• 한국음향학회지
• /
• 제21권4호
• /
• pp.387-393
• /
• 2002

비정상 잡음에 오염된 음성신호의 향상을 위하여 혼합 은닉필터모델 (HFM: Hidden Filter Model)에 기초한 기법을 제안하였다. 오염된 음성신호를 선형상태방정식으로 모델링하고 파라미터는 마코프 모델에 따른다고 가정하였다. 이 파라미터들은 잡음에 오염되지 않은 학습신호로부터 추정할 수 있다. 추정과정은 혼합 상호복합모델 (IMM: Interacting Multiple Model)에 기초하여 이루어지며, 음성신호의 추정값은 상호작용하는 병렬의 칼만 필터들의 가중합으로 주어진다. 실험결과로부터 제안한 방법의 성능이 기존의 방법에 비해 개선되었음을 확인할 수 있었다.

• 한국축산식품학회지
• /
• 제42권4호
• /
• pp.655-671
• /
• 2022

There are differences of spectral characteristics between different types of meat cut, which means the model established using only one type of meat cut for meat quality prediction is not suitable for other meat cut types. A novel portable visible and near-infrared (Vis/NIR) optical system was used to simultaneously predict multiple quality indicators for different commercial meat cut types (silverside, back strap, oyster, fillet, thick flank, and tenderloin) from Small-tailed Han sheep. The correlation coefficients of the calibration set (R_c) and prediction set (R_p) of the optimal prediction models were 0.82 and 0.81 for pH, 0.88 and 0.84 for L^*, 0.83 and 0.78 for a^*, 0.83 and 0.82 for b^*, 0.94 and 0.86 for cooking loss, 0.90 and 0.88 for shear force, 0.84 and 0.83 for protein, 0.93 and 0.83 for fat, 0.92 and 0.87 for moisture contents, respectively. This study demonstrates that Vis/NIR spectroscopy is a promising tool to achieve the predictions of multiple quality parameters for different commercial meat cut types.

• International Journal of Control, Automation, and Systems
• /
• 제4권6호
• /
• pp.682-688
• /
• 2006

This paper deals with the delay-dependent and rate-independent stabilization of systems with multiple unknown time-varying delays and time-varying structured uncertainties. All the linear matrix inequalities based conditions are derived by employing free-weighting matrices to express the relationships between the terms in the Leibniz-Newton formula. The criteria do not require any tuning parameters. Numerical examples demonstrate the validity of the method.

• 한국지능정보시스템학회:학술대회논문집
• /
• 한국지능정보시스템학회 2001년도 The Pacific Aisan Confrence On Intelligent Systems 2001
• /
• pp.316-321
• /
• 2001

When the multiple video sources are together transmitted through the channel of fixed bandwidth, the efficiently picture quality method is necessary. This paper presents the picture quality control method to keep the same distortion level among the video sources. We first find a model of distortion and bitrate for the multiplexing system of multiple sources. Then we obtain the bitrate for each source to have same distortion level among the sources by using the approximated model parameters for simple implementation.

• 한국공작기계학회논문집
• /
• 제16권5호
• /
• pp.84-89
• /
• 2007

This research was done on the basis of assumption that there is a relationship between welding parameters and geometry of the back-bead being a gap in arc welding. Multiple regression analysis was used as method for predicting the geometry of the back-bead. The analysis data and the verification data were used for the formation of multiple regression analysis. The method was used to perform the prediction of the back-bead.

• Communications for Statistical Applications and Methods
• /
• 제13권1호
• /
• pp.39-47
• /
• 2006

The Bayesian approach to multiple testing procedure for one sample testing problem proposed by Scott and Berger (2003) is extended to two-sample comparison problem in microarray experiments. The prior distribution of each gene's mean for one sample is given conditionally on the corresponding gene's mean for the other sample. Posterior distributions of interesting parameters are derived and estimated based on an importance sampling method. A simulated example is given for illustration.

• Journal of the Korean Data and Information Science Society
• /
• 제17권1호
• /
• pp.233-244
• /
• 2006

In this paper, we develop the Bayesian multiple comparisons procedure for the binomial distribution. We suggest the Bayesian procedure based on fractional Bayes factor when noninformative priors are applied for the parameters. An example is illustrated for the proposed method. For this example, the suggested method is straightforward for specifying distributionally and to implement computationally, with output readily adapted for required comparison. Also, some simulation was performed.

• Journal of Biosystems Engineering
• /
• 제43권1호
• /
• pp.30-36
• /
• 2018

Purpose: The objective of this study is to evaluate the effect of cultivation conditions on the growth and glucosinolate content of Chinese cabbage and kale. Methods: Chinese cabbage and kale were grown in three different cultivation conditions, including a plant factory, greenhouse, and open field. Samples were collected at two harvesting times (10 d and 20 d after transplanting the seedlings). Nine growth parameters (plant height, plant width, number of leaves, petiole diameter, SPAD readout, leaf length, leaf width, stem diameter, and plant weight) were measured immediately after harvesting, and the samples were freeze-dried and stored until the glucosinolate content was analyzed. Mean values of the growth parameters and glucosinolate contents were evaluated using Duncan's multiple range tests. Results: The results indicated that the plant parameters of the Chinese cabbage and kale were greater for plants grown in the plant factory and greenhouse. The plant height, width, and weight showed significant differences in the Duncan's multiple range tests at a 5% level. The plant factory also produced greater contents of most of the glucosinolates. Conclusions: Three different cultivation conditions significantly affected the growth and glucosinolate contents of Chinese cabbage and kale. Further study is necessary to investigate other functional components and different vegetable varieties.

• 한국군사과학기술학회지
• /
• 제23권1호
• /
• pp.18-27
• /
• 2020

In order to estimate the launch point of a high-speed vehicle, predicting the various characteristics of the vehicle's movement, such as drag and thrust, must be preceded by the estimation. To predict the various parameters regarding the vehicle's characteristics, we build the IMM filter specialized in predicting the parameters of the post-launch phase based on flight dynamics. Then we estimate the launch point of the high-speed vehicle using Inverse Dynamics. In addition, we assume the arbitrary error level of the radar for accuracy of the prediction. We organize multiple-dimensioned IMM structures, and figure out the optimal value of parameters by comparing the various IMM structures. After deriving the optimal value of parameters, we verify the launch point estimation error under certain error level.

• International Journal of Contents
• /
• 제5권1호
• /
• pp.51-55
• /
• 2009

In this paper, we present a structure of personalized e-Learning system to study for a test formalized by uniform multiple-choice using on/off line mixed estimations as is the case of Driver :s License Test in Korea. Using the system a candidate can study toward the license through the Internet (and/or mobile instruments) within the personalized concept based on IRT(item response theory). The system accurately estimates user's ability parameter and dynamically offers optimal evaluation problems and learning contents according to the estimated ability so that the user can take possession of the license in shorter time. In order to establish the personalized e-Learning concepts, we build up 3 databases and 2 agents in this system. Content DB maintains learning contents for studying toward the license as the shape of objects separated by concept-unit. Item-bank DB manages items with their parameters such as difficulties, discriminations, and guessing factors, which are firmly related to the learning contents in Content DB through the concept of object parameters. User profile DB maintains users' status information, item responses, and ability parameters. With these DB formations, Interface agent processes user ID, password, status information, and various queries generated by learners. In addition, it hooks up user's item response with Selection & Feedback agent. On the other hand, Selection & Feedback agent offers problems and content objects according to the corresponding user's ability parameter, and re-estimates the ability parameter to activate dynamic personalized learning situation and so forth.