• 한국정보처리학회논문지
• /
• 제6권11호
• /
• pp.3086-3096
• /
• 1999

To declare conformance of multi-protocol Implementation Under Test(IUT), every layer of the multi-protocol IUT should be tested. According to ISO9646, single-layer test method is applied to testing the highest layer of multi-protocol IUT and single-layer embedded test method is used for the layers by layer all the protocols in a multi-protocol IUT. This paper proposes a new method for testing a multi-protocol IUT. The proposed test method assumes that a multi-protocol IUT is under test and that the interfaces between the layers cannot be controlled or observed by the tester. We apply the proposed test method to TCP/IP and compare the application results with those of the existing test turns out that the proposed test method significantly reduces the number of test cases as well as the number of test events while providing the same test coverage. In addition, the proposed test method shows the capability to locate the layer that is source of failure in testing multi-protocol IUTs.

• 조명전기설비학회논문지
• /
• 제26권10호
• /
• pp.60-71
• /
• 2012

This paper proposes a new design and implementation of multi-protocol IED for networked control system of multi-induction motor in industrial fields. The experimental multi-induction motor based multi-protocol IED of Modbus/LonTalks/TCP/IP module is designed and fabricated. This article addresses issues in architecture of LonWorks/Ethernet sever, embedded processors architecture for converting Modbus protocol to LonTalks protocol, integrating preconfigured software, and Internet technologies. It is also verified that the multi-induction motor control and monitoring system using LonWorks/Ethernet server have available, interoperable, reliable performance characteristics from the experimental results, especially, the seamless integration of TCP/IP networks with control networks allows access to any control point from anywhere. Thus, the results provide available technical data for remote distributed motor control system of industrial field or building microgrid with LonWorks BAS.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권4호
• /
• pp.1437-1459
• /
• 2020

Wireless Sensor Networks (WSN) is a distributed Sensor network whose terminals are sensors that can sense and check the environment. Sensors are typically battery-powered and deployed in where the batteries are difficult to replace. Therefore, maximize the consumption of node energy and extend the network's life cycle are the problems that must to face. Low-energy adaptive clustering hierarchy (LEACH) protocol is an adaptive clustering topology algorithm, which can make the nodes in the network consume energy in a relatively balanced way and prolong the network lifetime. In this paper, the novel multi-objective LEACH protocol is proposed, in order to solve the proposed protocol, we design a multi-objective coupling algorithm based on bat algorithm (BA), glowworm swarm optimization algorithm (GSO) and bacterial foraging optimization algorithm (BFO). The advantages of BA, GSO and BFO are inherited in the multi-objective coupling algorithm (MBGF), which is tested on ZDT and SCH benchmarks, the results are shown the MBGF is superior. Then the multi-objective coupling algorithm is applied in the multi-objective LEACH protocol, experimental results show that the multi-objective LEACH protocol can greatly reduce the energy consumption of the node and prolong the network life cycle.

• 제어로봇시스템학회논문지
• /
• 제10권5호
• /
• pp.428-433
• /
• 2004

In this paper, we developed a multi-protocol controller based on SoC and embedded Linux and applied it to integrate with BAS in a unified TCP/IP socket communication. The multi-protocol controller integrates control networks of RS-485 and LonWorks devices to BAS. The system consists of three-tier architecture, such as a BAS, a multi-protocol converter, and control devices. By using UML, we modeled the system architecture. In order to show the feasibility of system architecture, it was applied to a small BAS system. The experimental results show that the multi-protocol controller using embedded Linux is flexible and effective way to develop a building control system.

• 제어로봇시스템학회논문지
• /
• 제10권4호
• /
• pp.334-340
• /
• 2004

In this paper, a Web-based management system for the building network is described. A multi-protocol converter based on SoC and embedded Linux is designed. The open source licensing, reliability, and broad hardware support are key reasons for use of embedded Linux in embedded industry. The multi-protocol converter integrates control network of RS-485 and LonWorks devices through TCP/IP protocol for a client with Java applet. The system consists of three-tier architecture, such as a client, a server that is performed on a multi-protocol converter, and control devices. The developed system includes the inverter motor control system with modbus protocol for the RS-485 network. The experiment results show that the multi-protocol converter using embedded Linux is a flexible and effective way to builda Web -based monitoring and control system.

• Journal of electromagnetic engineering and science
• /
• 제12권3호
• /
• pp.189-195
• /
• 2012

In this paper, we propose a novel protocol called a Multi-hop Diversity Transmission protocol in which the retransmission is realized by a relay that is Nearest to a current Source (MDTNS). We derive the mathematical expressions of the packet error rate (PER) and the average number of transmissions over Nakagami-m fading channels, and verify them by Monte Carlo simulations. The simulation results show that the MDTNS protocol improves the performance of the network in terms of PER when compared to the Multi-hop Diversity Transmission protocol in which the retransmission is done by a relay that is Nearest to Destination (MDTND) and to the conventional multi-hop transmission (CMT) protocol.

• 한국컴퓨터정보학회논문지
• /
• 제4권3호
• /
• pp.93-100
• /
• 1999

본 논문은 근거리 통신망 (LAN) 의 매체 엑세스 제어 방식 중 하나인 L-Expressnet 프로토콜이 본래의 Expressnet 프로토콜의 구조를 단순화시킨 반면에 채널 이용률을 떨어뜨리는 단점이 있어 이를 보완하고자 다중 패널 기법을 사용하여 한 사이클 동안 더 많은 데이터를 전송할 수 있는 다중채널 L-Expressnet 프로토콜을 제안하였다. 그리고 이 다중 채널 L-Expressnet 프로토콜을 채널이용률 관점에서 분석한 뒤 그 값을 기존의 프로토콜인 Expressnet 프로토콜, L-Expressnet 프로토콜의 채널 이용률과 비교하였다. 그 결과 다중 채널 L-Expressnet 프로토콜이 트래픽(traffic)이 증가할 경우 다른 매체 엑세스 방식들보다 더 나은 성능을 보임을 알 수 있었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권2호
• /
• pp.924-944
• /
• 2017

Telecare Medical Information System (TMIS) helps the patients to gain the health monitoring information at home and access medical services over the mobile Internet. In 2015, Das et al proposed a secure and robust user AKA scheme for hierarchical multi-medical server environment in TMIS, referred to as DAKA protocol, and claimed that their protocol is against all possible attacks. In this paper, we first analyze and show DAKA protocol is vulnerable to internal attacks, impersonation attacks and stolen smart card attack. Furthermore, DAKA protocol also cannot provide confidentiality. We then propose a lightweight pseudonym AKA protocol for multi-medical server architecture in TMIS (short for PAKA). Our PAKA protocol not only keeps good security features declared by DAKA protocol, but also truly provides patient's anonymity by using pseudonym to protect sensitive information from illegal interception. Besides, our PAKA protocol can realize authentication and key agreement with energy-saving, extremely low computation cost, communication cost and fewer storage resources in smart card, medical servers and physical servers. What's more, the PAKA protocol is proved secure against known possible attacks by using Burrows-Abadi-Needham (BAN) logic. As a result, these features make PAKA protocol is very suitable for computation-limited mobile device.

• 한국통신학회논문지
• /
• 제38B권11호
• /
• pp.895-901
• /
• 2013

본 논문에서는 USN 기반 다중 프로토콜 게이트웨이 미들웨어의 설계를 제안한다. 제안된 다중 프로토콜 게이트웨이 미들웨어는 송신 메시지 형식을 정의하고, UART를 사용하여 MCU 외부 응용 프로그램에 연결을 위하여 USN 모듈 인터페이스 프로토콜을 사용하였다. 이 경우, 게이트웨이는 설정정보와 함께 지그비 모듈과의 통신 상태를 확인하고, 지그비 시리얼 PDU 형식을 설정한다. 제안된 다중 프로토콜 게이트웨이 미들웨어 실험 결과, 전력제어 및 통신제어 실험을 통해 재생 중계 장치를 사용하는 게이트웨이보다 다중 프로토콜 게이트웨이를 사용하는 통합 프로토콜 게이트웨이의 효율성을 입증하였다.

• 한국IT서비스학회지
• /
• 제11권4호
• /
• pp.195-213
• /
• 2012

In ubiquitous environments, the Intelligent Transportation System (ITS) protocol is a typical service used to improve the quality of life for humans. The Vehicular Ad-hoc Network (VANET) protocol, a part of ITS, needs further study with regards to its support for high reliability, high speed mobility, data transmission efficiency, and so on. The IEEE 802.11 standard provides a high data rate channel, but it was designed for peer-to-peer network protocols. IEEE 802.11p also provides a high data rate channel, however, it only facilitates communication between roadside and on-board equipment. A VANET has characteristics that enable its topology to change rapidly; it can also be expanded to a multi-hop range network during communication. Therefore, the VANET protocol needs a way to infer the current topology information relating to VANET equipped vehicles. In this paper, we present the Multi-Beacon MAC Protocol, and propose a method to resolve the problem of beacon collisions in VANET through the use of this Multi-Beacon MAC protocol. Evaluation of the performance of Multi-Beacon MAC protocol by means of both mathematical analyses and simulation experiments indicate that the proposed method can effectively reduce beacon collisions and improve the throughput and the delay between vehicles in VANET systems.