• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.3
• /
• pp.446-457
• /
• 2017

In order to reduce the size of frame memory or bus bandwidth, frame memory compression (FMC) recompresses reconstructed or reference frames of video codecs. This paper proposes a novel FMC design based on discrete wavelet transform (DWT) - set partitioning in hierarchical trees (SPIHT), which supports fine-scalable throughput and is area-efficient. In the proposed design, multi-cores with small block sizes are used in parallel instead of a single core with a large block size. In addition, an appropriate pipelining schedule is proposed. Compared to the previous design, the proposed design achieves the processing speed which is closer to the target system speed, and therefore it is more efficient in hardware utilization. In addition, a scheme in which two passes of SPIHT are merged into one pass called merged refinement pass (MRP) is proposed. As the number of shifters decreases and the bit-width of remained shifters is reduced, the size of SPIHT hardware significantly decreases. The proposed FMC encoder and decoder designs achieve the throughputs of 4,448 and 4,000 Mpixels/s, respectively, and their gate counts are 76.5K and 107.8K. When the proposed design is applied to high efficiency video codec (HEVC), it achieves 1.96% lower average BDBR and 0.05 dB higher average BDPSNR than the previous FMC design.

• Journal of Broadcast Engineering
• /
• v.20 no.5
• /
• pp.756-769
• /
• 2015

In this paper, we propose a scalable coding method for high dynamic range (HDR) and standard dynamic range (SDR) videos based on Scalable High Efficiency Video Coding (SHVC). The proposed method has multi-layer coding architecture that consists of base layer for SDR videos and enhancement layer for HDR videos to support the backward compatibility with legacy codec and display devices. Also, to improve coding efficiency of enhancement layers, a global inverse tone mapping is applied to the reconstructed SDR video and the compensated frames are referred for coding of the enhancement layer. The proposed method is found to achieve BD-Rate gain of 43.0% on average (maximum 76.3%) for the enhancement layer and 15.7% on average (maximum 31%) for dual-layer against the SHM 7.0 reference software.

• Journal of Broadcast Engineering
• /
• v.28 no.2
• /
• pp.185-193
• /
• 2023

As many different over-the-top (OTT) services become ubiquitous, demands for high-quality content are increasing. However, high dynamic range (HDR) contents, which can provide more realistic scenes, are still insufficient. In this regard, we propose a new HDR video reconstruction technique using multi-exposure low dynamic range (LDR) videos. First, we align a reference and its neighboring frames to compensate for motions between them. In the alignment stage, we perform content-based alignment to improve accuracy, and we also present a high-resolution (HR) module to enhance details. Then, we merge the aligned features to generate a final HDR frame. Experimental results demonstrate that our method outperforms existing methods.

• Journal of Information Technology Applications and Management
• /
• v.16 no.2
• /
• pp.1-21
• /
• 2009

The balanced scorecard(BSC) framework is a tool for strategic decision making and task support that aims for efficiency in performance management and strategy execution. BSC evolved from an old performance management practice, which tended to be limited to a finance-only perspective, to a new system of corporate management looking at corporate tasks from a multi-dimensional, future-inclined value perspective. This form of BSC amounts to a framework capable of driving management innovation and renewing the ways in which companies conceive their strategy and perform their operations. Since BSC draws integrally on user participation, it can be expected that users' satisfaction with BSC systems is an important factor in systems' success or failure. However, previous studies of the BSC system have not yet considered it as a theoretical model, specifically examining BSC system and task characteristics. To date, only a few studies have put forward plans for the implementation and use of BSC systems, and these studies have the common limitation of failing to consider the circumstances or theoretical structure of the companies for which a BSC system is being proposed. This paper then begins to fill some of this gap by characterizing the BSC system from the perspective of contingency theories. Contingency theories can be particularly useful in the Korean context in exploring how different companies use the BSC system in ways determined by their unique environmental characteristics, which may also determine the performance factors behind the application of a company's particular BSC system. In order to provide concrete suggestions for implanting and using the BSC system from a contingency theory perspective, this study sets out to determine the relationships between the contingency variables affecting BSC system performance and BSC system property variables(in given cases) through an empirical analysis. The study takes into account the perspective from which contingency theory is to be applied in individual cases, sets contingency and BSC property variables with reference to the BSC system user's environment and BSC system's character, and frames initial hypotheses concerning corporate structure and environmental variables and BSC system performance variables with reference to previous studies. A survey was then conducted on users in Korean companies that have implemented the BSC system in order to verify the research model and understand results.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.8 no.1
• /
• pp.67-94
• /
• 1971

Korean fisheries industry holds 57,255 boats amounting to 269,079 tons in gross as of the end of 1967. The boats of the size under 30G.T., about sixty-two per cent of the total in tonnage, are utilized in coastal and their contribution to the total production of Korean fisheries industry is estimated at over seventy-five percent. Hull forms and construction method of them are partly in transition stage to the western tradition from the oriental tradition, which employs the chine-type straight-framed section, and tick and wide wooden planking fastened on naturally bent timber frames. And only about a half of them are mechanized. About fifty-seven per cent, 7,525 boats amounting to 91,751 gross tons, of the coastal and inshore fishing boats are those of the size ranging 5G.T. to 30G.T., which are engaged mostly in draft-and gill-netting, angling, longlining, anchovy seining, squid fishing and set-netting. The important fishing boats forming main structure of the inshore fishing fleets can be classified as 5G.T.-class multi-purpose boats, 10G.T.-class angling/longlining boats and 20G.T.-class drift-/gill-netters mostly utilized in the east-sea, 15G.T.-class anchovy seiner in the south-sea-sea, 20G.T.- and 28G.T.-class stow-netters in the west sea. Each of the three sea regions, east, south, and west, of Korean water has distinctly different characters from one another in topography, geology and sea aspects, and consequently in marine resources, fishing grounds and fishing tactics desired. Hence, the finishing boats in each sea region have also their own characters in hull form, structural features, deck design and equipments. In this report, analyzing the characteristics of the existing inshore fishing boats ranging 5G.T. to 30G.T. in size from view points of naval architecture and engineering, the author made an integrated investigation of their characteristics, covering size and principal dimensions, hull form, deck design, structural features and mechanization, in close connection with the natural circumstances of Korean water and local techno-socio-economic problems, and, finally, made some suggestions for the rational improvement or modernization of the inshore fishing boats. Further details of the characteristics of Korean inshore finishing boats are referred to the drawings of them compiled by the author and given in the reference[23] listed at the end of this report.

• International Journal of Aeronautical and Space Sciences
• /
• v.8 no.1
• /
• pp.10-20
• /
• 2007

For spacecraft attitude control, reaction wheel (RW) steering laws with more than three wheels for three-axis attitude control can be derived by using a control allocation (CA) approach.1-2 The CA technique deals with a problem of distributing a given control demand to available sets of actuators.3-4 There are many references for CA with applications to aerospace systems. For spacecraft, the control torque command for three body-fixed reference frames can be constructed by a combination of multiple wheels, usually four-wheel pyramid sets. Multi-wheel configurations can be exploited to satisfy a body-axis control torque requirement while satisfying objectives such as minimum control energy.1-2 In general, the reaction wheel steering laws determine required torque command for each wheel in the form of matrix pseudo-inverse. In general, the attitude control command is generated in the form of a feedback control. The spacecraft body angular rate measured by gyros is used to estimate angular displacement also.⁵ Combination of the body angular rate and attitude parameters such as quaternion and MRPs(Modified Rodrigues Parameters) is typically used in synthesizing the control command which should be produced by RWs.¹ The attitude sensor signals are usually corrupted by noise; gyros tend to contain errors such as drift and random noise. The attitude determination system can estimate such errors, and provide best true signals for feedback control.⁶ Even if the attitude determination system, for instance, sophisticated algorithm such as the EKF(Extended Kalman Filter) algorithm⁶, can eliminate the errors efficiently, it is quite probable that the control command still contains noise sources. The noise and/or other high frequency components in the control command would cause the wheel speed to change in an undesirable manner. The closed-loop system, governed by the feedback control law, is also directly affected by the noise due to imperfect sensor characteristics. The noise components in the sensor signal should be mitigated so that the control command is isolated from the noise effect. This can be done by adding a filter to the sensor output or preventing rapid change in the control command. Dynamic control allocation(DCA), recently studied by Härkegård, is to distribute the control command in the sense of dynamics⁴: the allocation is made over a certain time interval, not a fixed time instant. The dynamic behavior of the control command is taken into account in the course of distributing the control command. Not only the control command requirement, but also variation of the control command over a sampling interval is included in the performance criterion to be optimized. The result is a control command in the form of a finite difference equation over the given time interval.⁴ It results in a filter dynamics by taking the previous control command into account for the synthesis of current control command. Stability of the proposed dynamic control allocation (CA) approach was proved to ensure the control command is bounded at the steady-state. In this study, we extended the results presented in Ref. 4 by adding a two-step dynamic CA term in deriving the control allocation law. Also, the strict equality constraint, between the virtual and actual control inputs, is relaxed in order to construct control command with a smooth profile. The proposed DCA technique is applied to a spacecraft attitude control problem. The sensor noise and/or irregular signals, which are existent in most of spacecraft attitude sensors, can be handled effectively by the proposed approach.