• Journal of Welding and Joining
• /
• 제16권3호
• /
• pp.44-54
• /
• 1998

In this study a new arc sensor algorithm for automatic weld seam tracking was proposed, which uses the relative welding current variation according to the tip-to-workpiece distance in GMA welding. Since the new developed arc sensor algorithm is not sensitive to unstable factors of arc signal, the system is expected to get rid of the problems of already existing arc sensor system which include the difficulty of modeling the process for various welding conditions and limitation of application to thick plate welding. Thus the system is applicable not only to thick plate welding but also to thin plate welding. To implement the new arc sensor algorithm the system parameters which include sampling time, averaging range, weighting factor of moving averaging, basic compensation time, and basic compensation distance were determined by experimental analysis. Consequently this system has shown the successful tracking capability for the various welding conditions.

• 한국지능시스템학회논문지
• /
• 제8권2호
• /
• pp.128-133
• /
• 1998

본 논문에서는 주어진 칼라 영상열을 분석하여 이동물체 추적을 할수 있는 병렬 프레임워크를 구축한다. 병렬 프레임워크는 크게 탐색 공간 축소 부분과 추적 부분으로 나뉘며 탐색 공간 축소 부분은 퍼지 클러스터링과 칼만 필터를 이용한 예측부분으로 구성되고 추적은 거리변환에 기반을 둔 하우스돌프 거리를 이용해 경계선 정합을 함으로써 이루어진다.

• 한국통신학회논문지
• /
• 제15권12호
• /
• pp.1002-1016
• /
• 1990

본 논문은 스테레오비젼 시스템을 설계 제작하고, 제작된 시스템을 가지고 3차원 이동물체의 변위평가 방법을 제안하였다. 이동물체의 추출은 차영상 알고리즘에 의해 추출하고, 3차원 이동물체의 기하학적인 위치좌표는 2개의 2차원 물체의 면적중심을 합성시켜 구하였다. 3차원 이동물체의 범위평가는 합성된 3차원 좌표값에 의해서 물체의 이동속도 및 거리, 이동궤적, 카메라와 물체 사이의 공간거리를 산출하여 입증하였다.

• 정보과학회 컴퓨팅의 실제 논문지
• /
• 제22권4호
• /
• pp.189-194
• /
• 2016

궤적은 이동체가 움직인 경로이다. IT 기술의 성장은 GPS와 같은 위치 측정 장치를 통해 다양한 이동체의 궤적 데이터를 수집할 수 있게 하였다. 이동체의 궤적은 지리정보시스템(GIS)을 포함한 다양한 연구 분야에서 사용된다. 지리정보시스템 분야에서는 차량의 궤적 데이터를 이용한 전자 도로 지도생성 시도가 많이 이루어져왔다. 이 목표를 이루기 위해서는 같은 도로 상의 궤적들을 모으는 방법이 필요하다. 흔히 프레셰 거리($Fr{\acute{e}}chet$ distance)가 궤적 쌍의 거리를 측정하는데 사용된다. 하지만 프레셰 거리는 대량의 궤적들에 대해서는 계산 시간의 소모가 심하다. 본 논문에서는 궤적들의 인접성 여부를 이산프레셰 거리를 통해 빠르게 구분하는 휴리스틱 알고리즘을 제안한다. 이 알고리즘은 계산되는 거리의 정확도를 낮추는 대신 계산 속도를 높였다. 실험 결과, 제안 방법은 이산 프레셰 거리 대비 95%의 정확도와 최하 65%의 계산 감소율로 거리가 10m 이내인 궤적들을 구분할 수 있었다.

• 한국소음진동공학회논문집
• /
• 제13권6호
• /
• pp.430-437
• /
• 2003

A conveying fluid cantilever pipe subjected to a uniformly distributed tangential follower force and three moving masses upon it constitute this vibrational system. The influences of the velocities of moving masses, the distance between two moving masses, and the uniformly distributed tangential follower force have been studied on the dynamic behavior of a cantilever pipe system by numerical method. The uniformly distributed tangential follower force is considered within its critical value of a cantilever pipe without moving masses, and three constant velocities and three constant distances between two moving masses are also chosen. When the moving masses exist on pipe, as the velocity of the moving mass and the distributed tangential follower force Increases. the deflection of cantilever pipe conveying fluid is decreased, respectively Increasing of the velocity of fluid flow makes the amplitude of a cantilever pipe conveying fluid decrease. After the moving mass passed upon the pipe, the tip- displacement of a pipe is influenced by the coupling effect between interval and velocity of moving mass and the potential energy change of a cantilever pipe. Increasing of the moving mass make the frequency of the cantilever pipe conveying fluid decrease.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.622-627
• /
• 2003

The existing remote control system have some inherent disadvantage of direct control in the limit range. In some special cases, for example, a power apparatus, an unmanned factory, a nuclear factory, a security management system, the tele-operation is needed to control remote robot without limit space. This field is based on the Internet communication. Because the Internet is constructed all over the world. And it is possible that we control remote mobile robot in the long distance. In this paper, we developed a remote control system. This system is divided into two primary parts. These are local site and remote site. There are the moving robot and web server in the remote site and there is the robot control device in local site. The moving robot is moved by two stepper motors and the robot control device consists of SA-1100 micro controller and embedded Linux. And this controller is an embedded system. Public personal computer which is connected the Internet is used for the web server. The web server provides the mobile robot control interface program to the remote controller and captures the image for feedback information. In the whole system, a robot control device is connected with moving robot and web server through the Internet. So the operator can control the moving robot in the distance through the Internet.

• 정보처리학회논문지B
• /
• 제9B권6호
• /
• pp.707-714
• /
• 2002

본 연구에서는 능동카메라에서 취득된 영상에서 이동물체를 효율적으로 추적하기위한 실시간 Hausdorff 정합 알고리즘을 제안하였다. 알고리즘은 이동물체의 윤곽선영상을모델로 사용하고, Hausdorff 거리를 모델과 영상사이의 동일성 판별을 위한 평가함수로 사용하였으며, 실시간 처리를 위하여 Hausdorff 거리를 고속으로 계산하기 위한 등가변환방법과 기존 탐색알고리즘의 탐색회수를 줄이고 성능을 개선할 수 있는 반 교차정합기법을 제안하였다. 실험영상에 대한 모의실험 결과 제안한 알고리즘은 이동물체의 위치를 정확히 탐색할 수 있으며, 실시간 처리가 가능하도록 처리시간을 단축시킬 수 있음을 입증하였다.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2021년도 제64차 하계학술대회논문집 29권2호
• /
• pp.223-224
• /
• 2021

Recently, k-farthest neighbor (kFN) queries have not as much attention as k-nearest neighbor (kNN) queries. Therefore, this study considers moving k-farthest neighbor (MkFN) queries for spatial network databases. Given a positive integer k, a moving query point q, and a set of data points P, MkFN queries can constantly retrieve k data points that are farthest from the query point q. The challenge with processing MkFN queries in spatial networks is to avoid unnecessary or superfluous distance calculations between the query and associated data points. This study proposes a batch processing algorithm, called MOFA, to enable efficient processing of MkFN queries in spatial networks. MOFA aims to avoid dispensable distance computations based on the clustering of both query and data points. Moreover, a time complexity analysis is presented to clarify the effect of the clustering method on the query processing time. Extensive experiments using real-world roadmaps demonstrated the efficiency and scalability of the MOFA when compared with a conventional solution.

• International journal of advanced smart convergence
• /
• 제2권1호
• /
• pp.32-35
• /
• 2013

In this paper we proposed a PTZ camera system which automatically detect and track moving objects in the image. Once a moving object is detected the PTZ camera traces it in real-time. We proposed the control system which does not depend on camera focusing functionality but uses the object's center, moving direction, distance and speed. We implemented the system with the TI DM6446 DSP chip. The experimental result shows that the system has excellent performance for high speed vehicles.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.101-104
• /
• 1996

A new detecting system for moving objects of coastal region has been designed by directional antenna and driving circuits. The designed system has been investigated by CAD for linear and planar antenna arrays of various radiating elements for antenna simulations and by P-spice of device simulations. For detecting the displacement of moving objects, we constructed four wideband dipole antenna, diode switching circuit, mixer, filter and amplifier. The results of antenna receiver were shown a possibility of distance measuring system through phase difference of radiation patterns in antenna simulation