• 한국컴퓨터정보학회논문지
• /
• 제14권7호
• /
• pp.97-103
• /
• 2009

본 논문의 무선 센서네트워크에서 사용할 수 있는 효율적인 라우팅 방법인 MP-DD (MultiPath-Direct Diffusion) 알고리즘을 제안한다. 기존의 DD(Directed Diffusion)에서는 하나의 경로만을 강화하여 사용하는 것과 달리 제안한 알고리즘은 다중 경로를 강화하면서, 해당 경로에 높여 있는 센서 노드의 남은 에너지 등급을 고려하여 에너지 레벨이 높은 경로에 따라 가중치를 부여하고, 몇 개의 다중경로를 이용하여 사용함으로써 에너지 소모를 감소시키고 동시에 네트워크에 전체적으로 에너지를 골고루 사용하게 할 수 있다. 시뮬레이션 결과에서는 이러한 센서 네트워크를 위한 단순한 라우팅 방법의 가능성을 증명하였다.

• 멤브레인
• /
• 제8권1호
• /
• pp.22-28
• /
• 1998

혈중 글루코우즈의 농도를 측정하기 위한 진단막의 제조를 위해 다층 젤라틴 필름이 사용되었다. 혈당치를 얻기위해 glucose dehydrogenase와 diaphorase를 이용하여 다층 젤라틴 필름을 통과하는 글루코우즈의 확산속도를 측정하였다. 글루코우즈의 최대 확산속도에 미치는 코팅의 간격거리, 효소의 양, 필름의 두께, 그리고 외부 온도의 영향에 대해 조사하였다.

• 대한기계학회논문집B
• /
• 제28권11호
• /
• pp.1339-1347
• /
• 2004

Development of the low NOx heating boiler was strongly asked due to severe air pollution and the large number of boilers in korea. Compactness of the commercial boiler was also important because of low manufacturing cost and easy installation. In this study. newly developed compact low NOx burner, using turbulent gas diffusion combustion with multi-staged air supplies and multiple fuel nozzles, was investigated. Comparison study of the new burner was performed between experimental results and computational analysis. Commercial computational fluid dynamic(CFD) program named CFX-5.6 was used for numerical analysis of the low NOx burner inside the test combustor. Comparisons of experiment data and numerical result were performed under various equivalence ratio and fuel flow rate.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2014년도 추계학술발표대회
• /
• pp.1183-1186
• /
• 2014

Our research is different form traditional to have some large LED screen grouping together to constitute multi-vision technique. In this paper, we purpose a method of using k-path diffusion method to build connect between the devices and find an optimal data transmission path. In second half of this paper, through practical application, we using this technique transmitting data successfully and achieving a simple Multi-vision effect. This technique possess smart devices and Wifi P2P's features, these features improve system's dynamic and decentralized processing ability make our technique has high scalability.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.934-941
• /
• 2000

We measured the electron transport coefficients, the electron drift velocity W and the longitudinal diffusion coefficient $D_{L}$ in the 0.526% and 5.05% $C_{3}F_{8}$-Ar mixtures over the E/N range from 0.01 Td to 100 Td by the double shutter drift tube, and compared the measured results by Hunter et al. with those. We determined the inelastic collision cross sections for the $C_{3}F_{8}$ molecule by the comparison of the present measurements and the calculation of electron transport coefficients in the $C_{3}F_{8}$-Ar mixtures by using a multi-term Boltzmann equation analysis.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제6권1호
• /
• pp.16-21
• /
• 2006

A simple doping method to fabricate a very thin channel body of the p-type FinFETs with a 20 nm gate length by solid-phase-diffusion (SPD) process was developed. Using the poly-boron-films (PBF) as a novel diffusion source of boron and the rapid thermal annealing (RTA), the p-type sourcedrain extensions of the FinFET devices with a threedimensional structure were doped. The junction properties of boron doped regions were investigated by using the $p^+-n$ junction diodes which showed excellent electrical characteristics. Single channel and multi-channel p-type FinFET devices with a gate length of 20-100 nm was fabricated by boron diffusion process using PBF and revealed superior device scalability.

• 한국경영과학회지
• /
• 제29권1호
• /
• pp.87-99
• /
• 2004

In this paper, we have developed a technology-service relationship model which describes the diffusion process of a group of services and relevant technologies, and have applied the developed model to the prediction of the number of subscribers to the next generation mobile service. The technology-service relationship model developed in this paper incorporates the developing process of relevant technologies, a supply-side factor, into the diffusion process of specific services, while many diffusion models and multi-generation diffusion models in previous researches are mainly reflect the demand-side factors. So, the proposed model could effectively applied to the telecommunication services where the developing of the relevant technologies are very essential to the service Penetration. In our application, the Proposed model provides a competitive substitution between the next generation mobile service and the traditional mobile service.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
• /
• pp.411-412
• /
• 2014

• 전기화학회지
• /
• 제15권3호
• /
• pp.165-171
• /
• 2012

본 연구에서는 전기화학계에서 중요한 다중전자의 이동이 수반되는 전극 반응에 대하여 순환전위법의 특성곡선을 모델링하여, MATLAB 프로그램으로 구현하였다. 전극주변의 전기화학 물질전달계에 대하여 반무한 확산모델의 경계조건을 설정하였고, Fick의 농도방정식은 유한차분법으로 전개하여 수치해를 구하였고, Butler-Volmer 식으로부터 계산된 농도값을 전류의 값으로 전환하였다. 본 연구에서 구현된 수치해는 기존의 실험치들과 합리적으로 설명하고 있었으며, 이를 근거로 다중전자 전기화학 반응계에서 반응메카니즘에 대한 전극반응속도 상수와 CV 주사속도 영향을 효과적으로 해석할 수 있었다.

• 대한기계학회논문집B
• /
• 제28권9호
• /
• pp.1081-1092
• /
• 2004

The synthesis of Ni-catalyzed multi-walled carbon nanotubes and nanofibers on a catalytic metal substrate, using an ethylene fueled inverse diffusion flame as a heat source, was investigated. When the gas temperature was varied from 1,400K to 900K, approximately, carbon nanotubes with diameters of 20∼60nm were formed on the substrate. In the regions where the gas temperature was higher than 1,400K or lower than 900K, iron nanorods or carbon nanofibers were synthesized, respectively. Based on the quantitative analyses of large amount of SEM and TEM images, the nanotubes formed closer to the flame had a tendency of having larger diameters. HR-TEM images and Raman spectra revealed that carbon nanotubes synthesized had multi-walled structures with some defective graphite layers at the wall. Based on the graphite mode of the Raman spectra, it was believed that the optimal synthesis could be obtained as the substrate was positioned at between 5.5mm and 5.0mm, from the flame axis.