• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.3
• /
• pp.685-690
• /
• 2013

This paper has proposed a multi-channel and wide gain-range baseband circuit blocks for the IEEE 802.15.4g MR-OFDM SUN systems. The proposed baseband circuit blocks consist of two negative-feedback VGAs, an active-RC 5th-order chebyshev low-pass-filter, and a DC-offset cancellation circuit. The proposed baseband circuit blocks provide 1 dB cut-off frequencies of 100 kHz, 200 kHz, 400 kHz, and 600 kHz respectively, and achieve a wide gain-range of +7 dB~+84 dB with 1 dB step. In addition, a DC-offset cancellation circuit has been adopted to mitigate DC-offset problems in direct-conversion receiver. Simulation results show a maximum input differential voltage of $1.5V_{pp}$ and noise figure of 42 dB and 37.6 dB at 5 kHz and 500 kHz, respectively. The proposed I-and Q-path baseband circuits have been implemented in $0.18-{\mu}m$ CMOS technology and consume 17 mW from a 1.8 V supply voltage.

• Applied Biological Chemistry
• /
• v.47 no.3
• /
• pp.300-306
• /
• 2004

Eight cation or anion-responsive polymer membranes were prepared by a casting procedure employing polyvinyl chloride, Bis (2-ethylhexyl)sebacate and each electroactive material in the ratio of 66 : 33 : 1. The resulting membranes were separately installed onto the sensitive area of the ionic electrodes to produce an 8-channel taste sensor array. The taste sensors of the array were connected to a high-input impedance amplifier and the amplified sensor signals were interfaced to a PC via an A/D converter. The taste evaluation system was applied to a discriminant analysis on six groups of marketed beverages like sikhye, sujunggwa, tangerine juice, ume juice, ionic drink and green tea. When the signal data from the sensor array were analyzed by principal component analysis after normalization, the 1st, 2nd and 3rd principal component explained most of the total data variance. The six groups of the analyzed beverages were discriminated well in the three dimensional principal component space. The half of the five groups of the analyzed beverages was also discriminated in the two dimensional principal component plane.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.1
• /
• pp.73-80
• /
• 2018

In motorway traffic flow control, the conventional way based on real-time response has been changed into advanced way based on proactive response. Future traffic conditions over multiple time intervals are crucial input data for advanced motorway traffic flow control. It is necessary to overcome the uncertainty of the future state in order for forecasting multiple-period traffic volumes, as the number of uncertainty concurrently increase when the forecasting horizon expands. In this vein, multi-interval forecasting of traffic volumes requires a viable approach to conquer future uncertainties successfully. In this paper, a forecasting model is proposed which effectively addresses the uncertainties of future state based on the behaviors of temporal evolution of traffic volume states that intrinsically exits in the big past data. The model selects the past states from the big past data based on the state evolution of current traffic volumes, and then the selected past states are employed for estimating future states. The model was also designed to be suitable for data management systems in practice. Test results demonstrated that the model can effectively overcome the uncertainties over multiple time periods and can generate very reliable predictions in term of prediction accuracy. Hence, it is indicated that the model can be mounted and utilized on advanced data management systems.

• Journal of the Economic Geographical Society of Korea
• /
• v.15 no.1
• /
• pp.77-94
• /
• 2012

The purpose of this study is to analyze the process of vertical fragmentation of regional industries in Korea using Revealed Comparative Advantage index (RCA) and Average Propagation Length (APL). First of all, the competitiveness in regional export and substitution of regional imports were strong in the Electricity, Gas, and Water supply sector in Gyeongnam, and consumer-oriented Manufacturing sector in Incheon, Gyeongnam, and Gwangju. The high values of the APL were also found in the regions with common similarity with respect to the industrial structure and the sectors with indirect effects. In addition, the industrial sectors with high quality of infrastructure, and endowed services tended to be located in the beginning of the production chain. FInally, since manufacturing and service sectors in Seoul has higher APL, they could lead the growth of other related industries as key sectors, in the production fragmentation.

• Journal of Digital Convergence
• /
• v.16 no.1
• /
• pp.287-292
• /
• 2018

The digital multimedia environment, centered on Information and Communications Technologies (ICT) technology, has transformed our imagination into a diverse experience. The flexible display, which was born as a means of human-machine communication required in a highly information-oriented society, It is creating a new market by linking with Internet of things. ecause the interface of a flexible display can provide a physical form as a result of input or output, user-centered interface design is paramount. Therefore, the researchers of this paper have studied the physical deformation and characteristics of flexible display by user manipulation through literature and case studies. Therefore, the authors of this paper studied the physical deformations and characteristics of flexible displays by user manipulation through literature and case studies. This research suggests the following guidelines for a flexible display interface design for the user experience. First, it must be designed to provide the functionality that users need in a variety of display environments. Second, in using the interface, external factors should be removed from the viewing angle of multi-users. Third, all possible user actions should be considered on flexible displays other than touch and contact. Fourth, flexible design of flexible display requires changing interface design for user experience.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.5
• /
• pp.497-504
• /
• 2020

Constructing speaker embeddings in speaker verification is an important issue. In general, a self-attention mechanism has been applied for speaker embedding encoding. Previous studies focused on training the self-attention in a high-level layer, such as the last pooling layer. In this case, the effect of low-level layers is not well represented in the speaker embedding encoding. In this study, we propose Masked Cross Self-Attentive Encoding (MCSAE) using ResNet. It focuses on training the features of both high-level and low-level layers. Based on multi-layer aggregation, the output features of each residual layer are used for the MCSAE. In the MCSAE, the interdependence of each input features is trained by cross self-attention module. A random masking regularization module is also applied to prevent overfitting problem. The MCSAE enhances the weight of frames representing the speaker information. Then, the output features are concatenated and encoded in the speaker embedding. Therefore, a more informative speaker embedding is encoded by using the MCSAE. The experimental results showed an equal error rate of 2.63 % using the VoxCeleb1 evaluation dataset. It improved performance compared with the previous self-attentive encoding and state-of-the-art methods.

• Journal of the Korean Society for Railway
• /
• v.19 no.5
• /
• pp.617-628
• /
• 2016

This paper proposes the structure of a smart transformer to improve the performance of the 60Hz main power transformer for rolling stock. The proposed smart transformer is a kind of solid state transformer that consists of semiconductor switching devices and high frequency transformers. This smart transformer would have smaller size than the conventional 60Hz main transformer for rolling stock, making it possible to operate AC electrified track efficiently by power factor control. The proposed structure employs a cascade H-Bridge converter to interface with the high voltage AC single phase grid as the rectifier part. Each H-Bridge converter in the rectifier part is connected by a Dual-Active-Bridge (DAB) converter to generate an isolated low voltage DC output source of the system. Because the AC voltage in the train system is a kind of medium voltage, the number of the modules would be several tens. To control the entire smart transformer, the inner DC voltage of the modules, the AC input current, and the output DC voltage must be controlled instantaneously. In this paper, a control algorithm to operate the proposed structure is suggested and confirmed through computer simulation.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.12
• /
• pp.90-95
• /
• 2014

This paper presents a VHF/UHF-band variable gain low noise amplifier for multi-standard mobile TV tuners. A proposed VHF-band variable gain amplifier is composed of a resistive shunt-feedback low noise amplifier to remove external matching components, a single-to-differential amplifier with input PMOS transcoductors to improve low frequency noise performance, a variable shunt-feedback resistor and an attenuator to control variable gain range. A proposed UHF-band variable gain amplifier consists of a narrowband low noise amplifier with capacitive tuning to improve noise performance and interference rejection performance, a single-to-differential with gm gain control and an attenuator to adjust gain control range. The proposed VHF-band and UHF-band variable gain amplifier were designed in a $0.18{\mu}m$ RF CMOS technology and draws 22 mA and 17 mA from a 1.8 V supply voltage, respectively. The designed VHF-band and UHF-band variable gain amplifier show a voltage gain of 27 dB and 27 dB, a noise figure of 1.6-1.7 dB and 1.3-1.7 dB, OIP3 of 13.5 dBm and 16 dBm, respectively.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.1
• /
• pp.224-234
• /
• 2000

In this paper, we propose a new CPLD technology mapping algorithm for sequential circuit under time constraints. The algorithm detects feedbacks of sequential circuit, separate each feedback variables into immediate input variable, and represent combinational part into DAG. Also, among the nodes of the DAG, the nodes that the number of outdegree is more than or equal to 2 is not separated, but replicated from the DAG, and reconstructed to fanout-free-tree. To use this construction method is for reason that area is less consumed than the TEMPLA algorithm to implement circuits, and process time is improved rather than TMCPLD within given time constraint. Using time constraint and delay of device the number of partitionable multi-level is defined, the number of OR terms that the initial costs of each nodes is set to and total costs that the costs is set to after merging nodes is calculated, and the nodes that the number of OR terms of CLBs that construct CPLD is excessed is partitioned and is reconstructed as subgraphs. The nodes in the partitioned subgraphs is merged through collapsing, and the collapsed equations is performed by bin packing so that if fit to the number of OR terms in the CLBs of a given device. In the results of experiments to MCNC circuits for logic synthesis benchmark, we can shows that proposed technology mapping algorithm reduces the number of CLBs bu 15.58% rather than the TEMPLA, and reduces process time rather than the TMCPLD.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5C
• /
• pp.527-539
• /
• 2009

In this paper, we propose an asynchonous ICI (Inter-Cell Interference) mitigation techniques for 3GPP LTE MIMO-OFDMA down-link receiver. An increasing in symbol timing misalignments may occur relative to sychronous network as the result of BS (Base Station) timing differences. Such symbol synchronization errors that exceed the guard interval or the cyclic prefix duration may result in MAI (Multiple Access Interference) for other carriers. In particular, at the cell boundary, this MAI becomes a critical factor, leading to degraded channel throughput and severe asynchronous ICI. Hence, many researchers have investigated the interference mitigation method in the presence of asynchronous ICI and it appears that the knowledge of the SCM (Spatial Covariance Matrix) of the asynchronous ICI plus background noise is an important issue. Generally, it is assumed that the SCM estimated by using training symbols. However, it is difficult to measure the interference statistics for a long time and training symbol is also not appropriate for MIMO-OFDMA system such as LTE. Therefore, a noise reduction method is required to improve the estimation accuracy. Although the conventional time-domain low-pass type weighting method can be effective for noise reduction, it causes significant estimation error due to the spectral leakage in practical OFDM system. Therefore, we propose a time-domain sinc type weighing method which can not only reduce the noise effectively minimizing estimation error caused by the spectral leakage but also implement frequency-domain moving average filter easily. By using computer simulation, we show that the proposed method can provide up to 3dB SIR gain compared with the conventional method.