSpice circuit model which have been developed from modification of the classical Cassie and Mayr equations. The model is for an High-Intensity Discharge Lamp and compatible to adopt high-frequency electric ballast. This model is correspond to some conditions between the simulated and experimental results.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1991.04a
• /
• pp.334-340
• /
• 1991

The information with regard to the working rance of lathe, cutting tool, cutting condition is managed as detabase system for turning operation. Date with regard to the working range of lathe, cutting tool, cutting condition are stroed by the DBMS(Data Base Management System) and can be added, modified, deleted and retrieved. Data stored in database system are searched to select the most proper cutting tool and cutting condition with the input data fed from the design stage. The system developed in this work is operated by the pull down menu on the IBM PC/AT personal computer, or compatible series.