• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.1
• /
• pp.27-36
• /
• 2006

Most of domestic multipurpose dams were basin area to be large, therefore, soil loss were occurred by downpour in the rainy season, They have caused to accumulate sediments on the river and dam reservoir that brought the decrease of storage volume and difficulties of the quality management of water. Until now, the measurement cycle of sediments surveying was long and it was designed to use surveying the degree of sediments, Thus there were many difficult things to secure accuracy. In this study, it was intended to analyze the origin position tracing of sediments and the movement route, for this purpose, aerial LiDAR technology was applied to precise sediments surveying. The amount and location of soil loss were evaluated by classified properties of soil, land-cover, and topographical conditions in detail. Therefore, the reliance could be maintained in analyzing the route of soil loss by extracting the flow within a watercourse and using the advanced accurate DEM.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.5 no.2
• /
• pp.62-67
• /
• 2002

This paper - following 'Development of multi-purpose marine waste cleaning systems for the shallow waters (Part I : preliminary conceptual design)'- describes on the system development and the sea trial performance evaluation(Cho[2003]). The multi-functional seabed waste collecting system and the towing hook system were developed. The maximum working depth of these systems are 15 and 100 meters, respectively(MOMAF[2001]). For the multi-purpose use to collect the marine waste, this system contains floating waste collecting device for the waste on seawater and remained waste collecting device for the waste on seabed, while steel wire cutting system is added for higher efficiency In order to evaluate the system performance, the prototype of multi-functional system was constructed and the sea trial test at shallow water were carried out. As a result, this system operated well with safe and without any interaction so that the developed systems are practicable and applicable.

• Journal of Environmental Science International
• /
• v.22 no.3
• /
• pp.309-318
• /
• 2013

This study was conducted for determining the influence of artificial structures on benthic macroinvertebrate communities in stream. Sampling was taken at upper(pool), down(riffle) and control(riffle) from two check dams, two weirs, one agricultural reservoir, and one multipurpose dam in northern part of Gyeongsangbuk-do. The benthic macroinvertebrate communities of these structures were surveyed during 2009 to 2011. The simple habitat of benthic macroinvertebrates occurred at the upper sites due to pooling effects from artificial structures. Specifically, Check dam1, Jusanji, Imha dam showed very low biological attribute values compared to the down and control sites, which have greater difference in substrate characteristics. However, in the upper sites of Check dam2, Weir1 and Weir2, the difference of values of biological attributes was relatively smaller. Also, proportion of functional feeding groups and functional habit groups were relatively simpler at upper stream and the degree of community differences was greater between upper and down, control sites. Spearman's correlation between biological attributes and substrate characteristics, water quality parameters had significant correlations; particularly, the substrate characteristics were more significantly related. In conclusion, the pool caused by artificial structures had negative effects on benthic macroinvertebrate communities thus leading to simplified stream habitats at upper stream ecosystems.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.7 no.1
• /
• pp.55-63
• /
• 2005

The outcome of modem sports events are reliant on not only the athletic ability and technology of individual players but their sportswear proterties. State-of-the-Hitech sportswear has started to be introduced in the 1950s, and in addition to the athletic capability of players, sportswear is one of the primary factors to affect the results of sports games, as a wide variety of Hi-Tech functional materials have come out since the 1990s. The purpose of this study was to development into the concept of active sportswear, to sort out hitech functional product lines in this field, to look into sports stars and Hi-Tech functional sports brands, and finally to identify the major characteristics of recent active sportswear. The result of this study were as follows: 1. There were largely four characteristics in recent functional sportswear materials: fast-drying cooling, minimized resistance, ultralight comfortableness, and water vapor permeable/waterproof function. 2. Besides the athletic capability and technology of players, Hi-Tech functional products are one of the major factors to determine the outcome of modem sports events. Functional synthetic fiber is preferred, instead of cotton, since the former is easier to manage and retains humidity better. 3. The major features of recent trend in active sportswear products are, functional, diversity and value. That is, those products are functional, since they are easy to manage and retain proper humidity, and they are for multipurpose, since they are fashionable and practical at the same time. And they are valuable, being expensive but appropriate for the movement of the body and having a high quality.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.3
• /
• pp.115-126
• /
• 1990

In the past, seawall and sea dike very higher than sea-water elevation had been constructed mainly to prevent the wave overtopping volume. However, the coastal zone is recently developed for the multipurpose of not only preventing from the coastal disaster but conserving the coastal environment and utilizing the coastal space. In this sense, this paper deals with the artificial reef being able to reduce the overtopping volume. Relations of the overtopping volume to the breaking wave are briefly reviewed theoretically, and fundamental factor affecting it are also obtained experimentally form the artificial reef with the irregular waves, In addition, the numerical simulation is developed to investigate the effects of spectral band width for the overtopping volume. The most effective artificial reef section to reduce the overtopping volume is proposed.

• Ecology and Resilient Infrastructure
• /
• v.6 no.4
• /
• pp.287-294
• /
• 2019

This study investigated longitudinal changes in riverbed materials properties and temporal alteration of river channel geomorphology in the Geum River basin, where two multipurpose dams(Yongdam Dam and Daecheong Dam) were built in upstream area. We carried out grain size distribution analyses and measured soil organic matter contents of riverbed materials taken at the upper and lower sites of the two large dams. We also estimated the channel width, bar area and vegetation encroachment using the oldest map and aerial photographs taken before and after the construction of the dams. The results can contribute to increasing understandings of dam induced habitat alteration in river ecosystem.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.11 no.2
• /
• pp.173-177
• /
• 2017

Bidet is widely used and is being developed for multipurpose. However, use of this bidet varies by the elderly and disabled people. Therefore, this research compares and analyze need of bidet for elderly and disabled people and by many different types. This survey was conducted targeting 39 elderly and 120 disabled people. This survey is consist of questions that varies by bidet companies and includes questions like UI cognitive abilities, automatic water flushing, position of control box and necessary of embossment for icons. As a result, elderly and disabled people showed similar in result but for visually impaired person, the ratio of preference showed 1:9 which is opposite. As for visually impaired person, the ratio of preference showed 1:9 which is pretty high.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.6 no.1 s.20
• /
• pp.69-81
• /
• 2006

The purpose of this study is to identify the downstream influences due to the dam discharge by using 2-dimensional model, SMS(Surface water Modeling System). RMA-2 and SED-2D in SMS were applied to Yongdam multipurpose dam watershed located in Gum river basin. Through the simulation, erosion and deposit quantitative analysis of sinuous channels and scour pattern analysis of bridges have been done. A differences erosion depths between deposit are simulated as $-102.4 mm{\sim}54.2 mm$ at No.176(1.4 km) and $-104.1 mm{\sim}28.9 mm$ at No.146(7.4 km), sinuous channel. The river bed at Kamdong bridge in straight channal is simulated as uniform erosion. However, the river bed at Dumdul bridge in sinuous channal has been shown as different erosion depths at each sides. Consequently, the parts that could not be simulated on the existing 1-dimensional model, can be improved results by using a 2-dimensional model, about weakness points for hydraulic modeling such as extreme bend, tributary confluence.

• Journal of Korean society of Dental Hygiene
• /
• v.17 no.5
• /
• pp.911-919
• /
• 2017

Objectives: The baobab tree is a multipurpose, widely-used species with medicinal properties and numerous food uses. The aim of study was to evaluate the effect of oral administration of baobab on the formalin-induced inflammatory pain in rat model injected into the orofacial regions. Methods: Male Sprague-Dawley rats weighing 260-280 g were used. Pain in the orofacial region was induced using two models, 5% formalin was injected $50{\mu}l$ subcutaneously or $30{\mu}l$ in temporomandibular joint (TMJ), respectively. Rats were divided into 4 groups (n=6); formalin, formalin after distilled water (vehicle) or baobab (150, 300 mg/kg). The number of noxious behavioral responses with scratching the facial region was recorded for 9 successive 5-min intervals following formalin injection. Results:There was no significant difference in the first response to the pain between the formalin induced group and the drug administration group. However, in the secondary infusion group, all of the pain medication were responded (Bao 150, 300 mg/kg) (p<0.05). Conclusions:The results showed analgesic effect of baobab on formalin-induced orofacial inflammatory pain. This suggests that the natural product is an effective alternative to the postinflammatory pain control.

• Restorative Dentistry and Endodontics
• /
• v.21 no.2
• /
• pp.585-601
• /
• 1996

The purpose of this study was to elucidate the effect of blood-and saliva-contamination during dentin pretreatment procedure on tensile bond strength, and to investigate the effect of contaminant-removing treatments on the recovery of bond strength of dentin bonding agents. Dentin specimens prepared from freshly extracted bovine mandibular anterior teeth were divided into non-contaminated control and contaminated experimental groups. The specimens of the contaminated group were contaminated with saliva or blood after etching or priming procedure, followed by contaminant-removing treatments. All the specimens were bonded with All Bond$^{(R)}$ 2 dentin bonding agent and Bisfil$^{TM}$ composite resin or Scotchbond$^{TM}$ Multipurpose and Z100. After all the bonded specimens were stored in $37^{\circ}C$ distilled water for 24 hours, tensile bond strengths were measured. The contaminated dentin and fractured dentin surfaces were examined under the scanning electron microscope. The results were as follows : Contaminated specimens showed lower bond strength than non-contaminated ones regardless of the kind of contaminant, contamination time and contaminant-removing treatments, except specimens which were acid-etched following saliva contamination after etching in All Bond$^{(R)}$ 2 groups (p<0.05). Blood contaminant resulted in much bond strength decrease than saliva ones (p<0.01), and contamination after priming resulted in much decrease in bond strength than after etching (p<0.01). Re-etching resulted in increase of bond strength in the specimens contaminated with saliva after etching but not in blood contaminated ones. Re-priming resulted in increase of bond strength in the specimens contaminated after priming regardless of the kind of contaminant.