• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.6A
• /
• pp.791-802
• /
• 1999

This paper introduces a wireless multimedia CDMA system using a simulcasting method and configuring multiple radio links between a user and radio ports. The CDMA system with multiple links can support seamless and soft handoffs as well as port-diversity effect. We propose two transmission power control algorithms for the multiple links which support the required service quality. We perform simulations for the capacity of the proposed system. In the simulations, a system with nine ports is configured and simulated. For the uplink, as the number of the multiple links increases, the capacity also increases and immediately approaches to the theoretical upper limit. It is shown that four radio links are enough to achieve the theoretical maximum capacity. On the other hand, for the downlink, though it has the merit of soft and seamless handoff in the wireless ATM system, the capacity rather decreases as the increase of the number of the links due to the severe multiple interferences.

• Convergence Security Journal
• /
• v.8 no.4
• /
• pp.51-56
• /
• 2008

A combination of VPNs and dial-up access, such as DSL and Cable, usually provides the cost-effective solution as the substitution of private networks on high-cost leased line. The business demand for high availability has increased with VPN spreading. This paper presents the schemes for a high availability of network access and a load balancing of network traffic in VPN gateways by using multiple links or multihoming capability based on active-active approach. The high availability and load balancing of network links can be achieved by duplicating external network access into multiple independent links. This can provide a continuous network connection to internal users even if one of the links is failed. Moreover, it can provide twice network bandwidth by distributing the traffic into the links. Static and dynamic algorithms are proposed as the load balancing algorithms.

• The KIPS Transactions:PartC
• /
• v.11C no.2
• /
• pp.253-262
• /
• 2004

In this paper, a session allocation algorithm for a switch with multiple shared links is proposed. The algorithm guarantees the reserved bandwidth to each service class and keeps the delay of sessions belonging to a service class as close as possible even if the sessionsare allocated to different shared links. To support these qualities of services, a new scheduling model for multiple shared links is defined and a session allocation algorithm to decide a shared link to be allocated to a new session on the connection establishmentis developed based on the model. The proposed heuristic algorithm allocates a session to a link including the subclass with the shortest (expected) delay that subclasses of the service class the session belongs to will experience. Simulation results verify that a switch with multiple shared links hiring the proposed algorithm provides service classes with fairer bandwidth allocation and higher throughput, and guarantees reserved bandwidth better than the switch hiring other session algorithms. It also guarantees very similarservice delay to the sessions in the same service class.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.39 no.2
• /
• pp.9-18
• /
• 1997

Abstract This paper presents a heuristic method for optimal design of water distribution system with multiple sources and potential links. In multiple source pipe network, supply rate at each source node affects the total cost of the system because supply rates are not uniquely determined. The Linear Minimum Cost Flow (LMCF) model may be used to a large scale pipe network with multiple sources to determine supply rate at each source node. In this study the heuristic method based on the LMCF is suggested to determine supply rate at each source node and then to optimize the given layout. The heuristic method in turn perturbs links in the longest path of the network to obtain the supply rates which make the optimal design of the pipe network. Once the best tree network is obtained, the frequency count of reconnecting links by considering link failure is in turn applied to form loop to enhance the reliability of the best tree network. A sample pipe network is employed to test the proposed method. The results show that the proposed method can yield a lower cost design than the LMCF alone and that the proposed method can be efficiently used to design irrigation systems or rural water distribution systems.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.9
• /
• pp.18-25
• /
• 2016

In D2D communications underlaying a multicell network, it is of primary importance to ensure coexistence of cellular links and D2D links with minimal interference. Therefore, resource allocation scheme for D2D links should be designed to limit the interference between cellular links and D2D links. In this paper, we propose an effective resource allocation scheme for multiple D2D links which share the uplink spectrum resource with cellular users in a multicell network. Under the assumption that the locations of users are known to the base station, the proposed scheme allocates cellular resources to D2D links, such that the interference between a cellular link and multiple D2D links is minimized. In particular, we compute two constants from the path loss model and then use the constants to protect both cellular and D2D links. Simulation results are provided to verify the performance of the proposed scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.1A
• /
• pp.73-81
• /
• 2011

IEEE 802.11 PHY and MAC layer provide multiple channels and data rates. To improve the performance of IEEE 802.11 multi-radio ad hoc networks, it is required to utilize available channels and data rates efficiently. However, in IEEE 802.11 multi-rate networks, the rate anomaly (RA) problem occurs that the network performance is severely degraded as low-rate links affect high-rate links. Hence, in this paper, we propose a model-based rate separation (MRS) algorithm that uses multiple channels to separate different data rate links so that the RA problem is mitigated. MRS algorithm utilizes an existing throughput model that estimates the throughput of IEEE 802.11 single-hop networks to separate low-rate links and high-rate links. Through simulations, we demonstrate that the MRS algorithm shows improved network performance compared with existing algorithms in multi-radio ad hoc networks.

• Journal of electromagnetic engineering and science
• /
• v.10 no.4
• /
• pp.263-269
• /
• 2010

Multiple input multiple output (MIMO) has been considered one of the key enablers of broadband wireless communications. The indoor environment is known to be favorable to ensure both high rank property and high signal-to-interference/noise ratio (SINR) to fully exploit MIMO spatial multiplexing (SM) gain. In this paper, we describe several practical deployment cases where repeater links (or relay links), such as those present with an indoor distributed antenna system (DAS), can act as keyholes to degenerate the rank property of MIMO communications. In this case, we cannot exploit MIMO SM gain in indoor environment. We propose a novel MIMO communication scheme which uses simple converter in the devices in repeater links to resolve the rank degeneration issue and to ensure MIMO SM gain in highly MIMO-favorable indoor environment. MIMO SM is possible over the indoor DAS with single cable line through use of simple converters, which enables practical deployment in real fields.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.5
• /
• pp.173-178
• /
• 2010

In this paper, we analyze the performance of multilink Bluetooth service and design the multilink application between various Bluetooth devices. There are many restrictions for the Bluetooth based multilink services. Especially, these restrictions occur due to SCO and ACL which construct logical links. In forming ake a scatternet, only one SCO link can be utilized. Also, the number of ACL link depends on the number of RFCOMM channels. High quality audio data streaming cannot be supported by using SCO link. In that case, ACL link should be used for the audio streaming and the data rate of other data links decreases. We implemented the multilink services to verify the considerations for the multilink service.

• Korean Journal of Cognitive Science
• /
• v.10 no.1
• /
• pp.25-43
• /
• 1999

The focus of this study is on the elements of structure design that facilitate u user interaction with applications within cyberspace Structure design entails decisions regarding the optimal classification and hierarchical organization of information into s successively higher units. i.e .. the grouping of highly related information in the form of nodes of a site and the subsequent connection of nodes that are inter-related. The decisions are based on the designer's subjective classification framework. which is not always compatible with that of the user. We propose that the ensuing cognitive dissonance can be reduced via the employment of multiple hierarchies and cross-referencing links. Multiple hierarchies represent a single information space in terms of a number of single hierarchies. each of which represent a different perspective Cross-referencing refers to the inter-connection between the constituent hierarchies by providing a link to the alternate hierarchy for information that is most likely to be categorized in diverse manners by users with differing perspectives. In this study we conducted two empirical studies to gauge the effectiveness of multiple hierarchies and Cross-referencing links in the domain of cyber shopping malls. In the first phase. an experiment was conducted to determine how subjects classified given products with respect to two different perspectives for categorization. Experimental cyber malls were developed based on the results from the first phase to test the effectiveness of multiple hierarchies and cross-referencing links. Results show that the ease of navigation was higher for cyber malls that had implemented cross-referencing links are of greater value when used in conjunction with single hierarchical designs rather than multiple hierarchies. Users satisfaction with and ease of navigation was higher for cyber malls that had not implemented multiple hierarchies. This paper concludes with discussion of these results and their implications for designers of cyber malls.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.6
• /
• pp.535-540
• /
• 2013

Objective: The aim of this study is to evaluate the effectiveness and efficiency of causal links between various error causes in human error analysis. Background: As finding root causes of human error in safety-critical systems is often a cognitively demanding and time-consuming task, it is particularly necessary to develop a method for improving both the quality and efficiency of the task. Although a few methods such as CREAM have suggested causal linking between error causes as a means to enhance the quality and efficiency of human error analysis, no published research to date has evaluated the performance of the causal links. Method: The performance of the CREAM links between error causes were evaluated with 80 railway accident investigation reports from the UK. From each report, errorneous actions of operators were derived, and for each error, candidate causes were found by following the predefined links. Two measures, coverage and selectivity, were used to evaluate the effectiveness and efficiency of the links, respectively. Results: On average, 96% of error causes actually included in the accident reports were found by following the causal links, and among the total of 121 possible error causes, the number of error causes to be examined further was reduced to one-tenth on average. As an additional result of this work, frequent error causes and frequently used links are provided. Conclusion: This result implies that the predefined causal links between error causes can significantly reduce the time and effort required to find the multiple levels of error causes and their causal relations without losing the quality of the results. Application: The CREAM links can be applied to human error analysis in any industry with minor modifications.