• Journal of Welding and Joining
• /
• v.34 no.2
• /
• pp.67-72
• /
• 2016

Aluminum alloy is one of light weight material and it is used to make LNG tank and ship. However, in order to weld aluminum alloy high density heat source is needed. In this paper, I-butt welding of Al 5083 with 6mm thickness using Plasma-MIG welding was carried out. The experiment was performed to investigate the influence of plasma-MIG welding parameters such as plasma current, wire feeding rate, MIG-welding voltage and welding speed on the tensile strength of weld. In addition we suggested 3 strength estimation models which are second order polynomial regression model, multiple nonlinear regression model and neural network model. The estimation performance of 3 models was evaluated in terms of average error rate (AER) and their values were 0.125, 0.238, and 0.021 respectively. Neural network model which has training concept and reflects non -linearity was best estimation performance.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.4
• /
• pp.408-417
• /
• 2019

Non-destructive test techniques are becoming increasingly important for assessment and maintenance. These techniques are very useful for assessment of materials such as wood, whose performance can vary considerably depending on the conditions of use. It is possible to estimate some mechanical properties of a material by determining the movement of energy through the material with the help of these techniques. In this study, it was investigated whether the wood material could be tested nondestructively by the heat energy produced by a source. The correlations between the thermal conductivity and mechanical properties of Scots pine (Pinus sylvestris L.) and sessile oak (Quercus petraea L.) woods were investigated. The thermal conductivity (TC), density, modulus of rupture (MOR), compression strength (CS), and modulus of elasticity (MOE) values of samples were measured according to the related standards and these values were correlated with each other. The linear and multiple regression tests were employed to determine the correlation between thermal conductivity and mechanical properties. The results showed that there is a very strong correlation between thermal conductivity and both density and MOR values. However, the correlations between TC and both MOE and CS were moderate. The results of this study suggest that the thermal conductivity value can be used to estimate the density and some mechanical properties of wood.

• Journal of the Mineralogical Society of Korea
• /
• v.16 no.3
• /
• pp.265-280
• /
• 2003

The Mugeuk mineralized area that associated with the pull-apart type Cretaceous Eumseong basin is composed of several gold-silver vein deposits that are emplaced in late Cretaceous biotite granite. The gold-silver deposits in the area show various hydrothermal alteration zones as well as Au/Ag ratios and ore mineralogy. The Geumbong mine showing relatively high gold fineness is composed of multiple veins and show alteration pattern; vein \longrightarrow phyllic \longrightarrow subphyllic \longrightarrow propylitic \longrightarrow subpropylitic zone. In contrast, The Taegeuk mines show the low fineness values, in far southern part are characterized by increasing tendency of simple and/or stockwork veins. The deposit displays alteration pattern; vein \longrightarrow propylitic \longrightarrow subpropylitic zone. Variations of alteration zone with depth show that phyllic zone are dominant in deeper level and propylitic zone sporadically overlapped by argillic zone are dominant in shallow level. The differences of alteration pattern between the gold-silver deposits are reflect the evolution of the hydrothermal fluids; the ore-forming fluids of the Geumbong mine are at relatively high temperature and salinity and highly-evolved meteoric water, developing phyllic zone, the Taegeuk mine containing greater amounts of less-evolved meteoric waters shows relatively low temperature and salinity in ore-forming fluids, developing propylitic zone. The various physicochemical environment for gold-silver mineralization in the Mugeuk mineralized area is due to proximity from heat source area (Mugeuk mine) to marginal area (Taegeuk mine) in a geothermal field. Therefore, it is suggested that the criteria for project exploration in the area are to focus on the area proximal to heat source and phyllic zone.

• Fire Science and Engineering
• /
• v.34 no.2
• /
• pp.14-21
• /
• 2020

This paper presents the study of a fire risk to the backside of two miniatures of ISO 9705 2/5 using a lightweight partition for indoor space division and reproduction of the ISO 9705 test. An SGP partition, stud partition, glass wool panel, urethane foam panel, sandwich panel, and glass partition were selected as the test specimens, which are frequently used in construction. According to the ISO 9705 test standard, stabilization was achieved using a measuring device that recorded data before the ignition of a burner and continued recording for 120 s thereafter. After ignition was achieved, the power was increased to 300 kW for 600 s and then reduced to 100 kW for 600 s. The specimens were subsequently observed for 180 s, and the fire risk to the backside and the fire pattern of the wall unit were analyzed. Owing to the amount of heat generated by the ignition source, the maximum temperature of the backside was observed to be 67.7 ℃ for the SGP partition, 55.1 ℃ for the stud partition, 52.4 ℃ for the glass wool panel, 727.4 ℃ for the sandwich panel, 561 ℃ for the urethane foam panel, and 630.5 ℃ for the glass partition. In the cases of the sandwich and urethane foam panels, the explosion of flammable gas occurred by virtue of fusion of the interior materials. The reinforced glass was fractured owing to the temperature difference between the heat- and nonheat-responsive parts. Ultimately, the fire risk to the nearby section room was deemed to be high.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.10
• /
• pp.1507-1516
• /
• 2002

Meat and bone meal is a valuable protein and mineral source in diets of production animals and contributes to the protein, energy and mineral component of diets. The aim of the present study was to more accurately characterise the apparent ileal amino acid digestibility of meat and bone meals produced in New Zealand and evaluate routine in vitro assays used in practise to measure meat and bone meal quality. A total of 94 commercial meat and bone meals from 25 New Zealand rendering plants over a two and a half year period were analysed for proximates, gross energy, gross amino acid content (incl. hydroxyproline, hydroxylysine and lanthionine), apparent ileal amino acid digestibility, pepsin nitrogen digestibility, protein solubility and bone content. The mean crude protein content of the 94 meat and bone meal samples was 56.8% with a range of >35% units and a coefficient of variation of 9.8%. The mean crude fat and ash content were 10.0 and 28.4% respectively. These latter components showed a large range (16 and 43%, respectively) with coefficients of variation above 22%. Amino acid digestibility between samples was highly variable with lysine and sulphur amino acids digestibility ranging between 45.8-89.0 and 38.2-85.5%, respectively. Pearson correlation coefficients are presented between crude protein content and individual gross amino acids, crude protein content and individual digestible amino acid content, and pepsin N digestibility and individual digestible amino acid content. There was a significant relationship between the digestible amino acid nitrogen content and the crude protein content while pepsin nitrogen digestibility was not correlated to ileal amino acid nitrogen digestibility (r=-0.06). Meat meals with a high protein content had relatively low hydroxyproline and hydroxylysine levels something that was attributed to the levels of collagen from bone. The data indicated that lanthionine (formed upon heat treatment of cysteine with a hydroprotein) is not a good indicator of the heat treatment employed to meat and bone meals. Step-wise multiple regression equations to predict the apparent digestible content of amino acids from rapid in vitro assays are presented. The most selected variables included ash and crude fat content. In general the equations derived for the essential amino acids had a higher degrees of fit (R2) compared to the non-essential amino acids. The R2 for the essential amino acids ranged from 0.43 for histidine and 0.68 for leucine. These equations provide a means of more rapidly estimating the apparent ileal digestible amino acid content (protein quality) of meat and bone meal using standard analyses.

• Korean Journal of Veterinary Research
• /
• v.29 no.4
• /
• pp.493-501
• /
• 1989

A total of 108 strains of C jejuni isolated from pigs and chickens were examined for the susceptibility to 10 antimicrobial agents and normal sera of cattle, sheep, guinea pigs and chickens. Minimal inhibitory concentration(MIC) ranges of antimicrobial agents to C jejuni isolates were $${\leq_-}1.56$$ to $${\geq_-}100{\mu}g/ml$$ for erythromycin, rifampin, streptomycin and tetracycline, 50 to $${\geq_-}100{\mu}g$$ for cephalothin, $${\leq_-}1.56$$ to $50{\mu}g$ for ampicillin, $${\leq_-}1.56$$ to $25{\mu}g$ for kanamycin and nalidixic acid, $${\leq_-}1.56$$ to $12.5{\mu}g$ for chloramphenicol and gentamicin. Resistance rates of C jejuni were showed to in order of rifampin(84.7%), tetracycline(56.2 %), erythromycin(17.1%) and ampicillin(3.8%), all of the strains were sensitive to chloramphenicol, gentamicin and kanamycin, and the incidence rates of resistant C jejuni were highly frequent in pig isolates than chicken isolates. The drug resistance patterns of 87 chicken isolates C jejuni to 9 antimicrobial drugs were showed 12 patterns, and Sm Ra Tc(24.1%), Sm Ra(21.8%) and Ra Tc(14.9%) were relatively common, and also 21 pig isolates were showed 6 patterns and Em Sm Ra Tc(57.1%) were most frequent. The majority of the isolates showed multiple drug resistance. Bactericidal activity of 10% normal sera from healthy animals were examined for 60min at $37^{\circ}C$. C jejuni were decreased from 0.4 to 1.0 ${\log}_{10}$(p<0.01), and serum susceptibility were high in order of guinea pig, sheep, chicken and cattle sera. Serum sensitivity of C jejuni Ch-39 strain in increased serum concentation up to 10, 20, 40 and 80% were highly significant. In the normal animal serum, the number of Ch-39 strain were decreased from $1.8{\times}10^4/ml$ to $2.7{\times}10^3/ml$ after 60 min incubation(p<0.01), but the numbers were decreased to $6.6{\times}10^3/ml$ in the heat inactivated normal serum for 30 min at $56^{\circ}C$. Bactericidal activity was restored in the heat inactivated normal serum after the serum of complement source was added.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.4
• /
• pp.223-231
• /
• 2012

The purpose of this study is to investigate basically the mechanism of heat transfer by the resolution of complex fluid flow inside a sophisticated designed screw dryer for the treatment of sewage sludge by using numerical analysis and experimental study. By doing this, the result was quite helpful to obtain the design criteria for enhancing drying efficiency, thereby achieving the optimal design of a multiple screw type dryer for treating inorganic and organic sludge wastes. One notable design feature of the dryer was to bypass a certain of fraction of the hot combustion gases into the bottom of the screw cylinder, by the fluid flow induction, across the delicately designed holes on the screw surface to agitate internally the sticky sludges. This offers many benefits not only in the enhancement of thermal efficiency even for the high viscosity material but also greater flexibility in the application of system design and operation. However, one careful precaution was made in operation in that when distributing the hot flue gas over the lump of sludge for internal agitation not to make any pore blocking and to avoid too much pressure drop caused by inertial resistance across the lump of sludge. The optimal retention time for rotating the screw at 1 rpm in order to treat 200 kg/hr of sewage sludge was determined empirically about 100 minutes. The corresponding optimal heat source was found to be 150,000 kcal/hr. A series of numerical calculation is performed to resolve flow characteristics in order to assist in the system design as function of important system and operational variables. The numerical calculation is successfully evaluated against experimental temperature profile and flow field characteristics. In general, the calculation results are physically reasonable and consistent in parametric study. In further studies, more quantitative data analyses such as pressure drop across the type and loading of drying sludge will be made for the system evaluation in experiment and calculation.

• Korean Journal of Weed Science
• /
• v.30 no.4
• /
• pp.340-360
• /
• 2010

The depletion of fossil fuels, ecological problems associated with $CO_2$ emissions climate change, growing world population, and future energy supplies are forcing the development of alternative resources for energy (heat and electricity), transport fuels and chemicals: the replacement of fossil resources with $CO_2$ neutral biomass. Several options exist to cover energy supplies of the future, including solar, wind, and water power; however, chemical carbon source can get from biomass only. When used in combination with environmental friend production and processing technology, the use of biomass can be seen as a sustainable alternative to conventional chemical feedstocks. The biorefinery concept is analogous to today's petroleum refinery, which produce multiple fuels and chemical products from petroleum. A biorefinery is a facility that integrates biomass conversion processes and equipment to produce fuels, power, and value-added chemicals from biomass. Biorefinery is the co-production of a spectrum of bio-based products (food, feed, materials, and chemicals) and energy (fuels, power, and heat) from biomass [definition IEA Bioenergy Task 42]. By producing multiple products, a biorefinery takes advantage of the various components in biomass and their intermediates therefore maximizing the value derived from the biomass feedstocks. A biorefinery could, for example, produce one or several low-volume, but high-value, chemical or nutraceutical products and a low-value, but high-volume liquid transportation fuel such as biodiesel or bioethanol. Future biorefinery may play a major role in producing chemicals and materials as a bridge between agriculture and chemistry that are traditionally produced from petroleum. Industrial biotechnology is expected to significantly complement or replace the current petroleum-based industry and to play an important role.

• Korean Journal of Food Science and Technology
• /
• v.40 no.1
• /
• pp.101-105
• /
• 2008

Enterobacter sakazakii is implicated in severe forms of neonatal infections such as meningitis and sepsis. This organism has been isolated from a wide range of foods, including cheese, vegetables, grains, herbs, and spices, but its primary environment is still unknown. Generally, dried infant milk formula has been epidemiologically identified as the source of E. sakazakii. Sunsik (a powdered mixture of roasted grains and other foodstuffs) is widely consumed in Korea as a side dish or energy supplement. Sunsik is consumed without heat treatment; thus, lacking an additional opportunity to inactivate foodborne pathogens. Therefore, its microbiological safety should be guaranteed. In this study, the prevalence of E. sakazakii was monitored in 23 different sunsik component flours, using FDA recommended methods; but E. sakazakii medium (Neogen) and Chromogenic E. sakazakii medium (Oxoid) were used as the selective media. In total, presumptive E. sakazakii strains were isolated from 8 different sunsik powders. Subsequently, an API 20E test was conducted, and 15 strains from 5 different sunsik flours (sea tangle, brown rice, non-glutinous rice, cheonggukjang, dried anchovy) were confirmed as E. sakazakii. Fifteen strains were again confirmed by PCR amplification, using three different primer sets (tDNA sequence, ITS sequence, 16S rRNA sequence), and compared to ATCC strains (12868, 29004, 29544, 51329). They were once again confirmed by their enzyme production profiles using an API ZYM kit. Finally, RAPD (random amplified polymorphic DNA)-genotyping was carried out as a monitoring tool to determine the contamination route of E. sakazakii during processing.

• Economic and Environmental Geology
• /
• v.51 no.1
• /
• pp.67-76
• /
• 2018

This study reviews three eco-friendly energy towns with hybrid thermal energy supply systems and borehole thermal energy storage (BTES) in Canada and Denmark. The district heating and cooling systems were designed by using multi-source energy for the higher efficiency and reliability as well as environment. ADEU (Alexandra District Energy Utility) located at the developing area in the city of Richmond, Canada was designed to supply district energy with the installation of 726 borehole heat exchangers (BHEs) and a backup boiler using natural gas. DLSC (Drake Landing Solar Community) located in the town of Okotoks, Canada is a district system to store solar thermal energy underground during the summer season by seasonal BTES with 144 BHEs. Brædstrup Solpark district heating system located in Denmark has been conducted energy supply from multiple energy sources of solar thermal, heat pump, boiler plants and seasonal BTES with 48 BHEs. These systems are designed based on social and economic benefits as well as nature-friendly living space according to the city based energy perspective. Each system has the energy center which distribute the stored thermal energy to each house for heating during the winter season. The BHE depth and ground thermal storage volume are designed by the heating and cooling load as well as the condition of ground water flow and thermophysical properties of the ground. These systems have been proved the reliance and economic benefits by providing consistent energy supply with competitive energy price for many years. In addition, the several expansions of the service area in ADEU and Brædstrup Solpark have been processed based on energy supply master plan. In order to implement this kind of project in our country, the regulation and policy support of government or related federal organization are required. As well as the government have to make a energy management agency associated with long-term supply energy plan.