• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.6A
• /
• pp.405-419
• /
• 2012

In this paper, we propose a joint base station(BS) and relay precoders design in multi-relay aided multi-user all-multiple-input multiple-output(MIMO) system. The design criterion is to minimize user sum mean square error(SMSE) with relay sum power constraint(RSPC) where only local channel state information(CSI)s are available at relays. Local CSI at a relay is defined as the CSI of the channel which the relay itself accesses, out of among all the 1st hop and the 2nd hop channel in the system. With BS precoder structure which is concatenated with block diagonalization(BD) precoder, each relay can determine its own precoder using only local CSI. Proposed scheme is based on sequential iteration of two stages; stage 1 determines BS precoder and relay precoders jointly with SMSE duality, and stage 2 determines user receivers. Proposed scheme can be demonstrated theoretically to be always converge. We verify that proposed scheme outperforms simple amplify-and-forward(SAF), MMSE relay, and proposed schemes in [1] in terms of both SMSE and sum-rate performances.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.385-392
• /
• 2021

In general, earth retaining work in construction works enables the construction of structures, prevents the displacement of the surrounding ground to the maximum extent, and plays an important role in ensuring the safety of the surrounding structures and field workers. The earth retaining work and the construction method differ according to the various ground characteristics, surrounding topographical characteristics, repair environment, and design conditions. In particular, in the case of Seoul city, the environments and ground conditions differ according to the area. This study analyzed the earth retaining work cost mainly for the apartment construction project in Seoul and calculated the approximate earth retaining work cost at the project planning stage. A model was developed to predict the cost of earth retaining work that matches the characteristics of Seoul City and predict the construction cost for earth retaining work. This paper presents the predicted earth retaining work cost using a multiple regression model that applies 10 project outlines as independent variables. The error rate of the prediction result of the earth retaining work cost of the apartment construction project in Seoul using multiple regression models was 10.75%.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.1
• /
• pp.87-93
• /
• 2013

The selection of the temperature sensor in a cryogenic system depends on the temperature range, shape, and accuracy. An accurate temperature sensor is essential for improving the reliability of an experiment. We have developed a calibration system for cryogenic temperature sensors using a two-stage cryocooler. To reduce the heat load, a thermal shield is installed at the first stage with multiple layer insulation (MLI). We have also developed a sensor holder for calibrating more than 20 sensors simultaneously in order to save time and reduce costs. This system can calibrate sensors at variable temperatures via temperature control using a heater. In this paper, we present the design and fabrication of the temperature sensor calibration system and a representative experimental result.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.917-924
• /
• 2019

This paper presents a wideband low noise amplifier (LNA) that is suitable for LTE-Advanced and 5G communication standards employing carrier aggregation (CA). The proposed LNA encompasses a common input stage and a dual output second stage with a buffer at each distinct output. This architecture is targeted to operate in both intra-band (contiguous and non-contiguous) and inter-band CA. In the proposed design, the input and second stages employ a gm enhancement with resistive feedback technique to achieve self-biasing, enhanced gain, wide bandwidth as well as reduced noise figure of the proposed LNA. An up/down power controller controls the single input single out (SISO) and single input multiple outputs (SIMO) modes of operation for inter-band and intra-band operations. The proposed LNA is designed with a 45nm CMOS technology. For SISO mode of operation, the LNA operates from 0.52GHz to 4.29GHz with a maximum power gain of 17.77dB, 2.88dB minimum noise figure and input (output) matching performance better than -10dB. For SIMO mode of operation, the proposed LNA operates from 0.52GHz to 4.44GHz with a maximum voltage gain of 18.30dB, a minimum noise figure of 2.82dB with equally good matching performance. An $IIP_3$ value of -6.7dBm is achieved in both SISO and SIMO operations. with a maximum current of 42mA consumed (LNA+buffer in SIMO operation) from a 1.2V supply.

• Fashion & Textile Research Journal
• /
• v.3 no.5
• /
• pp.415-422
• /
• 2001

Focusing on working with fashion show as fashion model in South Korea, this study was develop a fashion model typology based on specific model characteristics related demographics and body, job satisfaction/dissatisfaction factors. The survey was done through questionnaire and 194 fashion models were used in the data analysis. The statistical analysis used in this study were frequency, ${\chi}^2$-test, cluster Analysis, MANOVA. ANOVA and Duncan multiple range test. The results of this study were as follows: 1) The majority of sample were as follows: unmarried, college graduate and undergraduate, resident in the Seoul, 20 to 24 yrs old female with 175-177 cm, 52-54 kg, B-W-H (33-24-35 inch). 2) The types of fashion model were classified into 4 types: showing type, lack of professionalism type, matured professionalism type, dissatisfaction with job-environment type. The model segments were profiled on levels of various job related attitude factors, job satisfaction/dissatisfaction, model education, working condition, human relation, regulation discrimination, fashion show stage level, the job of model, body & clothing, and promising job. 3) There were significant differences found between their sex, academic background, guarantee, and in all factors in their job related attitude factors, job satisfaction/dissatisfaction, model education, working condition, human relation, regulation discrimination, fashion show stage level, the job of model, body & clothing, style promising job.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.4
• /
• pp.185-189
• /
• 2017

This paper proposes a low power frequency divider for an integrated CMOS phase-locked loop (PLL). An injection-locked frequency divider (ILFD) was designed, along with a current-mode logic (CML) frequency divider in order to obtain a broadband and high-frequency operation. A ring oscillator was designed to operate at 1.2 GHz, and the ILFD was used to divide the frequency of its input signal by two. The structure of the ILFD is similar to that of the ring oscillator in order to ensure the frequency alignment between the oscillator and the ILFD. The CML frequency divider was used as the second stage of the divider. The proposed frequency divider was applied in a conventional PLL design, using a 0.18 ${\mu}m$ CMOS process. Simulation shows that the proposed divide-by-two ILFD and the divide-by-eight CML frequency dividers operated as expected for an input frequency of 1.2 GHz, with a power consumption of 30 mW.

• Journal of Korean Society of Water and Wastewater
• /
• v.13 no.1
• /
• pp.43-50
• /
• 1999

In spite of low energy requirement, and operation and construction cost, biofilters with soil beds have not been operated efficiently. Because of excess moisture in winter and rainy periods, saturated pores in the bed prevent passage and sorption of odorous compounds. Sometimes this results in septic conditions that release previously sorbed and oxidized sulfur. Therefore, an economical and effective alternative needs to be developed. The objectives of this study were to confirm applicability of the granular scrap tires with compost for treating odorous gas as well as to obtain optimum design parameters for proposed system. In lab-scaled test, multiple stage reactors had lower headloss than a single stage reactor and less headloss was occurred for the gas with higher moisture content. For practical purpose, pilot-scaled reactor was operated to remove odor from septic tank, manure and animal wastewater treatment plant and composting machine. According to the results of pilot scaled test, $H_2S$ can be always removed completely and ammonia/amine can be removed excellently when proper moisture content is provided. The results from lab and pilot test showed that granular scrap tire could be replaced with soil as supporting material for biofilter showed excellent drainage because of its ability to reject moisture.

• Asia-Pacific Journal of Business
• /
• v.15 no.1
• /
• pp.179-192
• /
• 2024

Purpose - The purpose of this study is to examine the effect of entrepreneurial experience, business model innovation and financing on new venture performance. Design/methodology/approach - This study analyzes survey data on new ventures in Korea and investigated research hypothesis by multiple regression analysis. Findings - Founders' prior startup experience have different impacts on performance depending on whether they had a successful or failed startup. Successful experience has a positive impact on early performance, while failure experience has a negative impact. Business model innovation shows a positive and significant relationship with early performance. External financing has different effects depending on the type of funding source and performance variables. VC funding is positively related to employment creation, while government R&D funding is negatively related to sales volume. Research implications or Originality - This study confirms that the impact of entrepreneurial experience on early performance varies depending on the characteristics of successful and unsuccessful entrepreneurs. It also empirically confirms that business model innovation has a significant impact on early performance. We empirically examine the relationship between various external financing sources of venture firms and early performance. Since the effects of entrepreneurial experience, business model innovation, and external financing on early stage performance may be different, entrepreneurs should consider these relationships when pursuing early stage business opportunities.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.2
• /
• pp.268-276
• /
• 2005

This paper presents the motivation, design, and a preliminary evaluation of a virtual world builder, CLOVES. CLOVES is designed to support rapid construction of data-rich virtual environments and instruments for young children's science inquiry teaming. It provides a three-tiered programming Interface: a visual design environment, scripting layer, and low-level application programming interface targeting for multiple levels of programming expertise. It is also intended to be a collaborative medium among interdisciplinary domain experts such as educators, 3D modelers and software developers. A preliminary case study was conducted to evaluate the capabilities and effectiveness of CLOVES. The results showed that designers actively participated in decision making at every stage of the design process and shared knowledge among one another.

• Journal of Power Electronics
• /
• v.14 no.4
• /
• pp.733-741
• /
• 2014

The integration of photovoltaic (PV) energy sources into DC grid has gained considerable attention because of its enhanced conversion efficiency with reduced number of power conversion stages. During the integration process, a local control unit is normally included with every power conversion stage of the PV source to accomplish the process of maximum power point tracking. A centralized monitoring and supervisory control unit is required for monitoring, power management, and protection of the entire system. Therefore, we propose a field-programmable gate array (FPGA) based centralized control unit that integrates all local controllers with the centralized monitoring unit. The main focus of this study is on the process of integrating many local control units into a single central unit. In this paper, we present design and optimization procedures for the hardware implementation of FPGA architecture. Furthermore, we propose a transient analysis and control design methodology with consideration of the nonlinear characteristics of the PV source. Hardware experiment results verify the efficiency of the central control unit and controller design.