• Journal of the Korean institute of surface engineering
• /
• v.43 no.2
• /
• pp.111-120
• /
• 2010

In this study, the effects of multi-complex agents addition on characteristics of electroless Ni plating solution are investigated. The species and the concentration of complexing agents are major factors to control the deposition rate, P concentration, and surface morphology of plating films. Adipic acid increases the deposition rate in regardless of single- or mutli-complex agent addition. However, lactic acid effectively increases the deposition rate in case of multi-addition as the complex agents with adipic or sodium succinate acid. In addition, sodium citric acid and malic acid show good stabilizing effects of plating solution and lowering the deposition rate, because they have high complexibility. Therefore, it is suggested that the development of Ni-P plating solution suitable for diverse usages can be carried out systematically using the database from this study.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.3
• /
• pp.265-272
• /
• 2004

Based on the T-method, a new scheme for predicting air flow rate distribution in a bathroom exhaust system is developed. Introduction of individual duct route enables us to disintegrate a complicated multi-fan ductwork into a set of simultaneous single-fan subsystems. The scheme is validated via the analysis of a well-posed test problem, showing physical consistency. In order to demonstrate the utility and capability of our method, the bathroom ventilation system in a 20-story residential building is selected as an example. Under the typical design condition, the air flow rate of each exhaust fan at the balancing point is successfully predicted, and such information can lead to an engineering estimation for the overall system performance. While some deficiencies in ventilation are found at bathrooms at lower floors with 6mmAq-rated exhaust fans, they disappear over the whole building by using fans of enhanced static pressures, 7 and 8mmAq. Finally the present scheme seems to be useful for practical design of multi-branched, multi-fan ventilation systems.

• Communications for Statistical Applications and Methods
• /
• v.14 no.2
• /
• pp.377-388
• /
• 2007

As one of multi-class classification methods, ECOC (Error Correcting Output Coding) method is known to have low classification error rate. This paper aims at suggesting effective multi-class classification method (1) by comparing various encoding methods and decoding methods in ECOC method and (2) by comparing ECOC method and direct classification method. Both SVM (Support Vector Machine) and logistic regression model were used as binary classifiers in comparison.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04c
• /
• pp.301-303
• /
• 2003

기존의 아이디와 패스워드를 이용한 사용자 인증방식의 문제점 및 한계를 해결하기 위하여 생체인식 기술 (Biometric technology)이 연구되었다. 하지만 단일 생체인식 기술은 오인식률(False Acceptance Rate), 오거부율(False Rejection Rate)등의 문제점을 가지고있다. 최근에 단일 생체인식 기술의 한계를 극복하고 사용자 인증 성능 향상과 신뢰도를 높이기 위하여 다중 생체 인식(Multi-modal biometrics)에 관한 연구개발이 활발하다. 이 논문은 지문인식과 얼굴인식 기술을 활용하여 사용자 인증을 수행함으로써 단일 시스템에서 발생하는 한계점을 극복함과 동시에 좀더 안정적인 사용자 인증이 가능한 방법을 제시한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.286-289
• /
• 1996

Two servo control algorithms are suggested to reduce the tracking error of a computer hard disk drive. One is the repetitive control to reduce the repeatable tracking error which is not explicitly taken into account in the design of a conventional controller. This algorithm was successfully applied to a commercial disk using a fixed point DSP. The other is the multi-rate sampling control which generates the control output between each sampling times since the sampling time of hard disk drives is limited. These algorithms were shown effectively to reduce tracking errors.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.282-284
• /
• 2003

Multi-phase extraction of LNAPLs not only floating on groundwater but also captured in soil pores was studied in a simulated soil system. The extraction rate of LNAPL under the MPE conditions was much higher than the rate under usual hydraulic gradient conditions. The WE might be especially useful for recovery of oils in fine-textured soils such as clay-dominant soils. The vacuum-enhanced transport of LNAPL in soils also depended on the properties of LNAPL such as viscosity and density as well as soil textures.

• 유체기계공업학회:학술대회논문집
• /
• 2005.12a
• /
• pp.278-283
• /
• 2005

Generally Jar-Test is available to determine the coagulant dosage rate. Disadventages associated with Jar-Test are that regular samples have to be taken requiring manual intervention and the limitation to feedback control. To deal with this difficulty, determined optimized dosage rates of coagulant to investigates the union operation method of the statistical equation which uses the multi-regression method and the SCD.

• 유체기계공업학회:학술대회논문집
• /
• 2004.12a
• /
• pp.275-281
• /
• 2004

Generally Jar-Test is available to determine the coagulant dosage rate. Disadventages associated with Jar-Test are that regular samples have to be taken requiring manual intervention and the limitation to feedback control. To deal with this difficulty, determined optimized dosage rates of coagulant to Investigates the union operation method of the statistical equation which uses the multi-regression method and the SCD.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.5-6
• /
• 2007

Routing protocol based on multi-rate previously Proposed has a advantage that it efficiently uses channel, but it has a disadvantage that it has a overhead that it increases control packets for route set up. Therefore, this paper propose a mechanism that decreases control packet overhead and simulates this mechanism using NS-2.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.04a
• /
• pp.1264-1266
• /
• 2009

We introduce a location-based routing model applied for grid backbone nodes in wireless mesh network. The number of paths with nearest distance between two nodes is calculated and used as key parameter to execute routing algorithm. Node will increase the transmission range that makes a trade off with data rate to reach its neighbors when node itself is isolated. The routing model is lightweight and oriented thanks to the simple but efficient routing algorithm.