Abstract
Eight cation or anion-responsive polymer membranes were prepared by a casting procedure employing polyvinyl chloride, Bis (2-ethylhexyl)sebacate and each electroactive material in the ratio of 66 : 33 : 1. The resulting membranes were separately installed onto the sensitive area of the ionic electrodes to produce an 8-channel taste sensor array. The taste sensors of the array were connected to a high-input impedance amplifier and the amplified sensor signals were interfaced to a PC via an A/D converter. The taste evaluation system was applied to a discriminant analysis on six groups of marketed beverages like sikhye, sujunggwa, tangerine juice, ume juice, ionic drink and green tea. When the signal data from the sensor array were analyzed by principal component analysis after normalization, the 1st, 2nd and 3rd principal component explained most of the total data variance. The six groups of the analyzed beverages were discriminated well in the three dimensional principal component space. The half of the five groups of the analyzed beverages was also discriminated in the two dimensional principal component plane.
양이온 및 음이온 반응성의 고분자막 8종을 casting 법에 의하여 제조한 후 이온전극에 장착하여 다채널 맛 평가시스템의 비선택성 센서 어레이를 구성하였다. 맛 센서 어레이에 의한 전기화학계측은 전위법에 의하여 행하였으며, 이 때 센서 어레이를 구성하는 각각의 맛 센서로 측정한 전위간을 막 전위 증폭기를 거쳐 증폭한 후 다채널 A/D converter를 통하여 PC에 접속하였다. 식혜, 수정과, 감귤쥬스 등 6종 24점의 시판음료를 다채널 맛 평가시스템으로 분석한 후 각 센서의 계측신호에 대한 정규화를 행하고 주성분 분석을 행하였을 때 5종 음료군의 조합에서는 제1 주성분 및 제2 주성분의 합이 전체 데이터 변이의 $70.73{\sim}85.32%$를 설명하는 것으로 나타났으며 6종 음료군의 경우에는 제1 주성분 및 제2 주성분의 합과 제1 주성분, 제2 주성분 및 제3 주성분의 합이 전체데이터 변이의 81.46%와 89.56%를 각각 설명하는 것으로 나타났다. 3차원 공간상에 6종 음료군에 대한 계측결과를 맵핑하였을 때 이들의 구분이 가능하였으며, 5종 음료군의 조합에서는 2가지 경우에 있어 2차원 평면상에서 구분되었다.