• 산업경영시스템학회지
• /
• 제37권4호
• /
• pp.116-125
• /
• 2014

In this paper, we investigate an inventory and production system in a three-layer supply chain system involving a single supplier, single manufacturer and multiple retailers. Earlier study in this type of supply chain only consider a single raw material in order to produce single item, but we consider raw materials in order to produce multiple items. It is assumed that the cycle time at each stage is an integer multiple of the adjacent downstream stage. We develop an iterative solution procedure to find the order quantity for the multiple items and raw materials that minimizes the supply chain-wide total cost per unit time of the supplier and manufacturer's raw materials ordering and holding, setup and finished items holding, the retailer's ordering and inventory holding. Numerical examples are presented to show that the proposed heuristic gives good performance.

• Journal of Power Electronics
• /
• 제12권3호
• /
• pp.439-447
• /
• 2012

In this paper, an input-series auxiliary power supply scheme is proposed, which is suitable for high input voltage and multiple-output applications. The power supply scheme is based on a two-transistor forward topology, all of the series modules have a common duty ratio, all the switches are turned on and off simultaneously, and the whole circuit has a single power transformer. It does not require an additional controller but still achieves efficient input voltage sharing (IVS) for each series module through its inherent transformer-integration strategy. The IVS process of this power supply scheme is analyzed in detail and the design considerations for the related parameters are given. Finally, a 100W multiple-output auxiliary power supply prototype is built, and the experimental results verify the feasibility of the proposed scheme and the validity of the theoretical analysis.

• Industrial Engineering and Management Systems
• /
• 제9권3호
• /
• pp.227-241
• /
• 2010

A memory module industry's supply chain usually consists of multiple manufacturing sites and multiple distribution centers. In order to fulfill the variety of demands from downstream customers, production planners need not only to decide the order allocation among multiple manufacturing sites but also to consider memory module industrial characteristics and supply chain constraints, such as multiple material substitution relationships, capacity, and transportation lead time, fluctuation of component purchasing prices and available supply quantities of critical materials (e.g., DRAM, chip), based on human experience. In this research, a directed graph-based supply network planning (DGSNP) model is developed for memory module industry. In addition to multi-site order allocation, the DGSNP model explicitly considers production planning for each manufacturing site, and purchasing planning from each supplier. First, the research formulates the supply network's structure and constraints in a directed-graph form. Then, a proposed genetic algorithm (GA) solves the matrix form which is transformed from the directed-graph model. Finally, the final matrix, with a calculated maximum profit, can be transformed back to a directed-graph based supply network plan as a reference for planners. The results of the illustrative experiments show that the DGSNP model, compared to current memory module industry practices, determines a convincing supply network planning solution, as measured by total profit.

• Journal of Power Electronics
• /
• 제17권5호
• /
• pp.1382-1390
• /
• 2017

This paper presents a power supply for gate drivers, which uses a magnetic resonance wireless power transfer system. Unlike other methods where multiple antennas are used to supply power for the gate drivers, the proposed method uses a single antenna in an insulated receiver to make multiple mutually isolated power supplies. The power transmitted via single antenna is distributed to multiple power supplies for gate drivers through resonant capacitors connected in parallel that also block DC bias. This approach has many advantages over other methods, where each gate driver needs to be supplied with power using multiple receiver antennas. The proposed method will therefore lead to a reduction in production costs and circuit area. Because the proposed circuit uses a high resonance frequency of 6.78 MHz, it is possible to implement a transmitter and a receiver using a small-sized spiral printed-circuit-board-type antenna. This paper used a single phase-leg circuit configuration to experimentally verify the performance characteristics of the proposed method.

• 한국컴퓨터정보학회논문지
• /
• 제7권2호
• /
• pp.79-86
• /
• 2002

본 논문은 다중 공급 전압을 이용한 저 전력 스케쥴링 및 할당 알고리듬을 제안한다. 다중 공급 전압스케쥴링에서는 전력소비를 줄이기 위해 다른 전압 레벨을 이용해 실험적으로 가능한 연산을 수행하여 제어 스텝을 결정한다. 그리고 다중 공급 전압 할당에서는 그래프 컬러링 기법을 이용해 레지스터 상의 스위칭 활동을 최소화한다. 상위 레벨 벤치마크 예제를 이용한 실험으로부터 우리는 다중 공급 전압을 이용한 제안한 알고리듬이 전력 소비를 줄이는데 효율적임을 보인다.

• 한국농공학회지
• /
• 제39권2호
• /
• pp.9-18
• /
• 1997

Abstract This paper presents a heuristic method for optimal design of water distribution system with multiple sources and potential links. In multiple source pipe network, supply rate at each source node affects the total cost of the system because supply rates are not uniquely determined. The Linear Minimum Cost Flow (LMCF) model may be used to a large scale pipe network with multiple sources to determine supply rate at each source node. In this study the heuristic method based on the LMCF is suggested to determine supply rate at each source node and then to optimize the given layout. The heuristic method in turn perturbs links in the longest path of the network to obtain the supply rates which make the optimal design of the pipe network. Once the best tree network is obtained, the frequency count of reconnecting links by considering link failure is in turn applied to form loop to enhance the reliability of the best tree network. A sample pipe network is employed to test the proposed method. The results show that the proposed method can yield a lower cost design than the LMCF alone and that the proposed method can be efficiently used to design irrigation systems or rural water distribution systems.

• 한국과학교육학회지
• /
• 제34권1호
• /
• pp.1-9
• /
• 2014

이 연구는 과잉효능감과 과잉확신이 선다형과 서답형 평가에서 어떻게 나타나는지에 조사하였다. 이 연구를 위하여 204명의 여자중학교 학생들이 참여하였다. 선다형과 서답형으로 된 광합성 개념에 대한 검사도구를 사용하였으며, 각 문항마다 자신의 효능감과 확신을 척도로 나타나게 하였다. 연구결과 선다형과 서답형의 상관관계는 0.5가 채 되지 않았으며, 학생들이 생각하는 자신의 문제 해결 능력(효능감)과 실제 능력 간의 상관관계 역시 0.45가 되지 않았다. 학생들은 선다형 문제 해결 과정에서 지식에 대한 확신을 높이는 경향을 보였다. 선다형 문항을 먼저 수행한 집단에서는 그렇지 않은 집단에 비하여 과잉효능감과 과잉확신의 비율이 더 높게 나타났다. 이 연구 결과는 학생들을 평가하는 과정에서 서답형의 사용을 늘릴 것을 제언한다. 또한 두 형태의 검사도구를 동시에 사용하게 될 경우 선다형 검사도구를 사후에 사용하여 학생들이 적절한 수준의 효능감과 확신을 유지할 수 있도록 해야 될 것이다.

• Journal of Electrical Engineering and Technology
• /
• 제10권3호
• /
• pp.1221-1226
• /
• 2015

This paper proposes a multiple switch mode power supply (SMPS) system based on the wireless network which controls variable load. The system enables power supply of up to 600W using 200W SMPS as a unit module and provides a controlling function of output power based on variable load and a monitoring function based on wireless network. The controlling function for output power measures the variation of output power and facilitates efficient power supply by controlling output power based on the measured variation value. The monitoring function guarantees a stable power supply by observing the multiple SMPS system in real time via wireless network. The performance of the proposed system was examined by various experiments. In addition, it was verified through standardized test of Korea Testing Certification. The results were given and discussed.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.148-153
• /
• 2009

This paper considers the age of air in a ventilated space with multiple supply inlets. The local mean age of air at a point from one supply inlet is different from those from the other supply inlets. It is the purpose of the present paper to investigate theoretically the relations between the LMA's from each supply and overall combined LMA whether or not to trace the origins of supply air. Transient concentration distributions are calculated with a step-up injection of tracer gas at each supply inlet, and at both inlets simultaneously. The steady state concentration with a continuous tracer injection at a supply inlet works as a weighting factor for the corresponding LMA in calculating the average overall LMA from multiple inlets.

• 한국국방경영분석학회지
• /
• 제6권2호
• /
• pp.69-88
• /
• 1980

A stochastic fundamental duel with continous interfiring times is considered for including the kill effect of multiple hits and fixed duel time. Two alternatives, 'vital hit' and 'damage coefficient' approaches, are developed. Since a large quantity of ammunition is consumed when a sure kill is obtained through repetitive multiple hits, limitation of initial ammunition supply is included in the stochastic duel models with multiple hits and fixed duel time. General solutions are obtained and examples with negative exponential interfiring times and geometric ammunition supply are given.