• 한국산업융합학회 논문집
• /
• 제20권5호
• /
• pp.431-439
• /
• 2017

Since the power transmission line(PTL) passes through the high mountain and heavy snowfall region, it is necessary to keep the stability of the PTL. In this study, PTL is modeled as a mass-spring-damper system by using RecurDyn. The lumped mass model is verified by calculated from the simulation comparing the deflection analysis according to the sag and tension. In order to analyze the dynamic behavior of PTL, a damping coefficient for a multi-body model is derived by using the free vibration test and Rayleigh damping theory. Sleet jump simulation according to the region is performed. The maximum jump height, icing sag and amount of jump are confirmed. Also, the amount of jump and the reaction force at the supporting point according to the tension and load of ice are analyzed, respectively. As a result, it is noted that the amount of jump and reaction force are influenced more by the load of ice than by the tension of PTL.

• 한국의상디자인학회지
• /
• 제13권3호
• /
• pp.69-80
• /
• 2011

The purpose of this study was to clothing behavior according to the self-esteem, body cathexis in multicultural familie adolescents. The data was collected by using questionnaire survey based on pre-tests, and main survey conducted in Seoul, Gyeonggi province and Chungcheong province. The 236 participants came from 135 multicultural families and 101 Korean Self-esteem, body cathexis, clothing behavior were examined through 5-point likert scale. 3 factors including clothing interest, social approval and clothing conformity were used as clothing behavior. The analysis of the collected data was conducted by using SPSS 18.0. The results of this study is as follows: First, multi-cultural family adolescent showed higher self-esteem, body cathexis, than Korean family adolescent. Second, self-esteem were positively correlated, with body cathexis in both multi-cultural family and Korean family adolescent. Third, in multi-cultural family adolescent, body cathexis were positively correlated with clothing interest, social approval and clothing conformity. In Korean family adolescent, body cathexis were positively correlated with social approval and body cathexis were negatively correlated with clothing conformity.

• 설비공학논문집
• /
• 제16권3호
• /
• pp.265-272
• /
• 2004

Based on the T-method, a new scheme for predicting air flow rate distribution in a bathroom exhaust system is developed. Introduction of individual duct route enables us to disintegrate a complicated multi-fan ductwork into a set of simultaneous single-fan subsystems. The scheme is validated via the analysis of a well-posed test problem, showing physical consistency. In order to demonstrate the utility and capability of our method, the bathroom ventilation system in a 20-story residential building is selected as an example. Under the typical design condition, the air flow rate of each exhaust fan at the balancing point is successfully predicted, and such information can lead to an engineering estimation for the overall system performance. While some deficiencies in ventilation are found at bathrooms at lower floors with 6mmAq-rated exhaust fans, they disappear over the whole building by using fans of enhanced static pressures, 7 and 8mmAq. Finally the present scheme seems to be useful for practical design of multi-branched, multi-fan ventilation systems.

• 마이크로전자및패키징학회지
• /
• 제21권4호
• /
• pp.33-39
• /
• 2014

To establish the reliability of a packaging structures, adhesion testing of key interfaces is a critical task. Due to the material mismatch, the interface may be prone to delamination failure due to conditions during the manufacturing of the product or just from the day-to-day use. To assess the reliability of the interface adhesion strength testing can be performed during the design phase of the product. One test method of interest is the four-point bending (4PB) adhesion strength test method. This test method has been implemented in a variety of situations to evaluate the adhesion strength of interfaces in bimaterial structures to the interfaces within thin film multilayer stacks. This article presents a review of the 4PB adhesion strength testing method and key implementations of the technique in regards to semiconductor packaging.

• 대한기계학회논문집
• /
• 제19권2호
• /
• pp.433-442
• /
• 1995

For the line search of a multi-variable optimization, an efficient algorithm is presented. The algorithm sequentially employs several polynomial approximations such as 2-point quadratic interpolation, 3-point cubic interpolation/extrapolation and 4-point cubic interpolation/extrapolation. The order of polynomial function is automatically increased for improving the accuracy of approximation. The method of approximation (interpolation or extrapolation) is automatically switched by checking the slope information of the sample points. Also, for selecting the initial step length along the descent vector, a new approach is presented. The performance of the proposed method is examined by solving typical test problems such as mathematical problems, mechanical design problems and dynamic response problems.

• ETRI Journal
• /
• 제29권1호
• /
• pp.79-88
• /
• 2007

This paper proposes a novel concept of adjusting the hardware size in a multi-carrier code division multiple access (MC-CDMA) receiver in real time as per the channel parameters such as delay spread, signal-to-noise ratio, transmission rate, and Doppler frequency. The fast Fourier transform (FFT) or inverse FFT (IFFT) size in orthogonal frequency division multiplexing (OFDM)/MC-CDMA transceivers varies from 1024 points to 16 points. Two low-power reconfigurable radix-4 256-point FFT processor architectures are proposed that can also be dynamically configured as 64-point and 16-point as per the channel parameters to prove the concept. By tailoring the clock of the higher FFT stages for longer FFTs and switching to shorter FFTs from longer FFTs, significant power saving is achieved. In addition, two 256 sub-carrier MC-CDMA receiver architectures are proposed which can also be configured for 64 sub-carriers in real time to prove the feasibility of the concept over the whole receiver.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 통신소사이어티 추계학술대회논문집
• /
• pp.55-59
• /
• 2003

In this paper, we estimate the performance requirements of general-purpose DSP for Carrier Recovery of OFDM DVB-T receiver. Firstly, we transported the designed fixed-point OFDM DVB-T model to a floating-point software model written in C. Then, we measured the number of instruction cycles required for operation of Carrier Recovery in time. We use SignalMaster$\^$TM/ DSP platform of LYRtech Inc. as a environment of estimation, and Simulink$\^$TM/ as a graphical interface, Code Composer StudioTM of TI as profiler and compiler, and SPW$\^$TM/ for presenting functional reliability and comparing the performance distortion with fixed-point model. As a result, we show the required number of DSPs in our DSP-based system, and introduce the need of Multi-DSP-based system.

• Journal of Electrical Engineering and Technology
• /
• 제2권1호
• /
• pp.123-128
• /
• 2007

SPWPM traditional software development is surveyed and essential problems are investigated on the basis of system wireless link considerations. This paper presents the current state software planning tools for wireless LAN link optimization. The software directory is based on combination of MatLab and MapInfo software and measurement which gives the best grouping parameters to build up the software development. Among the requirements assumed, the WLAN site selections must be Line-of-sight (LOS) or near line of sight (NLOS) field strength prediction for either point to point or point to multi points. The results obtainable the out put of the program include two-dimensional (2D) and three dimensional (3D) plots for creating the link; design parameters through GUI representing the height and location for each antenna is depending on K-factor of the area and transmit antenna location.

• 지적과 국토정보
• /
• 제50권2호
• /
• pp.69-79
• /
• 2020

최근 IoT 기술을 기반으로 도시의 여러 문제점을 정보화하여 해결하는 스마트 시티가 각광받고 있다. 특히, 시공 및 유지보수의 원활한 관리를 위한 BIM 적용 사례가 증가하며 융합기술을 통해 공간정보를 3D 데이터화하여 안전진단에 활용하고 있다. 본 연구의 목적은 UAV 및 LiDAR 장비 중 지상 레이저 스캐너와 핸드헬드 LiDAR SLAM을 활용하여 복층 건물의 포인트 클라우드를 생성 및 조합, 각 기술의 폐색영역 및 단점을 보완하고 형상재현 및 정확도를 관측하여 실내외 역설계의 효용성을 검토하는 것이다. 검토결과, 3가지 기술을 사용하여 복층 건물의 실내외 포인트 클라우드를 생성·조합하여 데이터의 좌표 정확도가 향상됨을 확인하였다. 특히, 각 기술의 단점을 보완, 건물의 형상재현 완성도를 높이고 폐색영역 및 경계면 구분이 명확하게 나타나며 역설계의 효용성을 입증하였다.

• 한국정보통신학회논문지
• /
• 제11권9호
• /
• pp.1709-1716
• /
• 2007

본 논문에서는 고속 동작을 위한 다중 SHA(sample and hold amplifier) 구조의 파이프라인 A/D 변환기(analog-to-digital converter)를 제안하였다. 제안된 구조는 변환 속도를 높이기 위해, 동일한 SHA를 병렬로 하는 다중 SHA를 구성하였다. 이를 비중첩 클럭(nonoverlapping clock)에서 동작하도록 하여 셀을 구성하는 SHA의 수와 비례한 빠른 샘플링 속도를 얻을 수 있도록 하였다. 제안된 구조를 적용하여 VDSL(very high-speed digital subscriber line) 모뎀의 아날로그 front-end단의 요구 사항을 만족하는 파이프라인 A/D 변환기를 설계하였다. 설계된 A/D 변환기의 DNL(differential nonlinearity)과 INL(integral nonlinearity)은 각각 $0.52LSB{\sim}-0.50LSB,\;0.80LSB{\sim}-0.76LSB$의 특성을 나타내어 설계 사양을 만족함을 확인하였다. 또한 2048 point 대한 FFT를 수행한 결과 SNR이 약 66dB로 10.7비트의 해상도가 얻어짐을 확인하였으며, 전력 소모는 24.32mW로 측정되었다.