• Proceedings of the KIPE Conference
• /
• 2019.11a
• /
• pp.160-161
• /
• 2019

본 논문에서는 Si-MOSFET 및 GaN-HEMT 기반 All Metal Induction Cooktop의 고효율 동작을 위한 공진네트워크 설계 및 운전주파수영역을 제시한다. 이를 위해 워킹 코일과 용기의 등가 파라미터를 바탕으로 동작 주파수에 따른 공진 네트워크를 각각 설계한다. 또한 시뮬레이션 및 수학적 계산을 통해 설계된 시스템의 주파수 조건 별 손실 비교를 통해 각 스위칭 소자에 따른 적합한 공진네트워크 설계방안을 제시한다.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.5
• /
• pp.602-608
• /
• 1999

멀티미디어 서비스를 제공하는 미래의 이동통신 시스템에서는 데이터의 신뢰성 있는 전송을 위해 물리 계층에서 제공하는 프레임 에러율을 감소시켜야한다. 이를 위해 라디오링크프로토콜(RLP : radio link protocol) 계층에서는 ARQ(automatic repeat request)기법을 사용한다. 본 논문에서는 멀티미디어 서비스를 제공하는 차세대 이동통신 시스템에 적용될수 있는 새로운 SR(Selective repeat) ARQ 기법을 제안하고 그 성능을 분석한다. 제안하는 SR 기법은 재전송이 반복될수록 NAK(negative acknowledge)수와 재전송 프레임수를 지수적으로 (exponentially)증가시킴으로써 프레임손실확률을 감소시킨다. 또한 제안한 SR 기법의 성능을 기존의 전형적인 SR 기법 및 IS-707의 SR 기법과 비교하였다. 비교결과, 제안한 SR 기법은 프레임 손실 확률과 프레임 전송지연 측면에서 다른 두 비교대상 Sr 기법들에 비해 더 나은 성능을 제공한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.12
• /
• pp.1824-1833
• /
• 2016

In this paper, we propose networked airborne relay-based positioning scheme (N-ARPS) based on time division multiple access (TDMA) networks to improve the performance of relative navigation (RelNav). To integrate the ARPS into TDMA, there are three problems such as slot allocation, selection of airborne relays, and method for signal loss to be solved. A subframe of N-ARPS is designed to assign the slots for broadcast and relay of navigation signals consecutively to minimize the effect of mobility. The selection algorithm determines the optimum set of airborne relays by selecting evenly distributed nodes depending on their distances to the master station. Finally, we uses precise position location information (PPLI) messages, which are received in data transmission period, to estimate a user position when the navigation signals are missing. The simulation results indicate that N-ARPS significantly improves user accuracy over RelNav.

• Geotechnical Engineering
• /
• v.13 no.1
• /
• pp.169-182
• /
• 1997

It is known that some amount of loss in impact energy takes place due to some limitations and problems during the performance of the field SPT. Actual energy level tractsferred to the rod should be measured to correct the SPT-N values tested in the field In this paper, the ratio of energy transferred to the rod through the anvil to impact energy is measured by using sharpy impact test equipment and also analysed by using GRL-WEAP This result is certified and compared with that of field SPT As the results of this study, the average rod energy ratio of the R-P hammer and the Trip hammer is calculated at 0.726 and 0.728 respectively, but it is suggested that 0.72 should be used. By using the hammer energy ratio 64.2% and 75.0% obtained from field measurement, the average energy ratio of the SPT for the R-P hammer is calculated at 46.7% and 54.5% for the Trip hammer.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.1
• /
• pp.231-238
• /
• 2019

In this paper, we have studied how to improve the amplifiers efficiency by minimizing the combining loss when several unit power amplifiers are combined to obtain high output power. Specifically, we have developed Ka-band Spatial Combining Amplifier. The fabricated Spatial Combining Amplifier is a Ka-band 20W class SSPA, which uses a 5W class unit amplifier module 8EA designed using a GaN bare die. We also combined The unit amplifier module using 8-way spatial divider and combiner with a hybrid radial structure. The output combining loss of the fabricated spatial coupler is about 0.334dB, which is about 92.6% efficiency. In this paper, we developed a Spatial Combining Amplifier with a maximum saturation output of 10W and a power addition efficiency of over 15%. As a result, we achieved the maximum saturation output of 30W and the power addition efficiency of 19%.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.2 no.3
• /
• pp.51-57
• /
• 1997

A new current controlled PWM technique with N.P.C structure is proposed in this paper. A current controlled PWM technique with neutral-point-clamped pulsewidth modulation inverter composed of main switching devices which operates as switches for PWM and auxiliary switching devices to clamp the output terminal potential to the neutral point potential is described. This inverter output contains less harmonic content as compared with that of a conventional current controlled PWM type. In addition, the proposed current controlled PWM technique has lower switching frequency than that of conventional current controlled PWM technique at the same current limit. Two inverters are compared analytically. The improved voltage waveform of current controlled PWM with N.P.C structure is analyzed and the performance is investigated by the computer simulation.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.4
• /
• pp.99-104
• /
• 2020

In this paper, efficiency and loss characteristics of GaN FET were reported by applying it into the QR flyback converter. In particular, for the comparison of efficiency characteristics, QR flyback converter experimental circuits with Si FET and with GaN FET were separately produced in 12W class. As a result of the experiment, the experimental circuit of the QR flyback converter using GaN FET reached a high efficiency of 90% or more when the load power was 2W or more, and the maximum efficiency was observed to be about 92%, and the maximum loss power was about 1.1W. Meanwhile, the efficiency of the experimental circuit with Si FET increased as the input voltage increased, and the maximum efficiency was observed to be about 82% when the load power was 9W or higher, and the maximum loss power was about 2.8W. From the results, it is estimated that that in the case of the experimental circuit applying the GaN FET switch, the power conversion efficiency was improved as the switching loss and conduction loss due to on-resistance were reduced, and the internal loss due to the synchronous rectifier was minimized. Consequently, it is concluded that the GaN FET is suitable for under 20W class power supply unit as a high efficiency power switch.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.118-118
• /
• 2003

전력반도체 소자로 사용되는 p$^{-}$-n$^{-}$ 접합 다이오드의 스위칭 속도를 향상시키고 그에 따른 에너지 손실을 감소시키기 위해 전자 조사를 실시하였다. Reverse recovery time이 현저히 감소한 반면, 전자 조사에 의한 누설전류와 on-state 전압 강하와 같은 그 외의 전기적 특성 저하는 무시할 수 있는 정도였다. 그밖에 시료의 deep level transient spectroscpy(DLTS) 분석 결과와 secondary ion mass spectrometry(SIMS) depth profile을 근거로 결함 분포와 전자조사 유도결함의 유형을 논하였다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.12 no.3
• /
• pp.26-29
• /
• 1975

In this paper, the input equivalent resistances of the n phase-diode average and envelope detection. circuits for the sinusoidal signal waveforms are analytically derived from the power loss in their load resistances, and the input equivalent resistance of the n phase-diode envelope detection circuits for the arbitrary signal waveforms is also obtained from the same physical conception.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.3
• /
• pp.114-119
• /
• 2007

Dielectric properties of quartz glass and $Si_3N_4$ are investigated using the waveguide method from room temperature to $800^{\circ}C$. For the case of dielectric constant, $Si_3N_4$ showed similar increase with quartz glass up to $300^{\circ}C$, but less increase from $300^{\circ}C$ to $800^{\circ}C$. For the case of loss tangent, those showed gradual increase with temperature except of some temperature points. The loss tangent of $Si_3N_4$ and quartz glass increased up to 18.2% and 12.5% respectively. Through these researches, high temperature dielectric properties of silicon nitride materials are characterized.