• 한국실내디자인학회논문집
• /
• 제16권2호
• /
• pp.347-356
• /
• 2007

The concept of time-space to be seen in the modem society has complex features at the points of scientific, philosophical, artistic, religious point of view. It has been brought up at a points of neo centric religious, philosophical view and then after, phenomenal approach and scientific approach were rendered through Newton and Einstein and so many scholar approaches affected the artistic field significantly. With such visual expression, it has affected the paintings for a long time till the 19th century, and then has affected various fields such as photography, film, video, computer, architecture and has currently affected the various space expressive of our daily lives and virtual space of digital. This study is to extract a visual and expressionistic characteristic through historical examination and multi-scholar analysis of time-space concept. Especially, by expanding the previous time and space concept, experimental cases and expressionistic characteristics has come up on the media art that offers various experience and by analyzing the expressionistic characteristics of the time-space concept expressed in media art, it is to extract the basic factors for the diversity of space experience.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 추계 학술대회논문집
• /
• pp.39-44
• /
• 2005

In HANARO, a multi-purpose research reactor of 30 MWth, the emergency water supply system consists essentially of an emergency water storage tank located in the level of about thirteen meter (13 m) above the reactor core, a three inch ('3\%') diameter water injection pipe line including injection valves from the tank to the reactor cooling inlet pipe and a test loop to do periodic system performance test. When the water level of the reactor pool comes down to the extremely low due to a loss of reactor pool water accident the emergency water stored in the tank should be fed to the core by the gravity force and at that time the design flow rate is eleven point four kilogram per second (11.4 kg/s). But it is impossible periodically to measure the injection flow rate under the emergency condition because the normal water level should be maintained during the reactor operation. This paper describes a flow network analysis to simulate the flow rate under the emergency condition. As results, it was confirmed through the analysis results that the calculated flow rate agrees with the design requirement under the emergency condition.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2007년도 춘계학술대회 논문집
• /
• pp.181-187
• /
• 2007

The world is changing drastically by digital information technology and ubiquitous networking. Meanwhile, with the demographic avalanche, South Korea officially became an 'ultra-aging society' in 2026. Simultaneously, this demographic change will also stimulate a cultural climate which facilitates the formation and dissemination of 'slow culture' from the existent urban 'fast culture' which has been weakening the retirement living. One of the fundamental connections with the slow movement appears in the cooking and dining area. With this point of view, this study aims to identify the needs and behaviors of the elderly in current restaurants and a digitally planned multi-purpose one for the future. Small group workshop was employed for this study. In order to elicit detailed information from the elderly group members, scenarios were developed. A group facilitator kept the discussion on track by asking a series of open-ended questions meant to stimulate discussion. As the results, it was revealed that the elderly were interested in digitally planned restaurant which provides one-stop service including entertainment activities, health related contents and socializing with family. Even though this study took restaurant scenarios, the ideas in them also provide holistic perspectives on the direction of marketing and planning strategies on various future environments and services.

• 한국실내디자인학회논문집
• /
• 제18권2호
• /
• pp.61-70
• /
• 2009

Architectural color would be understood as a essential tool to be reflected the architect's value criteria, thinking process and the specific methodology. This study was established the characteristics of color use correlated with Eisenman's architectural features based on his point of view. At first, it could be organized with data and use the color in view points with the becomming process. Especially it would be expressed the color as a trace of unsynchronized formation. Second, it was introduced the color by graphics engaged with form, to be expressed the dividing, folding, reiteration for deliver of escape from graphic thinking process. Third, it was analyzed to be imported the color to have a multi-lateral space experience in center of user's space recognition and behavior by introduction of color. Finally, it could be inducted the consistent color by viewpoint of interfacial between interior and exterior environment, communicated with strong meaning by conversion from interior elements to color from these processes. A characteristics of Eisenman's architecture color is reflected his thinking process in architecture color as it is and can be understand of 'becomming process use of color' as a tool that is corresponded in form creation. Specially, it would be kept continuous viewpoint of interior and exterior space, giving user color as a viewpoint of linking space, enable many-sidedness experiences through space.

• 대한전자공학회논문지SP
• /
• 제48권5호
• /
• pp.123-128
• /
• 2011

본 논문에서는 레이더의 탐지 알고리즘에 적용되는 CA-CFAR 알고리즘을 설계하였다. CFAR 알고리즘의 제곱평균 연산을 위해 근사화 기법을 사용하였으며, 고정 소수점을 이용하여 관련 연산을 처리하였다. 이러한 구조는 하드웨어 복잡도를 줄일 뿐 아니라 계산량을 감소시킬 수 있다. CFAR 연산은 슬라이딩 윈도우 기법을 기반으로 하는데, 이를 고속으로 처리하기 위해 동시 병렬 처리 가능한 다중 윈도우 방식도 제안하였다. 제안된 CA-CFAR 프로세서는 실제 FPGA를 통해 합성되어지고 구현되었다. 또한 FPGA 내에서 제공한 라이버러리를 이용한 제곱평균 연산 방법과 성능 비교를 하였다. 검증 결과 제안된 하드웨어 구조는 399MHz까지 동작가능하며, 전체 계산 시간은 약 70% 향상됨을 확인 할 수 있다.

• Journal of Communications and Networks
• /
• 제13권4호
• /
• pp.327-338
• /
• 2011

With the incitation to reduce power consumption and the aggressive reuse of spectral resources, there is an inevitable trend towards the deployment of small-cell networks by decomposing a traditional single-tier network into a multi-tier network with very high throughput per network area. However, this cell size reduction increases the complexity of network operation and the severity of cross-tier interference. In this paper, we consider a downlink two-tier network comprising of a multiple-antenna macrocell base station and a single femtocell access point, each serving multiples users with a single antenna. In this scenario, we treat the following beamforming optimization problems: i) Total transmit power minimization problem; ii) mean-square error balancing problem; and iii) interference power minimization problem. In the presence of perfect channel state information (CSI), we formulate the optimization algorithms in a centralized manner and determine the optimal beamformers using standard convex optimization techniques. In addition, we propose semi-decentralized algorithms to overcome the drawback of centralized design by introducing the signal-to-leakage plus noise ratio criteria. Taking into account imperfect CSI for both centralized and semi-decentralized approaches, we also propose robust algorithms tailored by the worst-case design to mitigate the effect of channel uncertainty. Finally, numerical results are presented to validate our proposed algorithms.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2008년도 정보통신설비 학술대회
• /
• pp.3-6
• /
• 2008

In this paper, we propose the folded PIFA with its made an alteration to a factor of resonance for L-slot PIFA. Proposed antenna maintain diminished size patch and improve each bandwidth of GSM(0.88$\sim$-0.96 GHz) and W-CDMA(1.92$\sim$2,17 GHz) for miniaturized repeater. The non-slot step folded PIFA's structure that design of essence was general L-slot PIFA for dual-band. It has no U-slot, multi band and the another slot. The parameters of proposed antenna were optimized for dual-band and compact size by folded singleness patch. Proposed antenna by using folded singleness patch take satisfaction main point, bandwidth of GSM and W-CDMA, compact patch size($39{\times}21{\times}13mm^3$). The antenna was designed by FDTD simulation tool and it was made from result of simulation. Measured data shown that the proposed non-slot step folded PIFA was strong possibility.

• Earthquakes and Structures
• /
• 제19권6호
• /
• pp.427-444
• /
• 2020

The performance of an isolated horizontally curved continuous bridge with High Damping Rubber (HDR) Bearings has been investigated under seismic loading conditions. The effectiveness of response controls of the bridge by HDR bearings for various aspects viz. variation in ground motion characteristics, multi-directional effect, level of earthquake shaking, varying incidence angle, have been determined. Three recorded ground motions, representative of historical earthquakes along with near-field, far-field and forward directivity effects, have been considered in the study. The efficacy of the bearings with bidirectional effect considering interaction behavior of bearing and pier has also been investigated. Modeling and analysis of the bridge have been done by finite element approach. Sensitivity studies of the bridge response with respect to design parameters of the bearings for the considered ground motions have been performed. The importance of the nonlinearity of HDR bearings along with crucial design parameters has been identified. It has been observed that the HDR bearings performed well in different variations of ground motions, especially for controlling torsional moment. However, the deck displacement has been found to be increased significantly in case of Turkey ground motions, considering forward directivity effect, which needs to be paid more attention from designer point of view.

• Steel and Composite Structures
• /
• 제49권6호
• /
• pp.701-711
• /
• 2023

In order to fully reflect variation characteristics of composite concrete dam health state, the monitoring data is applied to diagnose composite concrete dam health state. Composite concrete dam lesion development to wreckage is a precursor, and its health status can be judged. The monitoring data are generally non-linear and unsteady time series, which contain chaotic information that cannot be characterized. Thus, it could generate huge influence for the construction of monitoring models and the formulation of corresponding health diagnostic indicators. This multi-scale diagnosis process is from point to whole. Chaotic characteristics are often contained in the monitoring data. If chaotic characteristics could be extracted for reflecting concrete dam health state and the corresponding diagnostic indicators will be formulated, the theory and method of diagnosing concrete dam health state can be huge improved. Therefore, the chaotic characteristics of monitoring data are considered. And, the extracting method of the chaotic components is studied from monitoring data based on fuzzy dynamic cross-correlation factor method. Finally, a method is proposed for formulating composite concrete dam health state indicators. This method can effectively distinguish chaotic systems from deterministic systems and reflect the health state of concrete dam in service.

• Computers and Concrete
• /
• 제33권5호
• /
• pp.545-557
• /
• 2024

A real-case incident occurred where a 9-meter-high segment of a pre-fabricated concrete separation wall unexpectedly collapsed. This collapse was triggered by improperly depositing excavated soil against the wall's back, a condition for which the wall segments were not designed to withstand lateral earth pressure, leading to a flexural failure. The event's analysis, integrating technical data and observational insights, revealed that internal forces at the time of failure significantly exceeded the wall's capacity per standard design. The Lattice Discrete Particle Model (LDPM) further replicates the collapse mechanism. Our approach involved defining various parameter sets to replicate the concrete's mechanical response, consistent with the tested compressive strength. Subsequent stages included calibrating these parameters across different scales and conducting full-scale simulations. These simulations carried out with various parameter sets, were thoroughly analyzed to identify the most representative failure mechanism. We developed an equation from this analysis that quickly correlates the parameters to the wall's load-carry capacity, aligned with the simulation. Additionally, our study examined the wall's post-peak behavior, extending up to the point of collapse. This aspect of the analysis was essential for preventing failure, providing crucial time for intervention, and potentially averting a disaster. However, the reinforced concrete residual state is far from being fully understood. While it's impractical for engineers to depend on the residual state of structural elements during the design phase, comprehending this state is essential for effective response and mitigation strategies after initial failure occurs.