• Journal of Periodontal and Implant Science
• /
• 제33권4호
• /
• pp.705-715
• /
• 2003

Procedures for treatment of molar furcation invasion defects range from open flap debridement, apically repositioned flap surgery, hemisection, tunneling or extraction, to regenerative therapies using bone grafting or guided tissue regenerative therapy, or a combination of both. Several clinical evaluations using regenerative techniques have reported the potential for osseous repair of treated furcation invasions. Regenerative treatment of maxillary molars are more difficult due to the multiple root anatomy and multiple furcation entrances therefore, purpose of this study was to evaluated histologically compomer and Ketac Silver as a barrier in the treatment of a bi-furcated maxillary premolar. Five adult beagle dogs were used in this experiment. With intrasulcular and crestal incision, mucoperiostcal flap was elevated. Following decortication with 1/2 high speed round bur, furcation defect was made on maxillary premolar. 2 month later one premolar was filled with compomer and the other premolar was filled with Ketac Silver. After 4, 8 weeks, the animals were sacrificed by vascular perfusion. Tissue block was excised including the tooth and prepared for light microscope with H-E staining. Results were as follows. 1. Compomer & Ketac Silver restoration were encapsulated fine connective tissue. 2. In 4 weeks, compomer & Ketac Silver restoration slightly infiltrated inflammatory cells but not disturb the new bone or new cementum formation. 3. In 8 weeks, compomer & Ketac Silver restoration were less infiltrated iflammatory cell and encapsulated fine connective tissue. 4. Therefore, compomer & Ketac Silver filling to the grade III maxillary furcations with multiple root anatomy and multiple furcation entrances is possible clinical method and this technique is useful method for maxillary furcation involvement but it is thought that periodic maintenance should be needed

• Journal of Periodontal and Implant Science
• /
• 제30권4호
• /
• pp.793-803
• /
• 2000

Procedures for treatment of molar furcation invasion defects range from open flap debridement, apically repositioned flap surgery, hemisection, tunneling or extraction, to regenerative therapies using bone grafting or guided tissue regenerative therapy, or a combination of both. Several clinical evaluations using regenerative techniques have reported the potential for osseous repair of treated furcation invasions. Regenerative treatment of maxillary molars are more difficult due to the multiple root anatomy and multiple furcation entrances therefore, purpose of this study was to evaluated histologically self-curing glass-ionomer cement and light-curing glass-ionomer cement as a barrier in the treatment of a bi-furcated maxillary premolar. Five adult beagle dogs were used in this experiment. With intrasulcular and crestal incision, mucoperiosteal flap was elevated. Following decortication with 1/2 high speed round bur, degree II furcation defect was made on maxillary third(P3), forth(P4) and fifth(P5) premolar. 2 month later experimental group were self-curing glassionomer cement and light-curing glassionomer cement. After 4, 8 weeks, the animals were sacrificed by vascular perfusion. Tissue block was excised including the tooth and prepared for light microscope with Gomori's trichrome staining. Results were as follows. 1. In all experiment group, there were not epithelial down growth and glass ionomer cement were encapsulated connective tissue. 2. In 4 weeks experiment I group slighly infiltrated inflammatory cells but not disturb the new bone or new cementum formation. 3. In 8 weeks, experiment groups I, II were encapsulated fine connective tissue. 4. Therefore glass-ionomer cement filling to the grade III maxillary furcations with multiple root anatomy and multiple furcation entrances were possible clinical methods and this technique is useful method for Maxillary furcation involvement.

• 대한기계학회논문집A
• /
• 제28권11호
• /
• pp.1741-1751
• /
• 2004

It is commonly requested that the steam generator tubes wall-thinned in excess of 40% should be plugged. However, the plugging criterion is known to be too conservative for some locations and types of defects and its application is limited to a single crack in spite of the fact that the occurrence of multiple through-wall cracks is more common in general. The objective of this research is to propose the optimum failure prediction models for two adjacent through-wall cracks in steam generator tubes. The conservatism of the present plugging criteria was reviewed using the existing failure prediction models for a single crack, and six new failure prediction models for multiple through-wall cracks have been introduced. Then, in order to determine the optimum ones among these new local or global failure prediction models, a series of plastic collapse tests and corresponding finite element analyses for two adjacent through-wall cracks in thin plate were carried out. Thereby, the reaction force model, plastic zone contact model and COD (Crack-Opening Displacement) base model were selected as the optimum ones for assessment of steam generator tubes with multiple through-wall cracks. The selected optimum failure prediction models, finally, were used to estimate the coalescence pressure of two adjacent through-wall cracks in steam generator tubes.

• Clinical and Experimental Pediatrics
• /
• 제58권7호
• /
• pp.256-262
• /
• 2015

Purpose: Kabuki syndrome is a multiple congenital malformation syndrome, with characteristic facial features, mental retardation, and skeletal and congenital heart anomalies. However, the cardiac anomalies are not well described in the Korean population. We analyzed the cardiac anomalies and clinical features of Kabuki syndrome in a single tertiary center. Methods: A retrospective analysis was conducted for a total of 13 patients with Kabuki syndrome. Results: The median age at diagnosis of was 5.9 years (range, 9 days to 11 years and 8 months). All patients showed the characteristic facial dysmorphisms and congenital anomalies in multiple organs, and the diagnosis was delayed by 5.9 years (range, 9 days to 11 years and 5 months) after the first visit. Noncardiac anomalies were found in 84% of patients, and congenital heart diseases were found in 9 patients (69%). All 9 patients exhibited left-side heart anomalies, including hypoplastic left heart syndrome in 3, coarctation of the aorta in 4, aortic valve stenosis in 1, and mitral valve stenosis in 1. None had right-side heart disease or isolated septal defects. Genetic testing in 10 patients revealed 9 novel MLL2 mutations. All 11 patients who were available for follow-up exhibited developmental delays during the median 4 years (range, 9 days to 11 years 11 months) of follow-up. The leading cause of death was hypoplastic left heart syndrome. Conclusion: Pediatric cardiologist should recognize Kabuki syndrome and the high prevalence of left heart anomalies with Kabuki syndrome. Genetic testing can be helpful for early diagnosis and counseling.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.204-207
• /
• 2001

The bending process for the circular curved tube and rectangular curved tube with fins can be developed by the hot metal extrusion machine with the multiple punches moving in the different velocity. The bending phenomenon can be controlled by the two variables. The one of them is the difference of velocity at the die exit section by the different velocity of billets through the multi-hole container. The other is the one by the different hole diameter. The results of the experiment show that the circular curved tube with fins and rectangular curved tube with pins can be formed by the extrusion process and that the curveture of the product can be controlled by the velocity of punch and diameter of container hole and that the defects such as the distortion of section and the thickness change of the wall of tube the folding and wrinkling of thin tube and fins did not happen after the bending processing by the extrusion bending machine.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.212-215
• /
• 2001

The bending process for the rectangular curved tube can be developed by the hot metal extrusion machine with the multiple punches moving in the different velocity. The bending phenomenon can be controlled by the two variables, the one of them is the difference of velocity at the die exit section by the different velocity of billets through the multi-hole container. The other is the difference by the different hole diameter. The results of the experiment show that the rectangular curved tube can be formed by the extrusion process and that the curvature of the curved product can be controlled by the velocity of punch and the diameter of container hole and that the defects such as the distortion of section and the thickness change of the wall of tube and the folding and wrinkling of thin tube did not happen after the bending processing by the extrusion bending machine.

• 한국동물생명공학회지
• /
• 제34권3호
• /
• pp.253-258
• /
• 2019

A female English bulldog was gave birth two neonates by cesarean section on the sixty one days after mating, but both neonates were died soon after birth. The bodies of neonates were diagnosed using radiography, ultrasonography, computed tomography and necropsy immediately after death. Both neonates had caudal regression syndrome, butterfly vertebra, hydrocephalus, umbilical hernia, cleft palate and bow-legged hind-limb. At necropsy, neonates had mild fetal anasarca, cleft lip and the skull was remained non-union. At thoracic cavity, only three ribs and thoracic spines were existed and patent ductus arteriosus was found. At abnormal cavity, the renal ectopia was found with abnormal morphology. In the present case, those English bulldog neonates with multiple congenital malformation syndromes seriously suffered vertebral column anomalies and that may induced by neural tube defects in during embryonic period. To prevent congenital malformation occurring in English bulldog, further in depth studies are needed for the breed specific genetic diversity and for the reason of behind genetic abnormality in these breed.

• 소성∙가공
• /
• 제11권3호
• /
• pp.262-268
• /
• 2002

The bending process for the rectangular and circular curled tube can be developed by the hot metal extrusion machine with the multiple punches moving in the different velocity. The bending phenomenon has been known to be occurred by the different of velocity at the die exit. The difference of velocity at the die exit section can be obtained by the different velocity of billets through the multi-hole container and by the cohesion of billet Inside the porthole die chamber. The bending phenomenon can be controlled by the two variables, the one of them is the difference of velocity at the die edit section by the different velocity of billets through the multi-hole container The other is the difference by the different hole diameter The results of the experiment show that the rectangular curved tube can be formed by the extrusion process, that the curvature of the curved product can be controlled by the velocity of punch and the diameter of container hole, that the defects such as the distortion of section and the thickness change of the wall of tube and the folding and wrinkling of thin tube did not happen after the extra-bending processing by the extrusion bending machine.

• 한국음향학회지
• /
• 제14권2호
• /
• pp.92-100
• /
• 1995

본 연구에서는 결함이 있는 볼베어링을 모델링하여 결함의 형태별로 진동분석을 하였다. 진동측정은 단일결함과 복합결함이 있는 볼베어링에 대하여 결함위치와 회전속도 변화에 대한 진동신호를 측정하고, 신호 성분들은 고주파 공진기법을 이용해 FFT시켰다. 실험결과 단일결함과 복합결함이 있을 때 결함으로 인해 발생하는 주파수는 결함 특성 주파수와 그 배수의 고조파 성분 피크들이 나타남을 확인하였다. 고주파 공진기법을 이용한 신호처리는 결함의 유무 뿐만 아니라 결함의 부위도 진단이 가능함을 알 수 있었다.

• 한국가정과학회지
• /
• 제2권1호
• /
• pp.99-109
• /
• 1999

The purpose of this study is to evaluate the combination of tailored suit details through visual evaluation which helps compensating middle aged women＇s body defects for their more attractive fashion styles. The data evaluated by a multiple ranking test were analyzed using mean, paired t-test, general linear measure and Duncan＇s multiple raged test. The results of this study are as follows: 1) The middle aged woman wearing the opened flap pocket-jacket and slacks looks longer(p〈0.001) in lower part of her body and taller(P〈0.01) as a whole than when wearing others. And, opened jacket makes a middle aged woman be seen with less appeared abdomen(p〈0.01) than that wearing others. 2) The middle aged woman wearing the opened flap pocket-jacket and skirt looks more elegant(p〈0.001), more graceful(p〈0.001), and a bit more balanced(p〈0.05) than that wearing the opened flap pocket-jacket and slacks suits. According to situation(TPO). the middle aged women wearing the opened flap pocket-jacket, and slacks or skirt looks more effective the visual effect in combination of details on Tailored suits. (Korean J of Human Ecology 2(1) : 99-109, 1999)