• 경영과학
• /
• 제32권2호
• /
• pp.111-124
• /
• 2015

In the management literature, it has been widely accepted among both researchers and practitioners that the level of team creativity is significantly related to the organizational performance. Besides, researchers posited with confidence that team diversity and task difficulty would affect team creativity through team members' activities of exploration and exploitation. However, empirical approaches to proving this belief suffered from lack of real data and proper methods as well. To tackle the research void like this, we propose a multi-agent simulation (MAS) mechanism. By adopting a set of parameters which validity were proven in the related literature, we conducted a series of experiments in the environment of the MAS platform named NetLogo. There sults suggest that managers can differentiate team diversity strategies according to task difficulty. In the case of a difficult task, managers need to increase team diversity so that their teams can maximize team creativity through rigorous exploration and exploitation. It is desirable to maintain an average level of team diversity when performing an easy task.

• 한국통신학회논문지
• /
• 제23권5호
• /
• pp.1291-1298
• /
• 1998

In this paper, a simple algorithm for detection of timing error of a synchronous, band-limited, multi-level data stream is proposed. The proposed algorithm can be applied to multi-level PAM, M-ary PSK, or M-ary QAM. The proposed algorithm for M-ary PSK requires only two samples per symbol for its operation, and it is based on the concept of transition logic table and transition level table. In orer to prove the steady-state operation of the proposed algorithm, its performance is evaluated and compared to BECM by Monte Carlo simulation method under Gaussian noise and fading noise channel environments. The comparison results confirm that the perforance of proposed algorithm is superior to that of BECM in jitter characteristics.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 통신소사이어티 추계학술대회논문집
• /
• pp.297-301
• /
• 2003

The binary clipping PW/CDMA system is considered. This system can be constructed with effective cost. leading to reduce the influence of the non-linear amplifier because of converting multi-level signals into constant envelope signals. In addition, the clipping method which is to clip out signal amplitude at some level when multi-level signals are converted into constant envelope signals is used. The multi-level signals are clipped at 1 and -1 to limit the extension of bandwidth and to maintain the bandwidth after clipping. In this paper, the performance of the binary clipping PW/CDMA system with the non-linear amplifier analyzed by simulation over AWGN and flat fading channels respectively. The binary clipping PW/CDMA system with the non-linear amplifier is 2.2dB and 0.9dB better than conventional DS/CDMA system over the flat fading channels when the number of users are 9 and 17 respectively.

• Journal of Electrical Engineering and Technology
• /
• 제13권1호
• /
• pp.333-344
• /
• 2018

This proposed paper aims for the high efficiency contactless power transfer in household dc power distribution. A 300 W five-level diode clamped multi-level converter with 300 Vdc input dc link bus is employed for the power transferring task and the output voltage range is controlled at 48 Vdc. The inner and outer solenoid coils are used for inductive power transfer (IPT) transformer with the 200 kHz switching frequency for designed power density. Therefore, to achieve the converter efficiency above 95%, the LLC series resonant with fundamental harmonic analysis (FHA) and the calculated switching angles are used as an optimized tool for designing the system resonant tank. The validations of this approached topology are illustrated in both MATLAB/Simulink simulation and implementation.

• Journal of Power Electronics
• /
• 제14권3호
• /
• pp.499-506
• /
• 2014

This paper proposes a 3 kW single-phase bi-directional multi-level converter for energy storage applications. The proposed topology is based on the H-bridge structure with four switches connected to the DC-link. A simple phase opposition disposition PWM method that requires only one carrier signal is also suggested. The switching sequence to balance the capacitor voltage is considered. The topology can be extended to a nine-level converter or a three-phase system. The operating principle of the proposed converter is verified through a simulation and an experiment.

• 한국자동차공학회논문집
• /
• 제8권2호
• /
• pp.138-150
• /
• 2000

This study is concerned with computerized multi-level substructuring methods and stress analysis of coil springs. The purpose of substructuring methods is to reduce computing time and capacity of computer memory by multiple level reduction of the degrees of freedom in large size problems which are modeled by three dimensional continuum finite elements. In this paper, a super element has been developed for stress analysis of coil springs. The spring super element developed has been examined with tension and torsion simulation of cylindrical bars for demonstrating its validity. The result shows that the super element enhances the computing efficiency while it does not affect the accuracy of the results and it is ready for application to the coil spring analysis.

• 전기학회논문지
• /
• 제56권6호
• /
• pp.1071-1079
• /
• 2007

In this paper, a novel space vector control method for isolated multi-level inverter using 3-phase low frequency transformers is proposed. This method is based on the simplification of the space-vector diagram of a five-level inverter using calculated table into fully programming method. The execution time of the proposed method is about same as that of the method using calculated table. Also, the proposed method is easily applied to other case level inverter. We applied this method into the 3-phase IHCML inverter using common arm. It makes possible to use a single DC power source due to employing low frequency transformers. In this inverter, the number of transformers could be reduced compare with an exiting 3-phase multi-level inverter using single phase transformer. In addition, this method generates very low harmonic distortion operation with nearly fundamental switching frequency. Finally, We tested multi-level inverter to clarify electric circuit and reasonableness through Matlab simulation and experiment by using prototype inverter.

• Journal of Communications and Networks
• /
• 제12권5호
• /
• pp.466-474
• /
• 2010

Various types of cooperative relaying (CR) schemes exhibit different levels of throughput and outage performance because of their inherent trade-off between diversity gain and opportunity cost; in other words, the overhead that is associated with cooperation. This article attempts to answer whether cooperative communication is beneficial or not from the system-level viewpoint and furthermore, if it is, how its average throughput can be maximized while maintaining the target outage rate. In order to improve throughput at the required outage performance, we propose a unified selection criterion to deal with different levels of combining gain and opportunity cost associated with each scheme, which allows for the employment of different CR schemes for various positions of the mobile station. Our system-level simulation results for an IEEE 802.16j multi-hop relay confirm the varying levels of trade-offs among different CR schemes and furthermore, show that CR will be a useful means of maximizing the average throughput for a multi-hop relay system as long as each type of the cooperating scheme is carefully selected, depending on the position of the mobile stations.

• 한국지반공학회논문집
• /
• 제34권6호
• /
• pp.25-36
• /
• 2018

지반의 액상화는 지진 피해의 대표적인 형태 중 하나이다. 이는 막대한 인적 경제적 피해를 줄 수 있는 현상으로, 지반구조물의 설계 전 필수적으로 검토해야 하는 대상이다. 본 연구에서는 하천 제방을 대상으로 임의의 지진 규모와 수위에서 액상화에 대한 실용적인 복합재해 취약도 곡면 작성법을 제시하였다. 지반의 파괴 정도를 나타내는 액상화 가능 지수(LPI)로 제방의 액상화에 대한 한계상태를 정의하였다. 지반 물성치의 불확실성을 고려하기 위해 Monte Carlo Simulation 기반의 확률론적 해석을 수행하였고, 해석 결과를 바탕으로 임의 수준의 수위와 지진 규모에 대하여 액상화에 의한 파괴확률을 나타내는 3차원의 취약도 곡면을 작성하였다. 작성된 복합재해 취약도 곡면은 홍수 및 지진에 대한 제방의 안전성 평가와 취약지역에 대한 위험도 평가에 사용될 수 있다.

• Communications for Statistical Applications and Methods
• /
• 제16권2호
• /
• pp.217-228
• /
• 2009

계층 전이가 가능한 다계층 대기행렬에 대한 빠른 시뮬레이션 방법을 제시하고 이를 이용하여 총 고객의 수가 적정 수준을 초과하는 과부하 발생 확률과 과부하 발생시 각 계층별 평균 고객의 수를 추정한다. 또한 이들 값들이 시스템의 총 로드나 계층별 로드에 따라 어떤 차이를 보이는지도 빠른 시뮬레이션을 통해 서로 비교한다.